Version commerciale - Le présentoir Pegboard Spinner : Un rack modulaire pour vos objets

This is the One Time Purchase Commercial Use Version with no Branding. If you prefer to get this item at no additional cost you can Subscribe to my Patreon for a small Monthly fee

If you use these at your Craft Show/Event tag me on Instagram or Tiktok (@bucklenshackle) I'd love to see them in action! For the Personal Use Model (With Branding on Bottom) Click Here: https://cults3d.emulatorsite.com/en/3d-model/gadget/the-pegboard-display-spinner-a-modular-rack-for-your-things

---

This is a Modular Display Rack I created because I needed to display my Paracord and 3D Printed Dragon Keychains at a local Craft Show. I had been using a Pegboard Wall but thought it was too big/bulky. So I created this Spinner to use the large collection of existing Pegboard Hooks I still had. After several months of testing and several spools of filament later I've come up with this working model!

V.2: The Pegboard Display Spinner can be setup with as many tiers as you want! The only limitation is the spacers you choose and the 8mm Rod you sourced. (Redesign adds new Base, Spacers and Spokes)

V.2.1: The Pegboard Display Spinner Base now with Tolerances! All Previous V.2 files work with this V2.1 update. Bases Now updated with 3 different tolerances, 8.0mm, 8.1mm and 8.2mm. Also I've added a Base Test to test tolerances without having to print the whole base. Every 3d Printer will print the BASE TEST differently, choose the corresponding Base model (8.0 ,8.1 or 8.2) that is the closest fit to your 8mm Linear Rod

You will need:
- PETG Filament: I Highly suggest using PETG or better for better strength and stability.
- Standard Pegboard Hooks of any Length: I used 2" Straight Pegboard Hooks.
- An 8mm rod: I used a 600mm Linear Rod (I believe you can find these in varying lengths upto 1500mmm) (I have not tested over 600mm)

V.2 Includes: All Pieces have 8.5mm Holes for ease of spinning. (Both Bases are 8.0mm)

• BNS Pegboard Spinner Rack (Holds 8 Straight Pegboard Hooks)
• BNS Round Shelf 50mm x 204mm (A Shelf for shelving things)
• BNS Octagonal Shelf 50mm x 208mm (A Shelf that better fits the Octagon Theme)
• BNS Spokes Spinner Rack 20mm x 220mm (A Rack for Hanging Things if you dont have Pegboard Hooks.)
• BNS Spacer 30mm (Spacers for varying the height of the Spinner Racks)
• BNS Spacer 50mm
• BNS Spacer 70mm
• BNS Spacer 90mm
• BNS Spacer 120mm
• BNS Spacer 140mm
• BNS Top Cap (A top piece that closes off the end)
• BNS Sign Top Cap (A top piece with a Hole for a Sign)
• BNS Sign Blank (A Sign that slots into BNS Sign Top Cap, add your own text)
• BNS Sign Five Dollar (A Sign that slots into BNS Sign Top Cap, '3D Printed Keychains $5')
• BNS Base W166-H45mm-8.0mm (Octagon Base. Insert Rod, 30mm of the Rod is inserted) Smaller, For Shorter Rods.
• BNS Base W196mm-H75mm-8.0mm (Octagon Base. Insert Rod, 60mm of the Rod is inserted) Larger, More Stability for Longer Rods.

V.2.1 Includes:

• BNS Base Test Tolerances 8.0-8.1-8.2
• BNS Base W166-H45mm-8.1mm
• BNS Base W166-H45mm-8.1mm
• BNS Base W196mm-H75mm-8.2mm
• BNS Base W196mm-H75mm-8.2mm
• 10mm Spacer
• 15mm Spacer
• BNS Round Shelf 70mm x 248mm
• BNS Octagonal Shelf 70mm x 248mm
• BNS Spokes Spinner Rack 30mm x 248mm
• BNS Dragon Racks Large and Small (WORK IN PROGRESS)

Notes:
- If you are printing the Cap/Sign Cap, I would suggest gluing them on to your top most Spacer/Spinner (so it doesn't fall off when spinning). I used Gorilla Glue Adhesive.

• I suggest you add 1" Circle Grip Pads to the bottom of the bases.

• I've included 2 Bases. Either one can be used, they are different heights and widths. The W166-H45mm Base shouldn't be used for Long Rods or Top Heavy Racks. In this case use the W196mm-H75mm Base.

• (Not Included) I am an Authorized Seller of all the files in the pictures. MatMireMakes

UPDATES:
- V.1 September 18, 2022. Original File Released.
- V.2 November 10, 2022. Redesigned all files. Added Base, Spacers of Different Lengths and a Spokes Version.
- V.2.1 March 11-13, 2023. Added Base Tolerances, a Base Tolerance Test and a 10mm an 15mm Spacer.
- V.2.1 August 8, 2023. Added Larger Spokes, Round Shelf and Octagon Shelf to fit printers with larger plates of 256x256.
- V.2.1 April 13, 2024. Added Dragon Racks, Hang your Dragons Vertically! Large and Small included. (WORK IN PROGRESS)

---

Authorized Sellers are the only people allowed to sell these prints.
Authorized Sellers List:

• Buckle N' Shackle From Toronto, ON, Canada Etsy Shop, Facebook, Instagram, Tiktok, Buy Me a Ko-fi, Bucklenshackle.com

---

Videos:

Here’s a TikTok of the V.1 Spinner in action! (Early Test Model): https://www.tiktok.com/@bucklenshackle/video/7145460051065523461

Here’s a How to Video on TikTok of the V.2 Spinner!:
https://www.tiktok.com/@bucklenshackle/video/7164606539838360837

Here’s an Assembly Video on TikTok of the V.2.1 Spinner! (Current Model): https://www.tiktok.com/@bucklenshackle/video/7211548693663714565

Its Modular! Here's an all Pegboard Spinner Version:
https://www.tiktok.com/@bucklenshackle/video/7213896005668900102

Its Modular! Here's a Short Spokes & Shelves Version:
https://www.tiktok.com/@bucklenshackle/video/7265752270820756741

Fonctionne avec le PETG. Je l'ai imprimé avec une buse 0.4 (0.2 Layer Height, 0.4 Width) 3 murs et 25% Infill, Top Concentric Lines. Les s ne sont pas nécessaires.

Ne redimensionnez PAS les fichiers, sinon cela ne fonctionnera pas :)