"Super Flying Man" by HoloModel's RC

SUPER FLYING MAN - Turn yourself into a FLYING SUPER HERO!

ALL S CAN BE MERGED TOGETHER

"Short" Video of "SuperFlyingMan" painted as Man of Steel:
https://www.youtube.com/shorts/4vl5JmiQtlA?feature=share

Flight Videos of 6in prop and "Scale" sized cape
-PlaceHolder(Editing) See Superman Video for now-

Flight Video of 7in prop and "OverSized" cape
https://youtu.be/BV1mCbPGQOg

Flight Video of Dual 1807 motor version and "Scale Sized" cape.(Thanks to Tom and "Old Pilot")
https://youtu.be/J2eiPj84g_o

Full Build Instructional Video:
Editing now!

HOW TO ADD YOUR OWN HEAD to "SUPER FLYING MAN":
https://youtu.be/AgnlmPN68yk

Full Video of "My Journey to make him FLY" along with many crashes:
https://youtu.be/khEiZhbBiYY

More Videos available on HoloModel's RC YouTube Channel.

RC-Groups Thread:
https://www.rcgroups.com/forums/showthread.php?4740293-3D-Printed-Super-Flying-Man-by-HoloModel-s-RC

Additional Heads and Symbols HERE:
Reeves and Cavill: https://cults3d.emulatorsite.com/en/creations/super-man-man-of-steel-busts-that-fit-super-flying-man

SnowKing and Josh Bixler: https://cults3d.emulatorsite.com/en/creations/snowking-and-josh-bixler-heads-for-super-flying-man

DESCRIPTION: 3D printed and Foam/FoamBoard HYBRID

-3D Printed body consists of 11 main pieces
-Multiple removeable Heads
-Blank Neck to create YOUR OWN REMOVEABLE HEAD
-2 X Different Chest Symbols included, plus additional ones separately!
-Wing-Requires 2 pieces of foamboard or equivalent
-Optional Wing "Skin" included
-PDF Plans included for foam or FoamBoard Wing. Printable Whole, half, or how they are layed out on each FB Sheet.
-ALL Plans have locations for dual 5-6in differential thrust motors, and Mid-Mounted Pusher locations.
-Foam or Foamboard cape comes in 3 sizes, with optional "SKIN" included for "Most Scale" cape.
-Motor mounts included for "X" mount, 16X19, and 12X16
-Mid-Mounted Pusher with Dual Elevons, or dual with differential thrust
-Optional 3D Printed Rudder. Body has servo wire channel(See video)
-Printable Control Horns Included for two 9g Servos
-Included pictures of different builds (Thanks TBerger for dual motor version)
-Print instructions, Build Recommendations, and Printed Weights included with files
-MeshMixer Save File available to "Add YOUR OWN HEAD"

SPECIFICATIONS:
790-820g without battery(Balances with 4S-2200)
Length-39.5in
Width-31in
CG-Marked inside battery compartment
Elevon Servos are internal(Outer hole in servo for elevons, Center hole for Rudder)

Motor Sizes that have been tested already:
-Mid Mounted 2830 1300KV 4S with 6 and 7in props and 40A ESC
-Mid-Mounted 2836 1500kv 4S with 7in prop and 50A ESC(lots of power)
-Dual 1807 motors with 30A ESC's & 6in props
-Would fly with 2212 2200kv and 6in prop, but recommend a 7in prop and 4S.

REQUIRES:
-Motor and ESC of your choosing
-2X 9G metal geared servos
-2X sheets of FoamBoard or equivalent
-Printer for PDF PLANS (Legal paper size of 8.5x14 works well with only 9 sheets of paper)
-.035-.045mm Music Wire(15-20g)--.035(15g) is plenty strong and easier to work with

Optional:
1 X 8mm wooden dowel or equivalent(Length of arms, also helps with nose-weight)
3D Printed Fin and Rudder with additional servo and extension.

This is a Novelty Flying Man, not an airplane! Intermediate level build and flight skills recommended for "Scale sized" cape especially. "Mid & Oversized" capes are more stable and forgiving, and better for a beginner pilot. Optional "KF" Airfoils are not true 50% "KF" airfoils. They were only meant to strengthen the leading edge of the foam/foamboard wing.

Original models:

Hands of "SuperFlyingMan" and Head of Cavill from:
SuperMan on Pose Stand by Boris3DStudio on Thingiverse.com
https://www.thingiverse.com/thing:4155099

Christopher Reeve Head:
https://www.cgtrader.com/free-3d-models/character/fantasy-character/superman-christopher-reeve-b8fe0688-af9f-453c-965c-61eea247b405

"Night King" head from:
https://www.thingiverse.com/thing:3734828

Cape "SKIN" made using:
realistic-set-red-cloaks-with-hood-flowing-silk-fabrics-isolated-white
Designed by vectorpocket / Freepik

Please Like and/or Rate if you have ed and printed!

PRINTS WITHOUT !

2 walls
.40 Wall Width
2 Walls and 2% Gyroid Infill works for ALL. Feet could be thicker or stronger if desired at cost of nose-weight.

(SEE CHART or "notes" in 3MF Files)
-Head- 3 Tops, 2 Bottoms, 2 Perimeters, 2-3% Gyroid.
-Feet- 3 Tops, 2 Bottoms, 2-3 Perimeters, 2-3% Gyroid.
-Rest- 3 Tops, 2 Bottoms, 2 Perimeters. 1.5-2% Gyroid.
-Motor Mount- Preferably ASA, if not then ABS.
-Control Horns- Recommend ASA, if not then Pre-Foamed or PLA+

G-Codes and 3MF Profiles made with .60 Flow and 250deg(E-Sun). If using another brand LW-PLA, tune Flow Rate down about 6-12% for cleaner print results(Not Required). Instructions inside PrusaSlicer 3MF Files