62 commentaires

Yes, indeed - this is a seller I don't know.
In order to sell my models, it is necessary to purchase a commercial license. Then it will be a fair deal.
Thank you for your vigilance.

Unfortunately, I don't understand electronic components. In my opinion, I would use powerful SMD LEDs. Each LED can be glued inside the holes and covered with a cap.
Lead the wire out to the side and hide it under the wig.
ATTENTION! LEDs heat up during operation! Be careful when making.
If you have any ideas on how to improve this design, then write to me by email - I accept any drawings (even MS Paint and hand-drawn)

Привет! Готово =)
Если ты приобрёл эту модель, тогда просто пере-скачай архив (не нужно платить дважды!).
Думаю это то, что тебе нужно. Если у тебя остались вопросы - не стесняйся и пиши мне.
Надеюсь тебе понравится =)

I'm currently working on a series of flexi toys and finishing old orders.
Subscribe so you don't miss the most interesting stuff =)

I meant like, articulated toys. Ones that can pose and keep that pose.

I'm working on it.
Do you have any ideas? Or would you like to make a custom order?

I'd probably want to make a custom order for a Mettaton EX, but that would have to depend on your prices

Unfortunately, I am currently working on other projects. Stay tuned for updates.

Well, do you mind sharing your custom order prices?

Please me by email.

I'll try, but I use gmail, so I don't know if it'll arrive in time or at all.

I sent the email, but I'm not sure if you received it.

Хорошо. Спасибо, что написал =)

What gloves exactly are you talking about?

Hello!
To fix the jaw, insert the jaw axes into the holes of the base and fix them with screws, ties or elastic tape.
The glasses after printing should fit perfectly to the contour. They need to be fixed with glue or make several clamps with a soldering iron.
Did you use files from one archive or from different ones? Files from the UPD4 archive are not compatible with other archives and vice versa.
To make sure all the parts fit together, use files from one archive.

Can you write me the details of your problem?

ok so i did print it from the same file but the glasses are to small for it and the jaw dos just not stay in

i would send you a pic

Send me a photo of the mask by email

Привет! ^_^
Напишите мне ВК

Yes, of course.
Give me some time...

The update is ready!
Mask with ear caps and small fixes.
Look for the UPD1 archive.

I can see the description was updated but I don't see the new files

UPD1 is back in its place. Sorry for the inconvenience.

Thank you!

Hi! Sure!
me on VK.

https://vk.com/vk_whitefox

I'll just find you now, please be so kind as to wait a couple of minutes

I wrote to you on VK under the nickname wertyoz

This is so nice =)
Thank you so much =)
You are amazing!
Is there something I can do for you?

Nah, just really happy with the prints I got so far, wanted to express that

These shoes are wearable. But! They are for cosplay. Walking around in them all day would be problematic. Also, I kept as much space inside as possible. So you will probably need foam or elastic bands to fix them (depending on how you are going to wear them - barefoot or with your boot inside).
There are several versions - full, cut and hollow (for roller skates).
Choose the one that suits you. To match the sizes, use the measurement tools in your slicer.
If you have any problems, do not hesitate to write to me, I will definitely help.

In addition, I accept individual orders. For example, you can change the shape of the model so that it fits your foot size. Or change the model as you want.

At the moment there is a solid version and a sliced ​​version (simple vertical slices for printing on small printers).
Unfortunately, I do not deal with airsoft guns. I only make safe cosplay items. They are not intended for shooting in any form.

Thank you for your reply. So is it not possible to separate the front modifications so they can be printed separately from the main gun?

Thanks again

I updated the design.
Look for the archive "MuzzleSeparately.zip"

Amazing. Thank you. I have purchased.

The headband has two holes on the side. It is supposed to be worn over the wig, and the wig over the mask. The elastic bands can be hidden under the wig. You can also attach the headband to the mask, but then the wig will be on top.

If you need to change something, you can draw it on paper by hand or in any graphic editor (for example, MS Paint or Adobe Photoshop) and send it to my email. It is indicated in the header.

Thank you so much!

Hi!
Interesting question.
Several sellers have already written to me about selling finished prints.
My goal is to create 3D models to make dreams come true. I really like the from the guys who became a little happier after my work =)
If you have your own store, you can me by email and we will discuss everything.

Hi! Thanks for your message!
Yes, I accept commissions =)
I'd be happy to do that.
Give me some time and I'll PM you when it's ready!

YAYAYA THANK YOU SO MUCH
I’m excited now thank you

It's Ready!
Look for UPD2 on the Cyn Mask page =)
Write to me if you need to correct or add something.

YESSSS I JUST BOUGHT IT YOUR AMAZING THANK YOU FOR YOUR HELP !!

