Anycubic KOBRA S1 RISER

This model is a riser for the Anycubic Kobra S1.

The riser features (some of the add-on features are available as free to models on Makeronline):

• Two large storage drawers with customizable compartments.
• Side mounted external spool and mount;
• Corner filament guide. It helps prevents jams and tangles by routing the filament around corner and connects to the rear Bowden tube;
• Integrated build plate holder that can hold multiple build plates;
• Tool tray add on
• Lid riser;
• LED mounting bars and LED rear housing;
• Customizable sign (a blank sign STL is included)
• Much more.

Specifications:

The riser adds 15 cm (6 inches) of height to the Kobra S1 and Ace pro combo.

Total height with Ace pro opened is approximately 107 cm (42 inches).
The Kobra S1 riser requires about 2kg of filament for the base unit including drawers and inlays.

Options

The part "Front left (no sign)" is available as an STL (no with the print profile). Use this part if you do not wish to use the sign.

Instructions

All parts are snap fit and require no external hardware. Glue is optional.

See the instruction gif in the model's description photos. I also ed a zip file with all the instruction photos.

NOTE: If you want to use the WLED controller (see description and link below) then you will need to print the parts as modified by Hasan for the WLED controller (see the zip file "Modifications for WLED control unit)

Add-ons and external model links - available for free on Makeronline:

• RECOMMENDED - Side mounted external spool holder with interchangeable spindles: https://www.makeronline.com/en/model/Interchangeable%20spool%20holder%20for%20Kobra%20S1%20riser/185868.html

• Side mounted external spool holder).
  
  Link: https://www.makeronline.com/en/model/Side%20Spool%20holder%20for%20Kobra%20S1%20riser/157314.html
  https://www.makeronline.com/en/model/EXTERNAL%20SPOOL%20HOLDER%20FOR%20KOBRA%20S1%20RISER/162262.html

• Corner filament guide
  
  Link: https://www.makeronline.com/en/model/Filament%20guide%20for%20Kobra%20S1%20riser/157315.html

• Lid holder:
  Link:https://www.makeronline.com/en/model/Lid%20holder%20for%20Kobra%20S1%20riser/157317.html

• LED housing (see LED Controller as another option):
  Link:https://www.makeronline.com/en/model/LED%20housing%20for%20Kobra%20S1%20riser/157316.html

LED Controller (WLED Control Unit - A very cool LED Controller - be sure to the parts modified by Hasan - "Modifications for WLED control unit" and print those)
Link: https://makeronline.com/en/model/WLED%20%2F%20LED%20control%20unit%20for%20the%20Kobra%20S1%20riser%20with%20control%20buttons/178457.html?fbclid=IwY2xjawJ9x6JleHRuA2FlbQIxMABicmlkETF0WEljY1ZVb0tPbVI3ZlFYAR6UbAhVWoBezUYxIvKE5YykokC9jg-710O_TWGUzijxdRii_oVdU7JRfnsiYw_aem_0Q90_akXJ3uUdyO6iYCGew

• Tool tray (two options to choose):
  Link: https://www.makeronline.com/en/model/Tool%20tray%20for%20Kobra%20S1%20riser/157318.html
  https://www.makeronline.com/en/model/Tool%20tray%20for%20Kobra%20S1%20DUAL%20ACE%20PRO%20RISER/162256.html

• Drawer compartments
  Link: https://www.makeronline.com/en/model/Drawer%20compartments%20for%20Kobra%20S1%20riser/157319.html

Hot end tray (design by aeromedic7 on MO) https://www.makeronline.com/en/model/Noozle%20and%20hot%20end%20tray%20for%20Kobra%20S1%20Riser%20(Kobra%20S!%20Riser%20by%20Darren%203D%20Prints)/172411.html

Nozzle and hot end compartment (by Brody Richardson): https://www.makeronline.com/en/model/Gridfinity%20Nozzle%20and%20hotend%20compartment%20for%20S1%20Riser/180020.html?fbclid=IwY2xjawKF1ElleHRuA2FlbQIxMABicmlkETFMNmdBd1Bia1NOM2prZlZsAR7auQOcwW2oU3aHYwKsY49Vxl2yY-848MtM7ZOxXPqHeE6gdu08sQR4-sdSfA_aem_PIkve61tzVdUrS1dSXmNdw

Side inserts with lid holder:
https://www.makeronline.com/en/model/KOBRA%20S1%20RISER%20Lid%20holder%20side%20inserts/184870.html

NEW: Modular tool tray : https://www.makeronline.com/en/model/MODULAR%20TOOL%20TRAY%20FOR%20KOBRA%20S1%20RISER/175361.html

3d printing

A print profile is included for the S1 (name: Anycubic - Riser main components v2.3mf). I highly recommend you use the print profile as all the is painted and the parts are correctly positioned.

I HAVE PAINTED ON ALL PARTS ON THE INCLUDED PRINT PROFILE. SLICE IT USING TREE MANUAL.

I have printed each part and tested everything. Tolerances are tight where they have to be. If you are having issues with your printer, your filament or adhesion I suggest you ask for help on Facebook or a forum as I cannot help you there.