Aller au contenu

Chargeur à chenilles 1/14 - Kitten 937

Main2.jpg Chargeur à chenilles 1/14 - Kitten 937
03.jpg Chargeur à chenilles 1/14 - Kitten 937
ripper.jpg Chargeur à chenilles 1/14 - Kitten 937
multipurpose-bucket.jpg Chargeur à chenilles 1/14 - Kitten 937
build-manual.jpg Chargeur à chenilles 1/14 - Kitten 937
lift.jpg Chargeur à chenilles 1/14 - Kitten 937
multi1.jpg Chargeur à chenilles 1/14 - Kitten 937
01.jpg Chargeur à chenilles 1/14 - Kitten 937
multi2.jpg Chargeur à chenilles 1/14 - Kitten 937
suspension.jpg Chargeur à chenilles 1/14 - Kitten 937
02.jpg Chargeur à chenilles 1/14 - Kitten 937
multi3.jpg Chargeur à chenilles 1/14 - Kitten 937
04.jpg Chargeur à chenilles 1/14 - Kitten 937
05.jpg Chargeur à chenilles 1/14 - Kitten 937
06.jpg Chargeur à chenilles 1/14 - Kitten 937
07.jpg Chargeur à chenilles 1/14 - Kitten 937
tracks.jpg Chargeur à chenilles 1/14 - Kitten 937
Publicité
Partager
Ajouter à
Make
Publicité
?
Qualité de la création : 5/5 (1 vote)
Évaluation des membres sur l’imprimabilité, l’utilité, les détails, etc.
Licence
Usages
Format du design 3D
3 fichiers (TXT et ZIP) Fermer
  • ChangeLog v1.7.txt
  • Kitten 937 Metal Plated Update V1.01.zip
    • STL/Cabin/Cab interior.stl
    • STL/Cabin/Cab Main.stl
    • STL/Cabin/Cab Rockguard.stl
    • STL/Cabin/Cab Roof AC.stl
    • STL/Cabin/Cab Roof side A.stl
    • STL/Cabin/Cab Roof side B.stl
    • STL/Cabin/Cab Roof.stl
    • STL/Chassis/Chassis Belly Front.stl
    • STL/Chassis/Chassis Belly Middle.stl
    • STL/Chassis/Chassis Crossmember Tanks.stl
    • STL/Chassis/Chassis FR Arm Footsteps.stl
    • STL/Chassis/Chassis FR belly.stl
    • STL/Chassis/Chassis FR Middle.stl
    • STL/Chassis/Chassis FR motor Spacers.stl
    • STL/Chassis/Chassis FR Side.stl
    • STL/Chassis/Chassis FR SideM.stl
    • STL/Chassis/Chassis Main.stl
    • STL/Chassis/Chassis MainM.stl
    • STL/Chassis/Chassis Pendulum Mount.stl
    • STL/Chassis/Chassis Pendulum.stl
    • STL/Chassis/Chassis Rear Plate.stl
    • STL/Chassis/Chassis Rear Sides.stl
    • STL/Chassis/Hood Air Intake.stl
    • STL/Chassis/Hood Exhaust.stl
    • STL/Chassis/Hood Grille.stl
    • STL/Chassis/Hood.stl
    • STL/Chassis/Hood2 Air Intake.stl
    • STL/Chassis/Hood2 Exhaust.stl
    • STL/Chassis/Hood2 mid.stl
    • STL/Chassis/Hood2 rear.stl
    • STL/Chassis/Hood2.stl
    • STL/Lifting Arms/Arm footsteps.stl
    • STL/Lifting Arms/LA Arm Railing.stl
    • STL/Lifting Arms/LA Arm.stl
    • STL/Lifting Arms/LA ArmM.stl
    • STL/Lifting Arms/LA BucketLink.stl
    • STL/Lifting Arms/LA Lifting Arms.stl
    • STL/Lifting Arms/LA Lifting Link.stl
    • STL/Lifting Arms/LA Pendulum Mount.stl
    • STL/Lifting Arms/LA Pendulum V2.stl
    • STL/Lifting Arms/LA Pendulum.stl
    • STL/Lifting Arms/LA SteelArm Mount.stl
