Aller au contenu

Fourmi mignonne Flexi Print-in-Place

Ant300.gif Fourmi mignonne Flexi Print-in-Place
Ant03.jpg Fourmi mignonne Flexi Print-in-Place
Ant04.jpg Fourmi mignonne Flexi Print-in-Place
Ant06.jpg Fourmi mignonne Flexi Print-in-Place
Ant12.jpg Fourmi mignonne Flexi Print-in-Place
Ant11.jpg Fourmi mignonne Flexi Print-in-Place
Ant05.jpg Fourmi mignonne Flexi Print-in-Place
Ant07.jpg Fourmi mignonne Flexi Print-in-Place
Ant01.jpg Fourmi mignonne Flexi Print-in-Place
Ant02.jpg Fourmi mignonne Flexi Print-in-Place
Ant13.jpg Fourmi mignonne Flexi Print-in-Place
Flexi Factory Ant_Updated.stl Fourmi mignonne Flexi Print-in-Place
Publicité
Partager
Ajouter à
Make
Publicité
?
Qualité de la création : 4,4/5 (37 votes)
Évaluation des membres sur l’imprimabilité, l’utilité, les détails, etc.
Licence
Format du design 3D
1 fichier (STL) Fermer
  • Flexi Factory Ant_Updated.stl

En savoir plus sur les formats
Taille du modèle 3D X 147  × Y 107  × Z 33,2  mm
Dernière mise à jour 2023-01-14 à 19h23
Date de publication 2020-09-16 à 20h06
Numéro du design 200499
FlexiFactory

FlexiFactory

Compte certifié
  • er
Vous rencontrez un souci avec ce design ? Signaler un problème.

20 commentaires

Ajouter un commentaire

20 commentaires

klausjaeger
klausjaeger

Hallo,

Danke für die tolle Arbeit.
LittlePenguin
LittlePenguin

HI, I need help I purchased the CUTE FLEXI PRINT-IN-PLACE ANT, and I cannot print it of either printer i own, Voxelab x2 no modifications or Snapmaker Artisian all in one. Every time I have attempted to print if when looking at it front on the right-hand leg breaks and if I let it print the whole thing just go to pieces. What can I do?
turtle3dcreations
turtle3dcreations

Am I allowed to sell on Etsy or eBay once I purchase the file?
embartusch
embartusch

I love these ants.
Already printed several, no problem even scaling down to 60%.
Will try now the updated model.
lakrima
lakrima

hi, the feet are not pressed properly. what can I do?
print speed:50
nozzle temperature:200
table temperature: 60
thanks.
izy_boi120
izy_boi120

not free sucks

FlexiFactory
FlexiFactory

Look at it this way, This is my business. if I wasn't able to make a profit deg these flexis, they wouldn't exist. Plus, I really don't charge much.

  • 6 j’aimes
brettmaxwell
brettmaxwell

I have purchased a few of your designs, I'm very much a beginner, but your designs are great, I am doing the ants and Sloth can you advise the best nozzle temp I currently have the nozzle set to 215 but thinking may 190 ? and the bed to 60. I think your files are extremely reasonable for the work that goes into them.

Would love to see more Christmas files if possible.
mochobranco
mochobranco

awesome models

  • 1 j’aime
mrcaland
mrcaland

Ant is Amazing. great design work and looks great. !!!

  • 1 j’aime
kalifas
kalifas

I have bought several of your models and I am very satisfied. It would be great if you made a version with the eyes separated to be able to print them in other colors, I tried to do it in Blender but I am not very expert and it became complicated. I do not have problems with the legs like the other buyers.
kazwatts
kazwatts

Have printed off two ants now, using different filaments and adding more density but two of the legs will just not print properly. First ant just crumbled on one of the back legs, second ant over extruded so it is just a mess. any suggestions?
xaunagro
xaunagro

The Ant's legs break super easy. About 75% of the time they break during printing or have extremely weak spots on the front left leg. I have printed this on 2 different 3D printers and I use Cura. I have also used different brands of PLA including Hatchbox. Do you have any suggestions on how to strengthen it? All of the other prints I have purchased from this designer have been perfect.
prebenhovedskou
prebenhovedskou

So now I've payed for this file twice!!

But how do I get the shit..??
aprendolol
aprendolol

Puedo usar el diseño para fabricarlos en PLA y venderlos? o no lo permites?
flowergurl4eva
flowergurl4eva

Hi,
What kind of PLA is used for these?
Thanks,
Vanessa
jshop
jshop

I am so impressed with this design! Pillow Fort Studios - You did an amazing job! Thank you. I have just sent you a PayPal donation on top of my purchase of the ant. My wife is a therapist and she talks about ANTs (Automatic Negative Thoughts) and "Lizard Brain" with her clients constantly. This ant is just perfect. My wife loves the ant and asked me to print several to share with her clients. I was looking for a good lizard model, too. Would you please consider making a lizard model of the same kind of "fun" theme? I would appreciate it so much. Thank you, again.
alexandre039
alexandre039

thank you to you. fine works. I print the ant children and the big child loves
DroneBoner
DroneBoner

$20 for a spider ❤️
chimir
chimir

you must add a spider
marcd90
marcd90

Printed this last night but all the legs fell off isit because I didnt use a brim ?

  • 1 j’aime
chrisoshea
chrisoshea

i was struggling for good things to print until i came across the hand and loved it, now this awesome ant ,please do a tarantula that would be awesome

Page traduite par traduction automatique. Voir la version originale.

Vous souhaitez soutenir Cults ?

Vous aimez Cults et vous avez envie de nous aider à continuer l’aventure en toute indépendance ? Sachez que nous sommes une petite équipe de 4 personnes et qu’il est donc très simple de nous soutenir pour maintenir l’activité et créer les futurs développements. Voici 3 solutions accessibles à tous :

  • PUBLICITÉ : Désactivez votre bloqueur de publicité.
  • DON : Faire un don via Ko-Fi 💜.
  • BOUCHE À OREILLE : Invitez vos amis à venir découvrir le site et les magnifiques fichiers 3D partagés par la communauté !

Partager et télécharger sur Cults3D c’est garantir que les designs restent bien entre les mains de la communauté des makers ! Et non celles des géants de l’impression 3D ou du software qui possèdent les plateformes concurrentes et qui exploitent les designs pour leurs propres intérêts commerciaux.

Cults3D est un site indépendant et autofinancé qui n’a de compte à rendre à aucun investisseur ou aucune marque. La quasi totalité des revenus du site sont reversés aux makers de la plateforme. Les contenus publiés sur le site servent uniquement les intérêts de leurs auteurs et pas ceux des marques d’imprimantes 3D qui souhaitent aussi contrôler le marché de la modélisation 3D.