Kobra 3 - ULTIMATE ACE-PRO Fixation au plafond

The rear feet have an opening that could be used. How to you plan on bolting them down? With screws?

I was using your "Kobra 3 - Bold Down Foot Pad", and yes, they are bolted down.

I could easily modify the design for the front feet by removing the bottom layer in which case the front feet would be constrained but would rest on the table (let me know if this works). You can also easily screw down the rear feet. Do you wish to do both front and rear?

The front would be enough I would say. That would be great if you can do that.

I will look into it in the next 2-3 days and post a revised model on Makeronline. Thank you

They should be tight but not to the extent they split. It could be shrinkage or the opposite. What filament are you using?

Happy to hear this. Thank you for posting and the .

The tray cabinet at the top holds everything together so it is indispensable. The issue I foresee you may have is opening the Ace to change filament. How much extra space do you have to open the lid? If you do not have any then a side solution such as the Sidekick may be better.

Hi. Thank you for the . The BP stopper is the rear stop for your build plates - so it does not fall from the back

awesome thank you! almost done printing all the pieces now. so far its looking great

Super. Thank you for the , GL and let me know if you encounter any issues. If it is not asking too much would be great to see builds photos when you are finished

Hello. Thank you the . The profile can easily be changed to the K3. Just drop it down and select K3 and it will slice for the K3 . 15% if fine and PLA is fine. All my models print with that % and I have no issues.

thank you!

Yes, a print profile is provided for the K3

This is a link for LED that are similar to what I used. You can also see my V2 model for links: https://www.amazon.com/dp/B0C1NHYP6X?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

Hi, V2 parts are not compatible as this is a redesign. The rear posts were redesigned in the ultimate version to enhance stability. Have a look at the model pictures. Also check if you printed the rear pads for V2. Thank you.

Hi, thanks for your quick response. What do you mean by rear pads? There's no part with that name in the zip file. Or do you mean this part?

https://cults3d.emulatorsite.com/en/3d-model/tool/foot-for-kobra-3-ace-overhead-mount

Sorry a bit confused here. Are you trying to solve an issue with V2 or with the Ultimate edition model? V2 edition (not the ultimate edition) does not have an integrated rear pad with the model. A separate model is provided for this: https://www.makeronline.com/en/model/KOBRA%203%20-%20ACE%20OVERHEAD%20MOUNT%20REAR%20BRACKETS/29186.html
This may help with stability issues with V2. With V3 the legs were redesigned and a rear pad is now integrated with the model. See picture: https://cults3d.emulatorsite.com/en/3d-model/tool/kobra-3-ultimate-ace-pro-overhead-mount

Sorry for the confusion.
This is about version V2. I wrote here that I just found your ultimate edition today and found the bottom feet very interesting. I would have liked to have reprinted only the bottom feet instead of reprinting all of them again. Thanks for your work!

Ok for V2 have a look at these: https://www.makeronline.com/en/model/KOBRA%203%20-%20ACE%20OVERHEAD%20MOUNT%20REAR%20BRACKETS/29186.html

Thank you for the . I am finishing a tray as an add-on. I thought the hexes would be stored in the drawer. Can you send me a picture of what you would like (here or on Facebook) and I will look at modeling one.

LOL - It will happen as soon as I get my K3 Max. I am informed sometimes in April.

Bummer. Mine showed up yesterday

No they are not as they were redesigned.