Déshydratant - hygromètre pour le guide du filament Ace-pro

Hello, all is supposed to fit. It if tight if you have the Ace-pro V2 but it fits. Can you let me know what does not work. Thank you

i can not add pictures here i would like to show you. Do u have Discord?

Hi, I do not but you can reach out to me on facebook my name is Darren 3d Print. I also made a new set of mounting clips for use with the Snap lock filament guides. Did you see those and did you print those? There are two sets of mounting clips. One for the V1 filament guides and one for the snap lock filament guides. The ones with the desiccant and hygrometer are the V1 you need to print the ones with the Snap lock.

I printed these: https://cults3d.emulatorsite.com/en/3d-model/tool/snap-lock-ace-pro-filament-guides

And when i try now the wide or the small holders, they are not fitting.

Mounting clip (short legs).stl
Mounting clip (wide legs).stl

These are not fitting to that parts of the snaplock:
Large - left side.stl
Large - right side.stl

Thank you for the explanation. The hygrometer and desiccant mount using mounting clips (they bridge two filament guides). These have changed. You need to print new mounting clips (the ones with the snap lock) as the old ones will not fit the snap lock filament guides. The mounting clips are the base that hold the desiccant and hygrometer. You do not have to reprint the containers just the base/clips. Is this where the issue is? If not let me know. Also, the fit in the V2 ace pro (with the guides on the lid) is tighter but everything should fit except for the narrow snap lock guides (see description)

It does not seem like you purchased my model. Do you have multiple s?

If you do or did purchase the model I could try to fit them however I would need exact dimensions. The small tab on yours probably requires a larger opening or an indent.

Sorry, no I haven't made the purchase yet, but I am going to. Yeah, I made a simple case for the meters I have, it wasn't much to it. Once I pay, I'll get the dimensions to you?

Thank you for the clarification. Using the rough dimensions from the site these will be too large for the small holder. They can fit in the large one however. Send me the dimensions and I shall customize it.

45mm, 25mm, 13. L,W,D

Here is what I made... https://1drv.ms/u/c/9170180524aed381/EaUFosRz-W5Lm4PT3JdSDQUBh0srig8yqitlGp3Cd1bUqA?e=0RvEeA

I added a long 45x25x13 mm hygrometer

So, I am a bit confused as to which ones I need.?. I know the long hygrometer, but there are so many options on the rest, I am not sure which ones to get?

Thank you for the purchase. There are two basic lengths. Long and short. These lengths correspond to the type of clip that holds the filament guides together. There are four filament guides. The short clips are used for the extremities (between filament guides 1 and 2 and filament guides 3 and 4) and the long one is for the middle (between filament guides 2 and 3). In your case, you can use two short desiccant holders to attach Filament guides 1 and 2 and filament guides 3 and 4. You would use the long hygrometer holder and it would attach to the clip that holds filament guides 2 and 3 together. Try the file I made for you hygrometer long 45x23x13 - I made it using your dimensions and looking at the unit on Amazon. Let me know how it goes.

What hygrometer are you using? What are the dimensions and where is it not fitting?

uso https://www.amazon.ca/gp/product/B07FJRFH/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
Pero de la radio interior 41,1 mm y el modelo tiene un radio de 35,56 mm

i use https://www.amazon.ca/gp/product/B07FJRFH/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
But from the interior radio 41.1 mm and the model has a radius of 35.56 mm

el modelo short legs si está a 41,1 sin embargo el model wide legs tiene un reborde superior que está más estrecho, a 35,56

The short legs model is at 41.1 however the Model Wide Legs has a higher flange that is narrower, 35.56

Thank you for the information. Sorry if it took me time to get back to you but for some reason I do not get notifications of reply to my replies. I have ed a revised version - file name is "Hygrometer (wide legs) 41 mm. Let me know how it goes. Please send me a new message so I do not miss it.

Tengo inoperativa la impresora, espero me llegue el recambio hoy, cuando imprima la pieza comento si está solucionado, Muchas gracias!

I have the printer inoperative, I hope the replacement comes today, when it prints the piece I comment if it is solved, thank you very much!

gracias

imprimido y funcionando! muchas gracias!

Printing and working! thank you so much!

Here is a link: https://www.amazon.ca/gp/product/B07FJRFH/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

They also are sold in pairs.

I am getting some delivered tomorrow or Monday. If you have not printed the holder pls wait as I will make sure it will fit properly. I used the dimensions from the link.

If you cannot find it in your country substitute with a round one and send me the dimensions and I will model it for you. Also, if you prefer I can send you the STEP for the hygrometer holder.

Thanks! I have gotten your model and will print them out soon. I have also ordered the pair of round hygrometers and will let you know if they fit.

Amazon finally deliver two new types of hygrometers. I will post updated models with links later today. Thank you