Jester - LB32 Игрушечный дробовик с выбросом гильз - Band Powered (только файлы)

Video about this blaster: https://youtu.be/0saqcy4iZhQ

These are STL files purchase for a toy foam dart blaster. Make sure you comply with your local laws: if your state law requires - print it (especially barrel) in bright colors (orange).

This blaster uses newly designed LB32 pre-primed cartridges. For power cartridges uses resistance (exercise) bands.

This double-barrel foam dart blaster is designed with a cyberpunk short-barrel shotgun aesthetic and offers an exciting shell-ejecting experience. It fires mega-sized 95x20mm foam darts using pre-primed cartridges powered by exercise bands, making it simple yet effective. The blaster itself requires minimal hardware, using only office rubber bands for operation.

When the breach is opened, the shells automatically eject for a realistic reload action. Two triggers allow each barrel to be fired separately or both at the same time. Built-in firing indicators show which barrel is still live.

This blaster is fully 3D-printable with PLA and requires no glue for assembly. It is easy to put together, and detailed instructions are provided. Perfect for hobbyists, cosplay, or foam-blasting fun, this design combines simplicity, performance, and an immersive experience.

--Printer Requirements: 200x200x200mm or bigger
--I advice AGAINST using filament with weak adhesion (Matte PLA, Silk, etc). Regular quality PLA will work.
--FDM (Resin is too weak)

--Printing Instructions in .jpeg format are inside ZIP files
--Links for assembly instruction videos are in “Instructions.pdf”

Non 3d printed materials needed:
--Office rubber bands
--Exercise (resistance bands) around 1mm thickness
--Plastic friendly oil
--Big (95x20mm) sized foam darts

Tools recommended:
--Pliers
--Scissors
--5mm Allen Key

Licence once purchases:
--Unlimited personal use
--Allowed to make copies for friends, family without financial gain
--Allowed to make 1 commercial sale of the printed product for each purchase of the digital file
--NOT allowed to make changes to the digital product
--NOT allowed to redistribute this digital product
--If you wish to make MODS for the product (E.g. attachments) reach out to me [email protected]
--If you wish to use LB32 cartridge for your own design me [email protected] for and conditions

Safety:
--For ages +16
--Not suitable for kids
--Always wear safety glasses when operating this foam blaster

-Printer Requirements: 200x200x200mm or bigger
--I advice AGAINST using filament with weak adhesion (Matte PLA, Silk, etc). Regular quality PLA will work.
--FDM (Resin is too weak)