Модульная система хранения - Хобби и мастерская - Хранение мелких деталей

FULL .step collection with all elements included!

This collection will be updated with new models from time to time!

Modular shelving system - Hobby & Workshop - Small parts and tools sorting and storage!
With stop-lip to prevent drawer falling out, endless number of combinations.

Main Features:
Modular - combine elements in any way for any type of storage purpose.
Stop-lip prevents drawers from falling out - lift to pull the drawer out
Removable nameplates for quick and easy exchange of labels
Various sizes and compartment number/type
Removable separators
Designed for 3d print - excellent printability
Peg system for connecting the elements

IMPORTANT:

All elements have tight tolerances by design and on purpose! I needed something that would be sturdy and without any rattling or elements/drawers falling out. My printers are finely tuned and produce dimensionally very accurate parts so i do not have any issues with parts fitting as they should, tight but very smooth. Please keep this in mind if your printer is not well tuned or at least make sure it's not over-extruding by a lot. NO PARTS need sanding or any post processing to fit nicely, at all! With elements tilted, drawers should slide out smoothly without jamming or binding on any side. DO NOT re-orient parts on slicer import, all STL's already have correct print orientation! All parts have 0.4mm chamfer applied on the surfaces in with print bed, to offset for elephants foot, however, if you squish your first layer too much, there may be a “rim” around the first layer that would prevent the drawers from smoothly sliding into the elements.
Print:
Can be printed in any material, my favorite for this kind of things is PLA and PETG.

3 perimeters, 5 solid layers for top/bottom, 0.4mm nozzle

All my models print without any s!

Filaments used in photos:

3DJake - ecoPLA Dunkelgrau
Fillamentum - PLA Extrafill Melon Yellow
Extrudr - PETG neon orange

Files:
STL's have a correct orientation - just import and print
STL's are named “Modular_001…” where 001 marks the sortainer type/group

Лучше всего печатать на PLA, 4 периметра, 5 слоев сверху/снизу, 20+ % заполнения. Принтер должен быть хорошо настроен для экструзионного мультиплеера, чтобы все праты хорошо и гладко прилегали.