    • STL/MultiBucket Variant2/Guard.stl
    • STL/MultiBucket Variant2/GuardV2.stl
    • STL/MultiBucket Variant2/R wall Mid A.stl
    • STL/MultiBucket Variant2/R wall Mid B.stl
    • STL/MultiBucket Variant2/R wall Side A.stl
    • STL/MultiBucket Variant2/R wall Side B.stl
    • STL/MultiBucket Variant2/Side A.stl
    • STL/MultiBucket Variant2/Side B.stl
    • STL/MultiBucket Variant2/Spacers.stl
    • STL/MultiBucket Variant2/Teeth.stl
    • STL/Ripper/Ripper what you need.txt
    • STL/Ripper/STL/Ripper Blades.stl
    • STL/Ripper/STL/Ripper Links.stl
    • STL/Ripper/STL/Ripper Rear Chassis.stl
    • STL/Ripper/STL/Ripper Spacers.stl
    • STL/Ripper/STL/Ripper.stl
    • STL/Running Gear/Drive Sprockets.stl
    • STL/Running Gear/motorCovers.stl
    • STL/Running Gear/RG inside.stl
    • STL/Running Gear/RG insideM.stl
    • STL/Running Gear/RG mid.stl
    • STL/Running Gear/RG midM.stl
    • STL/Running Gear/RG outside.stl
    • STL/Running Gear/RG outsideM.stl
    • STL/Running Gear/RG Sprocket Covers.stl
    • STL/Running Gear/RGfrontIdlers.stl
    • STL/Running Gear/RGtrackTensioners.stl
    • STL/Running Gear/Roller Spacers 3d Printed Tracks.stl
    • STL/Running Gear/Roller Spacers Steel Chain.stl
    • STL/Running Gear/SteelChain Spacers.stl
    • Metal Plated Update Youtube.url
    • Metal files/DXF/v1 Arm.dxf
    • Metal files/DXF/v1 Belly Plate.dxf
    • Metal files/DXF/v1 Drive Sprocket.dxf
    • Metal files/DXF/v1 Lifting Cover.dxf
    • Metal files/DXF/v1 Main Chassis.dxf
    • Metal files/DXF/v1 Pendulum Link.dxf
    • Metal files/DXF/v1 Rear Plate.dxf
    • Metal files/DXF/v1 Roof Plate.dxf
    • Metal files/DXF/v1 Running Gear Inside.dxf
    • Metal files/DXF/v2 Lifting Motor Plate.dxf
    • Metal files/STEP/v1 Arm.stp
    • Metal files/STEP/v1 Belly Plate.stp
    • Metal files/STEP/v1 Drive Sprocket.stp
    • Metal files/STEP/v1 Lifting Cover.stp
    • Metal files/STEP/v1 Main Chassis.stp
    • Metal files/STEP/v1 Pendulum Link.stp
    • Metal files/STEP/v1 Rear Plate.stp
    • Metal files/STEP/v1 Roof Plate.stp
    • Metal files/STEP/v1 Running Gear Inside.stp
    • Metal files/STEP/v2 Lifting Motor Plate.stp
    • Metal files/DXF/v1 Running Gear Outside.dxf
    • Metal files/STEP/v1 Running Gear Outside.stp
  • Kitten 937v1.7 by burnie222rc.zip
    • HELP/What you need 3d printed Tracks.txt
    • HELP/What you need SCREWLIST.txt
    • HELP/What you need Steel Chains.txt
    • HELP/What you need.txt
    • STL/Buckets/Standard Bucket/Main.stl
    • STL/Buckets/Standard Bucket/teeth.stl
    • STL/Cabin/Cab AC.stl
    • STL/Cabin/Cab interior.stl
    • STL/Cabin/Cab Main.stl
    • STL/Cabin/Cab Roof side A.stl
    • STL/Cabin/Cab Roof side B.stl
    • STL/Cabin/Cab Roof.stl
    • STL/Chassis/Chassis Front Middle.stl
