Набор для модернизации контейнеров для карточек

This is an upgrade kit for the Really Annoying Card Container, but it can also be used as a standalone gift box itself! The Really Annoying Box has 3 layers and 134 bolts, while this upgrade kits adds layers 4 and 5 along with 162 additional bolts!

If you would like to purchase the files for the Really Annoying Gift Box itself and make it the full 296 bolts, you can find it here: https://cults3d.emulatorsite.com/en/3d-model/art/really-annoying-card-container

**As of 11/9/2024, there is another Upgrade Kit available to add another 370 bolts for a total of 666 bolts! You can find those files here:
https://cults3d.emulatorsite.com/en/3d-model/game/really-annoying-card-container-upgrade-kit-2

This box fits the original Really Annoying Box inside. If you want to use the box as a standalone gift box, the inner dimensions are:
L: 5.85" (149 mm)
W: 4.25" (108 mm)
H: 2" (52 mm)

**These designs are ed with a non-commercial license. Purchasing this file does not grant you the right to sell commercially.

If you would like to consider gaining access to ALL of my models and the rights to print and sell them, you can check out my Patreon at
https://www.patreon.com/thinair3D

**These are just the settings I used to test the model, feel free to use whatever settings work best for you.

FDM or Resin: FDM
Scaling: Can be scaled up, bolts likely won't work well if scaled down.
s: None
Infill/Perimeters: 15% infill + 2 perimeters, 3 perimeters for bolts and screwdriver.
Nozzle Size: 0.4
Layer Height: 0.2

No s are needed for this model, just print the pieces in the orientation that they import and assemble after printing. You will need to print all of the pieces, plus 162 bolts.

I have included a "thread test" file so you can make sure that the bolts are going to fit into your box before you print all of them! Make sure to print the thread test in the orientation that the file imports in. The female part will be printing vertically, so it needs to be tested in that orientation.

File List (18):

- box_4a (STL)
- box_4b (STL)
- box_5a (STL)
- box_5b (STL)
- box_5_lid(need 2) (STL)
- really_annoying_ribbon (STL)
- flat head bolt (STL)
- flat head screwdriver (STL)
- phillips head bolt (STL)
- phillips head screwdriver (STL)
- 5.5 mm bolt (STL)
- 5.5 mm driver (STL)
- 6 mm bolt (STL)
- 6 mm driver (STL)
- special bolt (STL)
- special screwdriver (STL)
- all_in_one_tool (STL)
- annoying_box_thread_test (STL)