Flexi Leaf Dragon Mark-Ⅱ Set (Print-in-place)

--2024/05/22--
Extra service "Mini Leaf Dragon" released!!

[Update]
---2024/02/07---
A model with a straight type is now available.
---2024/03/18---
Fixed an omission of paint in the multicolor file for wide type.
---2024/05/07---
The quality of the 3mf files has been improved. Problem with blurred boundaries between the abdomen and torso has also been corrected.
*There are no stl changes in this update.

---

This is an upgraded version of the Flexi Leaf Dragon I published on Thingiverse.
https://www.thingiverse.com/thing:6446798
The following details have been added compared to the free version.
・Scales added to the head and limbs
・Newly sculpted large leaf scales on the back
・Stripes have been added to the leaves on the tail and mane

This model includes the following digital content
01: STL - Leaf Dragon(Long Size)
02: STL - Leaf Dragon(Medium Size)
03: 3mf (Bambu)- Leaf Dragon(Long Size)
04: 3mf (Bambu)- Leaf Dragon(Medium Size)
05: STL - Dragon Stand
06: 3mf (Prusa)- Leaf Dragon(Long Size)
07: 3mf (Prusa)- Leaf Dragon(Medium Size)

03 and 04 are 3mf files for multi-color that are compatible with Bambu Studio, and 06 and 07 are 3mf files for Prusa Slicer. If you want to do multi-color prints, please use these files.
*After April 2024, Bambu and Prusa 3mf files will be compatible with each other, so there is no need to use them differently. (Only the set colors will be reflected unless imported into the corresponding slicer software.)
---2025/01/13---
*Creality and Anycubic printers will also be able to multi-print starting in 2024. 3mf compatibility is described below.

Creality Print:
It is compatible with both Bambu and Prusa. To use it, import the 3mf and then change the printer model back to the one you are using to enable multi-printing.
The color settings are retained in both Bambu and Prusa 3mf. There is no need to re-set the filament color.

Anycubic Slicer:
Only Prusa is compatible. To use it, import 3mf and then change the printer model back to the one you are using to enable multi-printing.
The color settings are not retained, so you will need to reconfigure the filament in ACE Pro by referring to the file for Prusa. (You can view the color settings for Prusa from Anycubic Slicer.)

There are Three types of models, square type (170mmx160mm), wide type (240mmx125mm), and straight type, which can be used according to the bed size of the 3D printer. If your 3D printer has a bed size of 250mmx250mm or larger, such as "Bambu Lab P1P", you can make up to Two dragons at once. (using wide type)
This set also includes a medium size model (ONLY SQUARE TYPE) as an extra. Please choose your favorite size and 3D print it. Print in Place with no s. No assembly required.

Only the stand on which the dragon can be displayed needs to be assembled. Please refer to the second GIF and the 7th photo when assembling the 3d printed. Stand #3 should be oriented with the numbers to the right and stand #4 should be oriented with the numbers toward the front.

Please take pictures of your Flexi and share them with us!

---

💰Commercial Use💰
This model is granted "CULTS CU-ND - COMMERCIAL USE - NO DERIVATIVE" and may be used commercially within the of use.
Ex) Sell 3D printed Flexi on Etsy, flea markets, etc.
For more information, please see the and conditions below.
https://cults3d.emulatorsite.com/en/licenses#cults_cu_nd
---2025/02/26---
Authorized Seller badges are now available in three designs: Calico Cat, Mini Hammerhead, and Mini Leaf Dragon. Please choose your favorite badge. Please show badge or indicate credit when you use the service.
---2025/04/02---
The of Use have been established in accordance with the classification of commercial model licenses. This model falls under the “AC-Model (Anyone Commercial use model)” in the of Use. For details, please refer to the following of Use.
https://drive.google.com/file/d/1TjkHUrN8qe8yG8MmRCwXiNFpBBpMSvAV/view?usp=sharing
⚠Attention⚠
Only this model can be used for commercial purposes; the free version of the model cannot be used for commercial purposes.
(Because free version is already licensed under the "CC BY-NC-ND 4.0" or "CC BY-NC-SA 4.0" non-commercial use license. Also, selling a free version that cannot be used for commercial purposes may cause customers to misunderstand that you are selling it without permission.)

---

💷💷
If you would like to chip in or us, we would be happy to purchase a paid model for sale on Cults.
💷Cults↓
https://cults3d.emulatorsite.com/en/s/3dflexseeds/creations

---

⚠Warning⚠
Be careful in environments with young children and pets!
This model contains small parts. If not properly stored in an environment with young children or pets, it may lead to accidents such as accidental ingestion or injury. If infants or pets are present, please take appropriate measures depending on the situation, such as refraining from 3D printing or storing in an appropriate place.

Do not apply strong force!
Applying strong force to a 3D printed model or throwing it may damage the model and lead to accidents such as injuries. In addition, debris from damage to the model may be accidentally ingested by infants or pets. If the model is damaged, dispose of it immediately.

Store them in an appropriate place.
After 3D printing, store the model in an appropriate place out of reach of young children and pets. Proper adherence to the precautions will ensure safe use of the model.

---

📓Notation based on the Specified Commercial Transaction Act📓
I have published a detailed document on Google Drive, see document below.
https://drive.google.com/file/d/1rOKYstIj3QgHjGHDQpxW496CjzwUfTXK/view?usp=sharing

🖨 Настройка печати🧵

Заполнение: 15-20%

Материал материала: PLA

[Высота слоя]

Высота слоя: 0,2 мм

Начальная высота слоя: 0,2 мм

[Шов]

Положение шва: Выровнено

[Стены]

Петли для стен: 3

[Начальная скорость укладки]

Начальный слой: 30 мм/с

[Другая скорость укладки]

Внешняя стена: 30 мм/с

Скорость нависания: 0, 0, 10, 10, 10 мм/с [10%, 25%, 50%, 75%, 100%]

Мост: 30 мм/с

[Ускорение]

Внешняя стена: 2000 мм/с^2

[Поддержка]

Включить поддержку: нет

[Raft]

Слои плота: 0 слоев (нет)

[Bed Adhension]

Тип ободка: Без ободка

[Prime Tower]

Внутренние ребра: нет

Ширина: 15 мм

Ширина ободка: 0 мм (нет)

Зазор в заполнении: 100%

Ребристая стенка: нет