    • STL/Chassis/Chassis Front Motorside.stl
    • STL/Chassis/Chassis Front MotorsideM.stl
    • STL/Chassis/Chassis Lower Front.stl
    • STL/Chassis/Chassis Lower Mid Rear.stl
    • STL/Chassis/Chassis Lower Mid.stl
    • STL/Chassis/Chassis Lower Rear.stl
    • STL/Chassis/Chassis Main Side.stl
    • STL/Chassis/Chassis Main SideM.stl
    • STL/Chassis/Chassis Rear sides.stl
    • STL/Chassis/Chassis Top Cab Brace.stl
    • STL/Chassis/Cylinder Shields.stl
    • STL/Chassis/Front Pendulum Mount.stl
    • STL/Chassis/Hood Air Intake.stl
    • STL/Chassis/Hood Exhaust.stl
    • STL/Chassis/Hood Grille.stl
    • STL/Chassis/Hood.stl
    • STL/Chassis/Motor Spacers.stl
    • STL/Lifting Arms/Arm footsteps.stl
    • STL/Lifting Arms/BucketLink v1.stl
    • STL/Lifting Arms/Lifting Arms v1.stl
    • STL/Lifting Arms/lifting link v1.stl
    • STL/Lifting Arms/Pendulum Mount v1.stl
    • STL/Lifting Arms/Pendulum V1.stl
    • STL/Running Gear V2/RGfrontIdlers.stl
    • STL/Running Gear V2/RGtrackTensioners.stl
    • STL/Running Gear V2/Roller Spacers 3d Printed Tracks.stl
    • STL/Running Gear V2/Roller Spacers Steel Chain.stl
    • STL/Running Gear V2/SteelChain Spacers.stl
    • STL/Running Gear V2/TrackPad.stl
    • STL/Running Gear V2/V2RGinside.stl
    • STL/Running Gear V2/V2RGinsideM.stl
    • STL/Running Gear V2/V2RGmid.stl
    • STL/Running Gear V2/V2RGmidM.stl
    • STL/Running Gear V2/V2RGoutside.stl
    • STL/Running Gear V2/V2RGoutsideCover.stl
    • STL/Running Gear V2/V2RGoutsideCoverM.stl
    • STL/Running Gear V2/V2RGoutsideM.stl
    • STL/Window Template.stl
    • Build Manual/Kitten 937 build Series Youtube.url
    • STL/Running Gear V2/steelChain Trackpad.stl
    • STL/Running Gear V2/steelChain Tracks x10.stl
    • STL/Running Gear V2/Drivesprocket B.stl
    • STL/Running Gear V2/Drivesprocket.stl
    • STL/Running Gear V2/motorCovers.stl
    • Build Manual/Ripper/Ripper what you need.txt
    • STL/Ripper/STL/Ripper Blades.stl
    • STL/Ripper/STL/Ripper Links.stl
    • STL/Ripper/STL/Ripper Rear Chassis.stl
    • STL/Ripper/STL/Ripper Spacers.stl
    • STL/Ripper/STL/Ripper.stl
    • STL/Buckets/Multibucket/Actuator link.txt
    • STL/Buckets/Multibucket/sides.stl
    • STL/Buckets/Multibucket/Spacers.stl
    • STL/Buckets/Multibucket/teeth.stl
    • STL/Ripper/Ripper what you need.txt
    • STL/Buckets/Multibucket/rWallMidDrvV2.stl
    • STL/Buckets/Multibucket/rWallMidPasV2.stl
    • STL/Buckets/Multibucket/rWallOutDrvV2.stl
    • STL/Buckets/Multibucket/rWallOutPasV2.stl
    • STL/Lifting Arms/ArmV2 A.stl
    • STL/Lifting Arms/ArmV2 Ains.stl
    • STL/Lifting Arms/ArmV2 B.stl
    • STL/Lifting Arms/ArmV2 Bins.stl
    • STL/Lifting Arms/ArmV2 Railing.stl
    • STL/Chassis/Front pendulum V2.stl

