Мебель для швейных машин, #ДАГОКУЛЬТУРЫ

Furniture for sewing machine.
there is never room on my tables at home to do sewing, so I imagined a piece of furniture where only the sewing machine could hold on.
Having access to the most common sewing utensils.
- A scissor sheath
- as many coils as necessary
- small boxes for machine utensils (cans, needles, thread feed ...) or for small objects such as buttons.
To finalize the piece of furniture it is enough to buy in DIY store (in addition to the 3D printings):
- a board of 600x192x19mm
- 2 wooden trunnions of Ø20mm and 770 of long
- 2 wooden trunnions of Ø20mm and 850 of long
- 1 wooden journal of Ø12mm and 520 long
- 4 screws of 4x2m

#DAGOCULTS

19 different coins (30 to be printed, plus coil clamps according to the number of coils to be clamped):
- 1x coisement-01 (100x91x52)
- 1x coisement-02 (100x91x18)
- 2x foot-01
- 1x scissor holder-02 (52x39x21)
- 2x -tablet (one right) (75x75x65)
- 2x foot-02 (22x27x60)
- 1x -box 01 (22x27x60)
- 1x -box 02 (22x27x40)
- 4x box 02 (41x57x39)
- 4x box 02 (41x57x39)
- 1x -rod02 (29x50x20)
- 1x -rod03 (103x9x20)
- 1x -rod01 (64x28x95)
- 1x coil clamp-01 for fixing the rod
for fixing 1 coil:
- 1x coil clamp 01 (16x18x20)
- 1x coil clamp 02 (14x30x23)