Aller au contenu

1/14 Chaton de la pelleteuse 394

Main.jpg 1/14 Chaton de la pelleteuse 394
a.jpg 1/14 Chaton de la pelleteuse 394
manual.jpg 1/14 Chaton de la pelleteuse 394
b.jpg 1/14 Chaton de la pelleteuse 394
c.jpg 1/14 Chaton de la pelleteuse 394
d.jpg 1/14 Chaton de la pelleteuse 394
dimensions.jpg 1/14 Chaton de la pelleteuse 394
e.jpg 1/14 Chaton de la pelleteuse 394
electronics.jpg 1/14 Chaton de la pelleteuse 394
f.jpg 1/14 Chaton de la pelleteuse 394
g.jpg 1/14 Chaton de la pelleteuse 394
Publicité
Partager
Ajouter à
Make
Publicité
?
Qualité de la création : 5/5 (4 votes)
Évaluation des membres sur l’imprimabilité, l’utilité, les détails, etc.
Licence
Usages
Format du design 3D
2 fichiers (ZIP) Fermer
  • Kitten 394 DXF files V3.zip
    • Kitten 394 DXF files V2/Arms/Boom V5 Mirrored.dxf
    • Kitten 394 DXF files V2/Arms/Boom V5.dxf
    • Kitten 394 DXF files V2/Arms/Stick V5 Mirrored.dxf
    • Kitten 394 DXF files V2/Arms/Stick V5.dxf
    • Kitten 394 DXF files V2/Overcarriage/Floor plate with 90degree flanges.dxf
    • Kitten 394 DXF files V2/Overcarriage/Floor plate without 90degree flanges.dxf
    • Kitten 394 DXF files V2/Undercarriage/UC349 bottom cover.dxf
    • Kitten 394 DXF files V2/Undercarriage/UC349 top cover.dxf
    • Kitten 394 DXF files V2/Undercarriage/UC352 bottom cover.dxf
    • Kitten 394 DXF files V2/Undercarriage/UC352 top cover.dxf
  • KittenE394 by Burnie222rcV1.6.zip
    • STLs/ArmsV5/boom cylinder motormount.stl
    • STLs/ArmsV5/boomA.stl
    • STLs/ArmsV5/boomB.stl
    • STLs/ArmsV5/boomC.stl
    • STLs/ArmsV5/boomOutA.stl
    • STLs/ArmsV5/boomOutAm.stl
    • STLs/ArmsV5/boomOutB.stl
    • STLs/ArmsV5/boomOutBm.stl
    • STLs/ArmsV5/boomOutC.stl
    • STLs/ArmsV5/boomOutCm.stl
    • STLs/ArmsV5/bucket cylinder motormount.stl
    • STLs/ArmsV5/BucketLinks.stl
    • STLs/ArmsV5/Cable Lead.stl
    • STLs/ArmsV5/cylcover.stl
    • STLs/ArmsV5/stick cylinder motormount A.stl
    • STLs/ArmsV5/stick cylinder motormount B.stl
    • STLs/ArmsV5/StickA.stl
    • STLs/ArmsV5/StickAm.stl
    • STLs/ArmsV5/StickB onepiece.stl
    • STLs/ArmsV5/StickB.stl
    • STLs/ArmsV5/StickBm.stl
    • STLs/Buckets/Ripper/STL/Ripper side A.stl
    • STLs/Buckets/Ripper/STL/Ripper side B.stl
    • STLs/Buckets/Slinger/STL/knife.stl
    • STLs/Buckets/Slinger/STL/rearwallA.stl
    • STLs/Buckets/Slinger/STL/rearwallB.stl
    • STLs/Buckets/Slinger/STL/sideA.stl
    • STLs/Buckets/Slinger/STL/sideB.stl
    • STLs/Buckets/Slinger/STL/teeth with brim.stl
    • STLs/Buckets/Slinger/STL/teeth without brim.stl
    • STLs/Buckets/Standard Bucket/rWallA.stl
    • STLs/Buckets/Standard Bucket/rWallB.stl
    • STLs/Buckets/Standard Bucket/sideA.stl
    • STLs/Buckets/Standard Bucket/sideB.stl
    • STLs/Buckets/Standard Bucket/teeth with premade brim.stl
    • STLs/Buckets/Standard Bucket/teeth.stl
