61 commentaires

Nice to meet you too , a fellow tokusatsu fan! We are working on the might brother XX gashat, will be availible soon. But Maximum mighty action X maybe a little of a longer wait. Thanks for your patience and see you next game! Soutou
EXCITE! EXCITE! takanaru…

Oh wow I would love to see pictures of your model kit, sounds awesome!! :) Sure thing, let me know how it turns out.

Hi, the current file is scaled at 1/6. I don't have a 1/24th scale figure 😕 so I am not sure. I mainly collect 1/6 scale dolls and figures. I tried to calculate, and I think you should scale the original 1/6 scale boots down to 25% of their original size to achieve 1/24 scale. In your 3D slicer or modeling software, set the scale to 25% (or enter 0.25 as the scale factor) for all dimensions. But I cannot say for sure, it will have to be tested. Hope this helps :)

Hi, really sorry but I don't work with CAD softwares, so I can't adapt the file for you. 😕

Hello there, thank you for your message. Yes I can model the scythe for you with magnet holes for €35

Hello, thank you for your message, let us know which of the two versions you're missing and your email address, we'll send it to you :)

I have the hanging version so I am missing the sitting one! [email protected] :)

Gotcha i'll send that over

Hi, yes you can pay through PayPal. I am sharing my email [email protected], let me know your email address and will send you an invoice and the file no problem.

sorry for the lae reply, thanks for your patience, please see we added 2 new pictures depictting the recommended printing orientations here https://cults3d.emulatorsite.com/en/3d-model/game/puppet-death-stranding-2-on-the-beach-hanging-sitting-bundle

Thanks! I saw your two new pictures just now. I think I'll need to do a little more research on adding s for my filament printer. Did you use a filament printer or a resin printer? Maybe this design is better printed on a resin printer?

Hi! We print this model both in filament and in resin, the you see in the pics are default tree you can turn on in cura prusa slicer or orca slicer. No need to manually add a lot of s to print successfully. Your cura+ eleemosynary Neptune should be fine printing these. Pls see official instruction about turning on tree in cura here: https://ultimaker.com/learn/tree-s-what-are-they-and-how-do-they-work/

Yayyy that worked really well to add s!!

Thank you! 😊

Glad to know it works well! You are most welcome! Have fun 3D printing!

Hi, my understanding is you want a version of the puppet that is standing? with his feet flat on the ground? I can make that version for you

Hello :) thank you for your message, you mean customize the Dante model? yes, let me know what you would like. And thank you, I am very happy you like my models

If possible, could I email you for the details about it?

yes sure, send me an email to [email protected]

Hi there, sure! let me know what part are you looking for specifically :)

I’m looking for his gauntlet, shoulder pads, the knife sheath, and his big ol’ belt buckle

I can definitely make those for you, but let me know your max budget for this project so I can get an idea of the time to make and such. kind gretings!

Hi there, my max budget for the project is about $100 USD. If that isn't enough for all the parts, I can try to pay more at a later time for the rest of the parts.

I can imagine that there could also be some external interest in those models aside from myself, It would likely be worth it to sell them on here as well.

Sounds good! I can make all the parts you requested for that price.
are you ok with paypal goods and services ?

yup! that sounds great! I'll have to wait until Friday when my job pays me first.

No problem, I will start making the pieces for you

One thing about the gauntlet is the fingers, I am not sure the dimensions cause it would have to be test printed if you want it to be functional? the fingers is a bit complicated. let me know

also is there a picture of the knife out of the sheath? I can't seem to find it, I assume you would also like to print out the knife

The gauntlets can be scaled up/down in cura, so dimensions may not matter in the end. Regarding the knife, I think keeping it in the sheath would be better since it never comes out in-game, and it would make things easier for you :)

I'll start with the belt and sheath/knife handle and arm part of the gauntlet, then we'll see about the fingers part. my email is [email protected] I can send you an invoice of half upfront first for the models, let me know.

Half upfront works for me! I'll send you an email shortly.

Hi do you have good reference photos of him?

https://www.mercari.com/us/item/m75441005800/?srsltid=AfmBOoq3s_g29UKXW21u82xue5jq9sW6yIxnCU9xhLJT37BI9MO__ZEeztc

I want to go large scale with him. 9" or so. The helmet and jet pack is whats killing me . I have the body and gun I am just stuck on the helmet jet pack combo. I have found some models online but they are not smooth like the original

If you can send some references to my email I will check and see if I can do it :) [email protected]

emailed

Hello, I don't seem to have received your message oddly enough

How about now

Did you get it?

Hello! Thank you for your message :) Yes I can definitely model the scythe for you. Since it's a commission, I will ask €30 to make it. Let me know if that's ok with you. I can split the model and add pins for easy printing too.

That’s absolutely perfect! Thank you so so much. <3

let me know your email address and we can do it through paypal goods and services :)

Thank you! It’s [email protected] :)

sent :)

Hello?

Sure, what do you need :)

Hi, thank you for your message, I can definitely model the other ewok head but I would consider it a commission model and would ask €25 which is my commission price. Let me know if that is ok with you

How does that process work exactly?

Half upfront payment through paypal, I sculpt the model then once model is approved you pay the rest

I assume you test print and test fit before everything is final?

Yeah that's right

Ok. Let’s do this. Where do I send the PayPal?

I have received no answer to my last two emails. Are you still doing business?

Hi, I'm gonna consider it but I want to know a few things. How much are you pricing the lamps? as in how much profit you are gonna make with this? and I hope you were gonna credit me for the pumpkin design

Not planning on mass producing pieces, was thinking about lamps and possibly 3d movie posters and yes you would be credited

If you assure me you will credit then ok you can go ahead and make some.

Ok thank you. I will surely credit you. Is it just the Halloween 2 pumpkin or the others as well. Just want to be sure because if just H2 then that's fine and how would you like me to credit you, with your name/link on here?

And also. I have no intentions of selling any of your actual files

It is all the pumpkins and items on my store. Yes, please credit to Ginger LvA and also add link to store if possible. I appreciate it. Thank you, yeah it is not allowed to resell the files in any way.

I certainly will do. I would never sell or share the actual file. Thank you again I greatly appreciate it

Hi, I don't currently have plans for doing full body, but I could consider it, making a posed full body figure. how much would you pay for it if I make it? what's your budget?

Hello would you like the crown as a miniature or as a human head scale? Let me know and I will the new file :)

miniature please! I'm trying to make one for a doll and just need the crown only.

Hi, I have made the crown only available, you will also get Joffrey's in the bundle :). so share a photo of your doll with the crown once you print it, I would love to see! https://cults3d.emulatorsite.com/en/3d-model/jewelry/set-miniature-tiara-crown-game-of-thrones-margaery-joffrey

Hi, I am very sorry to hear you haven't been successful at printing the crown. I've never had any buyer failing to print it. Could you tell me where does it break? and also the date you purchased the crown? thank you.