Jurassic print wrangl3r - 向恐龙公园汽车致敬的复制品 - 全 3d 打印遥控套件

Hello! It comes with the Jurassic Print logo only 😄 I'm not allowed to sell the original one! But I have it available and I can share it for free. Please send me an email to [email protected]

Hello and thank you so much for the great and for the motivation 😄 Stay tuned for more contents!!

Hello, yes absolutely!
The small 3530 with the ESC on the part list will be completely fine for normal speeds.

Thanks for asking!
Enjoy the build 😄
Andrea

Hello and thank you for the 😄

I confirm that it is not normal. Do you already tried to change the rate of the throttle on the radio?

Waiting for your anwer!
Andrea

I've tried a lot of things so far, but I haven't managed to get the motor to run slower. I've attempted trimming and calibrating both the transmitter and the ESC – unfortunately, the manual isn’t helpful here. I even generated a precise PWM signal for the ESC using an Arduino, but the motor only starts moving after a certain threshold, and then it’s far too fast for a crawler. I can’t shake the feeling that the brushless, sensorless motor simply can't operate at lower speeds.

I'd prefer to switch to a brushed 540 80T motor. Could I please get the STEPs for that?

Hello!
Sure, I have the STL file of the 540 ready for you, please send me an email to [email protected]

Great, I sent the mail. Thank you!

I tried it today. It is much better now with the 540 80T Motor! Thank you! Pictures comming soon.

This is awesome! Thanks for the update, I'm glad you are happy with it 😄

Hello!
Absolutely yes, check the printable list, the locked differential parts are available on the Printable#77 😄
Here is the Printing matrix: https://docs.google.com/spreadsheets/d/1PxgICdaFddOlr-kgDg-_krzX_QkgRucEbGtFvmjS2UY/edit?gid=1658622867#gid=1658622867

Sorry, please ignore this - I have just bought the model. Could you tell me which Axle stands you printed in the pics please ?

Hello 😄 Don't worry, I'm glad you found the solution, yes I can share with you the stands, send me a message to [email protected]

Hello and thanks for the message 😄
Yes of course, a community member customized the tires to print it by TPU, here is the link: https://cults3d.emulatorsite.com/en/3d-model/game/3d-printable-tyres-for-casadio-community-s-wrangler-jp-malbeex3dgarage

Hello and thank you very much for the kind comment! Yes I will do it, not on the short term. But definitely a model I would like to design one day. Stay tuned 😄

And a whip movie accurate antenna for the right rear quarter pannel

Absolutely, I'm going to release a standard version without the Jurassic Print livery, then I will start immediately with a hard top and a soft top update 😄 you will receive all the notificatiuons by email!

Thank you so much 😄 I'm super sorry for the hinges failure. Try printing them VERY SLOW. I mean 50mm/s
Got my Bambu A1 yesterday, I will do the same test, please let me know if you solve by slowing it down!

I set the speed on "silent" so it was 50% slower than normal and used black, creality ABS. They worked great after that! Just waiting on my AliExpress order with bearings and motor! Would be very interested in this model without the logos and numbers (just a regular jeep) for my daughter to use with her barbie dolls, would happily pay extra! Also curious if you would consider making the Toyota SR5 truck from Back to the Future? Thanks again, and absolutely amazing work!!!

awesome! The model without logos is coming, I just need a few days of work, then the hard top and the soft will be available too 😄 I confirm the Toyota SR5 is on my list!! Thank you so much again!

Absolutely! Once you the files send me an email to [email protected] to receive the files in advance 😄

Sorry for that my friend! I put the part list right on the first few pages of the build guide just to be sure it is noticed 😄 Thank you so much for noticing the missing link, just updated with a note!

The $275 is worth it. This build is so detailed and fun.

Thank you so much!

Thank you so much for the suggestion, don't worry. Tree s are not mandatory, feel free to use standard since this model does not require too much, even for the body parts 😄

Hello and thank you so much for your 😄 I'm not able to design nice looking characters at the moment. Sorry for that!

Well, this Jeep is awesome and the build manual is so nice. Thanks for all the hard work, well worth the price.

Thank you so much 😄

According to the 3D model at least 1400kg including some failures, but it is going to depends from the printer settings! 😄 Let me know if you start with such an incredible upscale!

Hello! Thank you so much and my congratulation for your name and avatar picture :D At the moment only the 18 one, but maybe in the future I can release a customizing service to put the number you want 😄 Hope this is ok for you!

Check also the detailed build guide here below! I want to be sure that all the people will enjoy the build process! https://docs.google.com/presentation/d/19mKX025DV4eVqjcEqHs_HcnBQBO1RobR4QVHlCYZXGw/edit#slide=id.g13c51deebe7_32_0

Thank you so much! Yes that's correct, but since I'm a huge fan of the movie, I had a lot of fun doing this replica 😄

Thank you so much for the amazing comment! It keep me motivated to continue with the projects 😄 Oh man, you are 100% right and you saved me, this is a great error and I hope that not too many s bought the wrong one. I just sent the notification to everyone! I'm super gratefull for that. Thank you!! Regarding your question, check the updated part list for the correct ESC!
Andrea

Awesome comment 😄! Thank you so much! Don0t worry, since the project is very big I created a step-by-step build guide to make the process very easy! https://docs.google.com/presentation/d/19mKX025DV4eVqjcEqHs_HcnBQBO1RobR4QVHlCYZXGw/edit#slide=id.g13c51deebe7_32_0

Hi and thank you for the comment! You are completely right! I forget to add the pictures of the wiring on the manual! I will do it in a few days, you find it on the manual before the "body assembly" chapter! Thank you so much 😄

Yes I have a lot of Toyota truck on my list 😄 Stay tuned and thank you for your !! It helps me a lot to proceed!

I know, but unfortunately I did not find the proper filament to match the sand beige!

Hello! The scale is 1/6.9 very strange I know! See the build guide here for more information: https://docs.google.com/presentation/d/19mKX025DV4eVqjcEqHs_HcnBQBO1RobR4QVHlCYZXGw/edit#slide=id.g13c51deebe7_32_0

thank you so much!

thank you so much! The battery is going to be placed below the rear trunk floor, I created a sliding cover and the battery seats inside the fake fuel tank! See at page 250 of the build guide here: https://docs.google.com/presentation/d/19mKX025DV4eVqjcEqHs_HcnBQBO1RobR4QVHlCYZXGw/edit#slide=id.g13c51deebe7_32_0

Hello! That battery is too big to be placed inside the battey box, but it is for sure ok for the application! Check page 5 of the build guide for the recommended part list or page 250 to check the battery box 😄 In case you prefer the 6000mAh of your link, you can use it, I will update also the model with an hard top, so that you can install the battery on the rear seats! Build guide: https://docs.google.com/presentation/d/19mKX025DV4eVqjcEqHs_HcnBQBO1RobR4QVHlCYZXGw/edit

Hello 😄 According to the build guide, page 5, it depens from the part. But most likely 3.5kg of filament for the whole build are necessary! https://docs.google.com/presentation/d/19mKX025DV4eVqjcEqHs_HcnBQBO1RobR4QVHlCYZXGw/edit

thank you so much!!

thank you so much to you for the comment 😄 I'm glad you like it!

thank you so much!!