hi! is there any way to get the inverted version of the shin guard? like the mold to then be able to fill it up
- 0 j’aimes
👋 Bonjour à tous ! Ce fil de discussion est public, alors restons gentils et respectueux. Pas de publicité, de spam ou de choses désagréables !
🇺🇦 Pays du membre : Ukraine
🌐 Langue préférée du membre : Anglais. Vous pouvez traduire en ligne via DeepL.
💡 Vous faites référence à un modèle en particulier ? Ajoutez le lien, le titre ou le numéro du modèle.
🖼️ Vous souhaitez publier des photos ? Utilisez un hébergeur gratuit comme ImgBB et collez les liens dans le message.
✍️ Astuces de rédaction : Utilisez le format Markdown pour structurer vos textes et les rendre plus lisible
Écrivez votre message :
48 commentaires
molds for pressing shields from heated material (plastic) are also included
- 0 j’aimes
thanks
- 0 j’aimes
Hi, yesterday i bought this file:
https://cults3d.emulatorsite.com/en/3d-model/gadget/airpods-4-case-apple-stl
Design is beautiful, but I'm having some problems with it. Bottom part is ok, it needs a lot of s and it's not really optimal for FDM, but it prints ok and it fits well on the airpods case. The top part doesn't fit at all on the airpods case, it's a bit on the smaller side and doesn't have enough surface to adhere on it. Do you have any suggestions?
- 0 j’aimes
Send me a photo of your problem by email.
- 0 j’aimes
Good afternoon friend. Would you make one of these for the c-leg and the Rheo knee from Ossur?
- 0 j’aimes
In general yes but I don't have scanned files. If you can scan the prosthesis I can do that for you.
- 0 j’aimes
Hello,
I just purchased the Monkey Doctor Keychain STL, but I'm having trouble opening the 3MF file. Can you help me with that? Or can you help me with the STL file?
https://cults3d.emulatorsite.com/es/modelo-3d/arte/monkey-doctor-keychain-stl
Great designs.
Best regards.
- 0 j’aimes
Of course I will help you. Send me an email with a description of the problem you are having with screenshots.
- 0 j’aimes
hello, does this file include the right and left side file?
"FORD FIESTA MK7 2012- C1BJ-10174-AC SIDE SKIRT END CAP STL"
- 0 j’aimes
just mirror it in your slicer :)
- 0 j’aimes
hey how can i get a refund for the "volodymyr_max_op_2" model it isnt even opening up on my pc just crashes my slicers
- 0 j’aimes
This happens due to the large amount of memory. Maybe your computer cannot handle such a model. I have added a simplified model, divided into parts. Try ing them.
- 0 j’aimes
Hola, como estas? te consulto. Hay alguna diferencia entre los dos modelos que tenes de hecate?
- 0 j’aimes
Hi. Describe your problem in more detail pls.
- 0 j’aimes
Hello, I have the model from you
Cheops class warship Pyramid Stargate Ship purchased.
When loading into the Bambu Slicer, non-manifold edges showed up, which can be repaired.
I print the Cheops (opened) parts.
But the parts don't have straight top and bottom surfaces, which causes problems for me. Probably comes from cutting the object. Is there an upgrade for this?
greeting
- 0 j’aimes
send screenshots on my email
- 0 j’aimes
email adress please
- 0 j’aimes
- 0 j’aimes
Вітаю! Чи дозволяєте Ви продаж фізичних виробів з ваших файлів? Спадобалась модель, але я повинен спитати перед купівлею)
- 0 j’aimes
Вітаю. Відповідно до ліцензії, що вказана для кожного файлу. Якщо ліцензія PU то використовувати для комерційних цілей заборонено.
- 0 j’aimes
Додатково можемо укласти угоду на здобуття Вами такого права.
- 0 j’aimes
Дякую, наразі тільки починаю, тому шукаю авторів які дозволяють безкоштовно. Можливо трохи пізніше)
- 0 j’aimes
Does the HECATE HEKATE GODDESS STL V3 need some kind of after printed? If yes, is it included in the file? Thank you, Joana
- 0 j’aimes
what kind of printing do u use?
- 0 j’aimes
Anycubic Vyper printer with filament
- 0 j’aimes
I cannot say anything because this model is not adapted for printing on fdm printers
- 1 j’aime
buenas tardes algun diseño de protesis para la otobock 3r95?
- 0 j’aimes
Unfortunately, not yet.