    • STLs/Cabin/Cab door.stl
    • STLs/Cabin/Cab interior chair A.stl
    • STLs/Cabin/Cab interior chair B.stl
    • STLs/Cabin/Cab interior main.stl
    • STLs/Cabin/Cab main.stl
    • STLs/Cabin/Cab side.stl
    • STLs/Cabin/windshield wiper.stl
    • STLs/Overcarriage/air filter.stl
    • STLs/Overcarriage/Batterytray.stl
    • STLs/Overcarriage/Boommount drv.stl
    • STLs/Overcarriage/Boommount pas.stl
    • STLs/Overcarriage/catwalk cabin.stl
    • STLs/Overcarriage/catwalk plate A.stl
    • STLs/Overcarriage/catwalk plate B.stl
    • STLs/Overcarriage/catwalk plate C.stl
    • STLs/Overcarriage/counterweight.stl
    • STLs/Overcarriage/Exhaust high.stl
    • STLs/Overcarriage/Exhaust.stl
    • STLs/Overcarriage/fake cylinders.stl
    • STLs/Overcarriage/Hand Rails A.stl
    • STLs/Overcarriage/Hand Rails B.stl
    • STLs/Overcarriage/main chassis middle.stl
    • STLs/Overcarriage/main floor drv f.stl
    • STLs/Overcarriage/main floor drv r.stl
    • STLs/Overcarriage/main floor pas f.stl
    • STLs/Overcarriage/main floor pas r.stl
    • STLs/Overcarriage/mirrors.stl
    • STLs/Overcarriage/side drv f.stl
    • STLs/Overcarriage/side drv r grille.stl
    • STLs/Overcarriage/side drv r.stl
    • STLs/Overcarriage/side pas f cover.stl
    • STLs/Overcarriage/side pas f.stl
    • STLs/Overcarriage/side pas m.stl
    • STLs/Overcarriage/side pas r.stl
    • STLs/Overcarriage/swingmotor mount.stl
    • STLs/Overcarriage/top counterweight.stl
    • STLs/Overcarriage/top cover R 1.stl
    • STLs/Overcarriage/top cover R 2.stl
    • STLs/Overcarriage/top cover R 3.stl
    • STLs/Overcarriage/top cover.stl
    • STLs/Overcarriage/top motorcover A.stl
    • STLs/Overcarriage/top motorcover B 349.stl
    • STLs/Overcarriage/top motorcover B 352.stl
    • STLs/Overcarriage/top motorcover onepiece 349.stl
    • STLs/Overcarriage/top motorcover onepiece 352.stl
    • STLs/Undercarriage/RGDriveSprocket2.stl
    • STLs/Undercarriage/RGMainBeam349Front.stl
    • STLs/Undercarriage/RGMainBeam349Rear.stl
    • STLs/Undercarriage/RGMainBeam352Front.stl
    • STLs/Undercarriage/RGMainBeam352Rear.stl
    • STLs/Undercarriage/SlewRing hole Template.stl
    • STLs/Undercarriage/slewring stability piece.stl
    • STLs/Undercarriage/Undercarriage 3d printed tracks/3dTgro44.stl
    • STLs/Undercarriage/Undercarriage 3d printed tracks/3dTgro44B.stl
    • STLs/Undercarriage/Undercarriage 3d printed tracks/3dTgro54.stl
    • STLs/Undercarriage/Undercarriage 3d printed tracks/3dTgro65.stl
    • STLs/Undercarriage/Undercarriage 3d printed tracks/BottomRollers.stl
    • STLs/Undercarriage/Undercarriage 3d printed tracks/RGChainTensioner.stl
    • STLs/Undercarriage/Undercarriage 3d printed tracks/RGDriveSprocket.stl
    • STLs/Undercarriage/Undercarriage 3d printed tracks/RGidlewheel.stl