Of course!
What happened? How can I help?

Naturellement!
Ce qui s'est é? Comment puis-je aider?

Of course!
What happened? How can I help?

Naturellement!
Ce qui s'est é? Comment puis-je aider?

10US (27.1 cm, 9UK, 44EU)
It all depends on the shape of your shoes.
You can see the internal dimensions in the last pictures on the preview.
Very often the final size depends on the shape of the toe of your shoe (on most sneakers it is raised).

Ok thank you. Just to clear up some confusion, I saw on another one of your responses you said the separated models were 90% scale, as it was a request from your er. Is it 90% of the UPD-2 model? What I really mean to ask is would I have to scale it up at all to fit a size 10 US?

Oh yeah. Forgive my inattention.
The original model, UPD1 and UPD2 are scaled to the dimensions I specified above.
You are right. UPD3 has a preset scale of 90%. You need to increase the scale to 110%. This way you will get the size 10US (27.1 cm, 9UK, 44EU).
I strongly recommend taking measurements and adjusting the scale in the slicer before printing. You can also cut out some section and check how your shoes fit at critical points.

Awesome, thanks for responding. Last question, since I have a smaller printer, I don’t know if I can fit the scaled up parts, even the UPD3 versions. Would it be possible to commission a version split in more than two pieces because I’m not sure I could do it myself. I just need a version where all parts fit on a 25.4cm by 25.4cm build plate. Also, if possible, could you scale it to fit 30cm inside? Sorry for all the questions, by the way, I’m just in the process of making a Shadow cosplay and your model is the center piece pretty much. If anyone asks about the shoes, I’ll be sure to direct them to you if you’d like! Thanks again!

Got it. One more thing. I said before I was a size 10 US but I was wrong, I am an 11 US.I’m pretty inexperienced with the modeling aspect of 3D printing and I think I need to split my model into smaller pieces for it to fit on my 10 inch by 10 build plate for my printer if I scale it up enough to fit a size 11. I was wondering if I could ask (and pay for, if you’d like) for a version of the Fake Heel Air Shoes that will fit a size 11 US comfortably and will also fit on a 25.4 by 25.4 cm build plate. Sorry for all the questions, I just want to be sure I don’t mess it up. Thank you so much!

Check the archive "TingleUPD.zip"
By default the size is US10. To make everything fit use the scale 110% (x1.1)
Just in case, check the dimensions in your slicer.

If this is your first print, it will be a difficult challenge. Ask someone to help you. I recommend starting with simple models and then moving on to cosplay.
Printing requirements:
About 450 meters of filament for each boot (~1.5 spools) and a total of about 50 hours of printing per boot (depending on the print speed) (for 2 boots in total ~3 spools and ~100 hours)
A lot depends on the type of . For example, "organic" type s use less material (more economical), and "grid" type s use more.
I wish you a good print! If you have any problems or questions, don't be shy and ask for help

Hi! Thanks for writing!
At the moment, Shadow's Air Shoes have a version with a "Fake Heel" - a solid shoe and a removable back (suitable for printing on large printers, such as the Anycubic Kobra Max)
And also, quite recently, I made a cut model at the request of my favorite subscriber ^_^
You will find these files in the UPD3 archive...
There are different versions of shoes, each of which has a straight and oblique cut.
In these archives, you will find Shadow shoes cut into 3 parts - the toe, heel and upper part, and also a version with a "Fake Heel".
Please note that the scale of these models is 90% (this was a request)
If you need to make a specific cut for a specific printer model, then do not hesitate and write the dimensions of the bed or the printer model, and I will do it.
Also, if you want to put Shadow's shoes on your boots, then specify them and I will select the scale

I remind you that if you have little experience in 3D printing, this may be quite difficult to print.
Cosplay models require attention to detail, especially s and assembly.
I will help you in any case, but try to find someone who can help you.
Also, you can write to me by email. There you can attach photos directly.

From the model of shadow's Air shoes

Yes, of course!
Thanks for writing. I'll get to it now...

Check your mail

Thank you! I am very pleased ^_^
Unfortunately, I do not quite understand what exactly you want. Please explain in more detail - I can make a custom order

Like the legs of sd V are different from sd N so i was gonna ask if u could/would ever make a female disassembly drone legs/chest ect

Yes, of course!
I'll get to it soon!

However, keep in mind that V has no feet.
What do you think about this?

Tx so muchh

You can send me images by email and I will do what you want

abt the feet i have been thinking about that for ahile now so thats why i was gonna ask you because I cant be able to figure it out

Good =)
I will see what I can do, and then you will write whether I guessed your dream or not. Okay? =)

Ok!