- 0 j’aimes
where are you from?
- 0 j’aimes
а слабо було свій текст зробити? бо навіть опис сплагіатили
- 0 j’aimes
???
- 0 j’aimes
Аааа то це ти той заздрісний щурик що плакав в кометарях))) ти запатентував собі якийсь текст чи що? не зрозумів. Не злись, Бог тебе любить, і Я
- 0 j’aimes
ти за язиком слідкуй. бо ще невідомо хто тут щурик
- 0 j’aimes
Боже, чуваче, набери мені. Вияснимо що тебе турбує. Я впевнений що це можна владнани без нервів. Бо це що ти тут пишеш це без сенсу.
- 0 j’aimes
Hi. My name is Gustavo. I loves the prothesic leg cover for 3r85 dynion. Is my model but i would likt to know if it fits for creality K1
- 0 j’aimes
u need at least 36 cm of workspace height
- 0 j’aimes
"Протез-обтекатель OTTOBOCK Otto Bock 3r80 Протез колена stl"
Вітаю
Які габарити друку потрібні?
- 0 j’aimes
40 см
- 0 j’aimes
If you could that would be awesome!
- 0 j’aimes
where to ship?
- 0 j’aimes
- 0 j’aimes
Print of Danu did not work. The hood was not connected to the hair and did not print out fully. Is there an update on this?
- 0 j’aimes
Will check and update. Thx
- 0 j’aimes
What kind of printing do you use?
- 0 j’aimes
The picture is misleading. Its shows full color. To color you have to paint all colors. No easy way to do it. I’m disappointed as I do not have the time to sit and paint it. Money wasted for me
- 0 j’aimes
Hi. Thx for purchasing. U want me to paint it for you?
- 0 j’aimes
Can i have the file that DJI Action 4 camera protective case but didnt have gopro mount in the left? i have buy the origin one
- 0 j’aimes
sure. buy it and i will add new version for u
- 1 j’aime
oh u bought it alredy. okay i will send ne file to u
- 1 j’aime
Thanks a lot
- 0 j’aimes
I got the file~ thanks
may i ask what do you use to print the model? tree or normal?
- 0 j’aimes
tree s
- 0 j’aimes
Tanks i will try it ! good design~
- 0 j’aimes
do you use 0.2 nozzle or 0.4 nozzle?
- 0 j’aimes
0,4 nozzle 0,2 layer
- 0 j’aimes
hi there have you built the mini jet boat what size bed is needed many thanks darren
- 0 j’aimes
245mm
- 0 j’aimes
235)
- 0 j’aimes
hi there have you built the mini jet boat what size bed is needed many thanks darren
- 0 j’aimes
245mm
- 1 j’aime
Топ ДЯКУЮ!
- 0 j’aimes
Hey, love your work.
Do you have an STL of the Fiesta's driver side rocker/skirt end cap? I figured I might be able to invert it, but I have 0 cad experience. Sorry if this double posts I'm fighting with the website right now.
Thanks in advance,
Michael
- 0 j’aimes
just mirror it in the slicer :)
- 1 j’aime
If you do not succeed, write and I will help.
- 1 j’aime
Thanks! Can't believe I didn't think of that
- 0 j’aimes
U are welcome:)
- 0 j’aimes
Hello! I have purchased a few of your files. The MORRIGAN CELTIC GODDESS STL is not loading into any of the 3 slicing programs I use. Can you advise me on how I can work with this file?
- 0 j’aimes
Hi. Can u send me video to my email?
- 0 j’aimes
Fix the model. Thx for purshasing
- 0 j’aimes
Hi, I bought Astra H 04-10 Shelf Anti Vibrate bump stop lid clip STL from you.
Model is great and precise, but I can't get it to print properly in ABS on my Creality K1 no matter what orientation and settings I choose. Do you maybe can get me some tips on how to orient the print?
Thanks in advance,
Aleksandar.
- 0 j’aimes
Hello. It should be printed with phrozen nylon green resin (or another resin of a similar type). SLA printing. I have already printed more than 50 of them. And they all turned out perfect.
- 0 j’aimes
i can share the model with s for sla printing
- 0 j’aimes
Hi, I bought this Hecathe model, but I don't know why. It's three figures of different sizes when I print them with the Anycubik resin printer. Could you tell me how to make them the same size? Thanks.
write to my email with pictures what exactly issue do u have with/ [email protected]