    • STLs/Undercarriage/Undercarriage 3d printed tracks/RGmid.stl
    • STLs/Undercarriage/Undercarriage 3d printed tracks/RGmidM.stl
    • STLs/Undercarriage/Undercarriage 3d printed tracks/TopRollers.stl
    • STLs/Undercarriage/Undercarriage Steel chain/BottomRollers.stl
    • STLs/Undercarriage/Undercarriage Steel chain/chain Trackpad 44.stl
    • STLs/Undercarriage/Undercarriage Steel chain/chain Trackpad 53.stl
    • STLs/Undercarriage/Undercarriage Steel chain/chain Trackpad 64.stl
    • STLs/Undercarriage/Undercarriage Steel chain/RGChainTensioners.stl
    • STLs/Undercarriage/Undercarriage Steel chain/RGDriveSprocket.stl
    • STLs/Undercarriage/Undercarriage Steel chain/RGidlewheel.stl
    • STLs/Undercarriage/Undercarriage Steel chain/RGmid.stl
    • STLs/Undercarriage/Undercarriage Steel chain/RGmidM.stl
    • STLs/Undercarriage/Undercarriage Steel chain/RGRearInside.stl
    • STLs/Undercarriage/Undercarriage Steel chain/RGRearInsideM.stl
    • STLs/Undercarriage/Undercarriage Steel chain/RGRearOutside.stl
    • STLs/Undercarriage/Undercarriage Steel chain/RGRearOutsideM.stl
    • STLs/Undercarriage/Undercarriage Steel chain/TopRollers.stl
    • What you need/What you need 3d Printed Slewring.txt
    • What you need/What you need 3d printed Tracks.txt
    • What you need/What you need Screws.txt
    • What you need/What you need Steel Chains.txt
    • What you need/What you need Steel SlewRing.txt
    • What you need/What you need.txt
    • BuildManual/Watch Buildseries Youtube.url
    • STLs/Undercarriage/2x Steps.stl
    • STLs/3d printed Slewring/inside main 52t.stl
    • STLs/3d printed Slewring/inside top.stl
    • STLs/3d printed Slewring/outside bottom.stl
    • STLs/3d printed Slewring/outside mid.stl
    • STLs/3d printed Slewring/outside top.stl
    • STLs/Undercarriage/Undercarriage Steel chain/RGFrontInsidev2.stl
    • STLs/Undercarriage/Undercarriage Steel chain/RGFrontInsidev2M.stl
    • STLs/Undercarriage/Undercarriage Steel chain/RGFrontOutsidev2.stl
    • STLs/Undercarriage/Undercarriage Steel chain/RGFrontOutsidev2M.stl
    • STLs/Undercarriage/Undercarriage 3d printed tracks/RG FrontOutside v2 M.stl
    • STLs/Undercarriage/Undercarriage 3d printed tracks/RG FrontOutside v2.stl
    • STLs/Undercarriage/Undercarriage 3d printed tracks/RG RearInside v2 M.stl
    • STLs/Undercarriage/Undercarriage 3d printed tracks/RG RearInside v2.stl
    • STLs/Undercarriage/Undercarriage 3d printed tracks/RG RearOutside v2 M.stl
    • STLs/Undercarriage/Undercarriage 3d printed tracks/RG RearOutside v2.stl
    • STLs/Undercarriage/Undercarriage 3d printed tracks/RG FrontInside v2 M.stl
    • STLs/Undercarriage/Undercarriage 3d printed tracks/RG FrontInside v2.stl
    • STLs/3d printed Slewring/swingmotor mount kitten394 V2.stl
    • BuildManual/Phase 2 Slewring/3d Printed slewring/Slewring Assembly youtube.url

