26 commentaires

Hi, you are right sorry, I was working on Two models at the same time but I have now added the correct tiles. I apologise for that. If you re- the model you should be able to get the correct stl files. If not please come back to me.

Hi, looks like it has went through only once at my end. What to do is reach out to Cults as they may be holding your second payment. Let me know how you get on. Thank you for the let me know how you get on with the building.

Sure no problem, I'll do that. Had to hack away at the connection between the spire base and the dome, but my printer isn't amazing and I manually ed the parts, so probably on me there! I'm only using the top sections as part of a heldrake base, so haven't seen the whole building, but the part I've printed looks really good.

Hi, here are the sizes:

COMPONENT SIZES ARE AS FOLLOWS:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Capitol BASE 1: 83.4 x 106.57 x 19.38 mm
Capitol BASE 2: 109.9 x 106.57 x 19.38 mm
Capitol BASE 3: 106.57 x 83.4 x 19.38 mm
Capitol BASE 4: 109.9 x 106.57 x 19.38 mm
Capitol BUILDING TOP (FLAT TOP): 100.35 x 99.93 x 38.14 mm
Capitol DOME: 83.37 x 83.57 x 34.46 mm
Capitol MAIN WALL TYPE 1: 128.01 x 30.54 x 68.2 mm
Capitol MAIN WALL TYPE 2: 93.41 x 15.74 x 68.2 mm
Capitol ROOF (FLAT - FOR ROUND TOP): 127.81 x 127.81 x 6.4 mm
Capitol ROOF (FOR SQUARE TOP): 127.81 x 127.81 x 6.4 mm
Capitol ROUND BUILDING TOP: x 99.74 x 99.74 x 37.1 mm
Capitol SPIRE V2: x 18.72 x 19.85 x 56.01 mm
Capitol SQUARE BUILDING TOP: 99.93 x 100.35 x 38.14 mm
Capitol STAIRS: 31.18 x 86.46 x 16.24 mm
Capitol TOWER: 38.91 x 39.81 x 41.25 mm

Tks !

I did have some but they were taken down a while ago sorry.

Hi, I have now made a ruined version of the manufactorum building, if you purchased the original then you should receive the damaged version as an update. I have started the process of making ruined versions of my buildings.

Sure thing........... https://cults3d.emulatorsite.com/en/3d-model/game/round-tower-2

You can print the mid-sections only without the door.

Hi Dan, they are still in my plans to do, I just haven't got around to it yet. I have been slowly collecting the old pieces and still have a few to go. I will endeavour to get them done soon and I will let you know when.

Hi, all of my models match the current Imperialis buildings from GW, the manufactorium building also matches the old model for Adeptus Titanicus which I don’t believe is available now. I will take a photo of the two side by side and send to you if you can forward your email address please. What I will say is that the official manufactorum building is way too small for the scale so this could be scaled up but I tried to make my buildings the same aspect ratio as the official models.

Ah right. That would explain it :). Yes, I go back to Space Marine (and waaaay beyond) but stopped the tiny stuff at EA, so never really did AT. I wondered if some of the old GW 'What is this consistent scale of which you speak?' malarky was going on. I'll just re-scale accordingly. Am about to slap some stuff on the plate: wish me luck!

No worries, good luck and I would love to see photos of what you come up with ;0)

I'm printing something tomorrow, Stuart. God help me. I'll let you know how it goes! Are the models set up for FDM if you slap them on the plate? I know I've asked this before but just checking as BambuStudio kept trying to get me to stuff, but it does seem overly twitchy. I can't if you've set the models up for FDM or uned Resin. But then I am very old.

Hi, I personally haven't run them off on a FDM printer but I know of other s that have and they seem to be quite successful. The models aren't exactly set up for FDM so you will probably have loads of s - I was thinking on trying some of the models with FDM and wondered if it was best to use Tree s instead of the usual s which tends to fill in every vertical space which can be a nightmare to remove. I think Cura has a tree feature but you could give it a go without s as you might get lucky.

Cheers, Stuart. That's a good idea – I'll have a look. It's certainly a model-by-model basis. Some of them don't flag up any issues but some obviously do (and a few should but don't seem to – not sure the algorithm for BambuLabs is as refined as it should be). Are you likely to the files for resin at any point? I'm not bad at it but it's such a time-sucking faff, isn't it? Then a bit of Russian Roulette on the plate :). I think solid model options are great in addition to the others as then I could either hollow for resin or do a curve-topped scooped insides hollowing for FDM (so the printhead doesn't have to zoom across long flat inner-surfaces and hope gravity doesn't win!). I'll have to do a few of them in FDM anyway as they're waaaay too big for my GKTwo. Keep up the good work: love the models!

Hi, yes not a problem I will add a one-piece model and let you know when it’s ready , thank you

Hi, a 'one-piece' model has been added.

Hi Stuart. Thanks for the one-piece: very handy. However I think the solid version so beloved of resin-monkeys like me has vanished? I've still got it from the previous but it would be great to have it back for newbies as having a solid version of things allows us to hollow at various scales, clearly? Thanks.

Thankyou but one last request the middle x/s are not needed and add alot of time can you just make one without them please.

Hi, I have added a 100% Solid Infill model and a Complete Assembly model without the Cross-Bar s. Let me know if this is ok for you ;0)

perfect thankyou

Sure can, leave it with me and I’ll make a one piece section for you :0)

Hi, I have added the base as one complete assembly, you should get the update message via email from cults also. Hope everything is okay but if you have any issues please let me know.

Thank you :D

There's quite a bit of detail on these minis so I believe that they would upscale very well. The walls on the epic tanks are a certain thickness to cope with the small scale but if you scale these up then the walls become thicker and you may use more print medium than necessary but that would depend on the scale you intend to go up to? At present these epic models have solid infills between the wheels so this solid infill would also be present on any upscaled model. What scale are you trying to achieve?

a 28mm scale, somewhat "heroic" attempt at it.

I can get decent prints in resin up to about 20mm scale. After that things get a bit resin-heavy (and physically heavy) and you might be better off getting models that are specifically designed for 28-32mm. I do 15-18mm quite a lot, though, and the models are great for that. Hope this helps.

That’s fine

Fantastic news, thank you very much. I wonder if some of your buildings could be split cleverly as well, to print a complete side and then glue them together

I am already planning that as I feel some of the walls are too thick so will look at that over the next few weeks :0)

Hi Chappard, thank you for your kind message, I am waiting on some physical models arriving in the post from eBay and once I receive them I will make up the other sets. I also plan to do some floor sections so please bear with me and I will have those soon, but thanks for the s. I’ll come back to you with a progress on these ;o)

Hi Chappard, I have added some basic floor designs and added some additional photos showing examples of these. I haven't yet started work on the other ruins but plan to do soon. I always try to mix things up a little and offer aspects which was not available at the time when these were originally available off the shelf so I am open to any suggestions if you have any.

Hi, Thanks for the s, very much appreciated. I have added a solid infill for the MANUFACTORIUM BUILDING, i'll look back to see which other ones need the 100% solid infill.
Cheers
Stuart

Brilliant. Cheers, Stuart. I've given you (and the other usual suspects) a big-up on a YouTube channel looking at Legions Imperialis scenery: Miniature Realms (I'm posting as TheHunch8ack). Thanks. Kipples.