For more designs, check out my Etsy shop: https://www.etsy.com/shop/Sporre3D
I create design files for 3D printing! Most of my models are for board games, but I also create things for other products as well! I hope you enjoy my ideas - game on!
👋 Bonjour à tous ! Ce fil de discussion est public, alors restons gentils et respectueux. Pas de publicité, de spam ou de choses désagréables !
🇺🇸 Pays du membre : États-Unis
🌐 Langue préférée du membre : Anglais. Vous pouvez traduire en ligne via DeepL.
💡 Vous faites référence à un modèle en particulier ? Ajoutez le lien, le titre ou le numéro du modèle.
🖼️ Vous souhaitez publier des photos ? Utilisez un hébergeur gratuit comme ImgBB et collez les liens dans le message.
✍️ Astuces de rédaction : Utilisez le format Markdown pour structurer vos textes et les rendre plus lisible
Hello, I just printed the revised edition insert for 2 expansion of Heat. I have pictures of it that I will post on the model but I think I'm missing something. There isn't any model that fits the maps so they don't move around in the box. The base for cards is perfect but the maps aren't fit at all. Am I missing something?
Thank you!
Hello! So glad to hear that the insert works so well for your cards and pieces! I did not design any spacers for the boards so you have all the pieces I designed. I have been using my other similar design for 6 months and there has been no damage to the boards in that time. In fact, I found that adding in a spacer (especially since I design all my prints to accommodate small format printers like the A1 Mini and Prusa Mini) creates hard surfaces that can damage the edges of the boards. Of you'd like though, I can add a corner spacer for this!
Nice, thank you!
I use to store my games vertically so an spacer is needed. I'm printing an L Shape I designed in tinkercad (basic enough for me) but an spacer for boards would be an awesome addition to your insert desing!
Thank you!
Sounds good! I also store my games vertically. I will add a spacer to the model (I was also thinking an L shape!) - I hope the one you are making works well for you!
Nice! Will I be able to try your desing when it gets ed? With the same purchase I mean. I could give you mine but it's a simple L. 170mm each arm 24.5 thickness and height of 50. I can share it after coming home if needed with a picture.
Hello! I have added a spacer to this - you should be able to re- this if you'd like. If it doesn't work, then let me know and I can figure out a way to get you the file. I had a bit of fun with the design, so its a bit more complex than needed, but it should save material, as well as act more soft and springy so as to not damage the edges of the board.
Thank you very much!! Will try it out next weekend.
hI! The heat insert accepts sleeves?
Hello! All my inserts are designed to fit GameGenic brand sleeves, with a small amount of wiggle room. Looks like tends to run about the same size or smaller, so they should fit well!