En savoir plus sur les formats
Dernière mise à jour 2025-03-03 à 12h22
Date de publication 2023-11-26 à 3h53
Numéro du design 1602951
burnie222

burnie222

Compte certifié
  • er
Vous rencontrez un souci avec ce design ? Signaler un problème.

Info sur le modèle

Description du modèle 3D

A Hydraulic Conversion for this excavator can be found here:
https://cults3d.emulatorsite.com/en/3d-model/home/kitten-e394-hydraulic-conversion

EDIT:
3rd March 2025: Modified and improved the Slewring motorplate for 3d printed slewring, to remove slop and to prevent the motor-bushing to loosen up. Also fixed a few files in the slewring buildmanual folder. V1.6 to get the update.
5th November 2024: The new DXF files had a mistake in the overcarriage folder, the filetype should now be correct. sorry about that. Added updated DXF files for lasercutting the steel plates.
27th October 2024: Added new and updated DXF files for lasercutting the steel plates.
"Kitten 394 DXF files V2.zip" to get them.
10th June 2024: The 3d printed Track's rubbed on the bottom of the undercarriage because the distance between the bearings was too big, this has now been fixed. (steel chain version is unaffected)
Files fixed in this update is in the "Undercarriage 3d printed tracks" folder. v1.5 to get the update!
26th March 2024: Fixed errors in a couple of files in the 3D Printed Tracks folder. "RGfrontInside.stl" and "RGfrontInsideM.stl" files. The first layer problems should now be fixed. V1.04 to get the update.
25th February 2024: Fixed a big problem with 4 files for the SteelChain undercarriage.
"RGFrontInside.stl", "RGFrontInsideM.stl", "RGFrontOutside.stl", and "RGFrontOutsideM.stl" interfered with the big idle wheel. this has now been fixed. V1.3 to get the update.
4th december 2023: Added the files for a 3d printed SlewRing. (I actually forgot to put those files in the zipfile) v1.2 to get the files.
3rd december 2023: Added two missing STL files for the undercarriage. (the two footsteps on the sides) v1.1 to get them.
2nd december 2023: Added 2d DWG and DXF files for the steel parts. and 3d STEP files for the steel parts. This is for the people who wants to have the steel parts machined or lasercut.

Build yourself a fully electric hobbygrade excavator.
The model is a 1/14th scale 50 ton class excavator.

Printable on a 22x22 buildplate!

Full partslist with links to all the parts you need to get started!
An overview of all the screws needed is also included.

100 page detailed build manual to provide as much information and help as I possibly can!

Customize your build with different options:
-Choose between two width's of the excavator with an additional option for Four different trackpad-widths!
-Choose between 3d printed tracks, or steel chain tracks!
-Two buckets and a ripper is included.

This has been a very big challenge for me to make availiable for everyone, I have tried my best at making all the parts as friendly as I possibly can.

You can also watch the entire build on youtube, and see how I built mine here:
https://www.youtube.com/playlist?list=PLdh4mhBIIM2L41c1OqEzcC3UIPebcdfgF

This project is a combination of 3d printing, and metal works. So you will need tools for cutting metal, and drill holes.
I will say that this is a very timeconsuming build, so youll need to be prepared to use some time on it.

You will need alot of different screws and hardware.

This Excavator model is compatible with the electric 40-70 ton quick coupler in my profile here:
https://cults3d.emulatorsite.com/en/3d-model/gadget/quick-coupler-40-70-ton-class

IMPORTANT NOTICE:
I do not show you how to setup your controller or how to put the electronics together in the guide.

Paramètres de fabrication

au moins 3 murs, 1,2 mm d'épaisseur en haut et en bas, 15% de remplissage minimum.

Catégories

Maison

Mots-clefs

Publicité

Page traduite par traduction automatique. Voir la version originale.

Vous souhaitez soutenir Cults ?

Vous aimez Cults et vous avez envie de nous aider à continuer l’aventure en toute indépendance ? Sachez que nous sommes une petite équipe de 4 personnes et qu’il est donc très simple de nous soutenir pour maintenir l’activité et créer les futurs développements. Voici 3 solutions accessibles à tous :

  • PUBLICITÉ : Désactivez votre bloqueur de publicité.
  • DON : Faire un don via Ko-Fi 💜.
  • BOUCHE À OREILLE : Invitez vos amis à venir découvrir le site et les magnifiques fichiers 3D partagés par la communauté !

Partager et télécharger sur Cults3D c’est garantir que les designs restent bien entre les mains de la communauté des makers ! Et non celles des géants de l’impression 3D ou du software qui possèdent les plateformes concurrentes et qui exploitent les designs pour leurs propres intérêts commerciaux.

Cults3D est un site indépendant et autofinancé qui n’a de compte à rendre à aucun investisseur ou aucune marque. La quasi totalité des revenus du site sont reversés aux makers de la plateforme. Les contenus publiés sur le site servent uniquement les intérêts de leurs auteurs et pas ceux des marques d’imprimantes 3D qui souhaitent aussi contrôler le marché de la modélisation 3D.