En savoir plus sur les formats
Dernière mise à jour 2025-03-26 à 13h33
Date de publication 2024-01-02 à 3h40
Numéro du design 1681608
burnie222

burnie222

Compte certifié
  • er
Vous rencontrez un souci avec ce design ? Signaler un problème.

Info sur le modèle

Description du modèle 3D

EDIT:
26th March 2025 - Fixed a faulty DXF file named "v1 Running Gear Outside.dxf" , and I also fixed the STEP version for this file incase something was wrong with that too.
Metal Plated Update V1.01 to get this update!
4th March 2025 -
Metal Plated Kitten 937 update !
This huge update will allow you to create a metal plated tracked loader, the metal plates will allow you to stiffen up the chassis and increase durability alot.
Files for cutting the metal plates are included, New parts to fit the Kitten 937 like Rock guard shield infront of windshield, New style enginehood, and another 4in1 bucket variant!
the "Kitten 937 Metal Plated Update.zip" to get the files.

23rd May 2024 - Made a stronger Front Pendulum. Find it in the Chassis folder.
9th May 2024 - Fixed a mistake in the design of the Lifting Arms, the old arms broke around a screwmount, this update adds New Arms that are much stronger and durable.
I also fixed a problem with the Multifunction Bucket rubbing into the tracks. You will have to print the new bucket parts in order to fix this problem. V1.6 to get the update.
10th April 2024 - Fixed a mistake in Buildmanual Phase 1 page 16. It said to use 34 steel chain Tracklinks, when the correct number is apparantly 32. V 1.5d to get the update.
16th February 2024 - fixed a big typo in the "What you need Steel Chains.txt" file and updated info in buildmanual about how many trackpads are needed for steel chains.
V1.5c to get the update.
29th January 2024 - Added files for a Multi-Purpose Bucket. V1.5 to get them.
25th January 2024 - Added files for a Ripper. V1.4 to get them.
9th January 2024 - Added a motorcover for the Drivemotors. The file is called motorCovers.stl and is in the Running Gear folder.
4th January 2024 - Fixed a small issue with the Drivesprocket files, the holes were too small.

Build yourself a fully electric hobbygrade Tracked Loader!
1:14th scale.

Printable on a 22x22 buildplate!

Full partslist with links to all the parts you need to get started!
An overview of all the screws needed is also included.

-Choose between 3d printed tracks, or steel chain tracks!

-Choose between fully 3d printed chassis, or Steel plated chassis!

58 page detailed build manual AND a youtube build series to provide as much information and help as I possibly can!

5840-555 WormGear motors for trackdrives, extremely powerful and durable motors with 8mm axle shaft!

5840-31zy Dual Shaft motor for the Lifting mechanism, superstrong motor that will lift any load in your bucket 30,5 cm off the ground!

Two 12v actuators makes sure the bucket get loaded and emptied in no time!

Runs off a 3s 11,1v LiPo battery.

This has been a very big challenge for me to make availiable for everyone, I have tried my best at making all the parts as friendly as I possibly can.

You can watch the entire 3d Printed plastic build on youtube, and see how I built mine here:
https://www.youtube.com/playlist?list=PLdh4mhBIIM2LvN1x7bYKm5vPzC8feO9Pm

And you can see the entire Steel Plated build on youtube here:
https://www.youtube.com/playlist?list=PLdh4mhBIIM2KGeXY7Em4nA015HgUZ1fVg

This is an entirely 3d printed plastic build, so there is No need for any steel-work.

You will need alot of different screws and hardware, list included.

IMPORTANT NOTICE:
I do not show you how to setup your controller or how to put the electronics together in the guide. But there is a detailed video of how to do it here:
https://youtu.be/hoJ6KEgcggk

Paramètres de fabrication

épaisseur des couches supérieure et inférieure d'au moins 1,2 mm, 3 murs, 30 % de remplissage

Catégories

Maison

Mots-clefs

Publicité

Page traduite par traduction automatique. Voir la version originale.

Vous souhaitez soutenir Cults ?

Vous aimez Cults et vous avez envie de nous aider à continuer l’aventure en toute indépendance ? Sachez que nous sommes une petite équipe de 4 personnes et qu’il est donc très simple de nous soutenir pour maintenir l’activité et créer les futurs développements. Voici 3 solutions accessibles à tous :

  • PUBLICITÉ : Désactivez votre bloqueur de publicité.
  • DON : Faire un don via Ko-Fi 💜.
  • BOUCHE À OREILLE : Invitez vos amis à venir découvrir le site et les magnifiques fichiers 3D partagés par la communauté !

Partager et télécharger sur Cults3D c’est garantir que les designs restent bien entre les mains de la communauté des makers ! Et non celles des géants de l’impression 3D ou du software qui possèdent les plateformes concurrentes et qui exploitent les designs pour leurs propres intérêts commerciaux.

Cults3D est un site indépendant et autofinancé qui n’a de compte à rendre à aucun investisseur ou aucune marque. La quasi totalité des revenus du site sont reversés aux makers de la plateforme. Les contenus publiés sur le site servent uniquement les intérêts de leurs auteurs et pas ceux des marques d’imprimantes 3D qui souhaitent aussi contrôler le marché de la modélisation 3D.