RC MODELS FACTORY® is a ed trademark.
Selling or sharing .STL files is strictly prohibited.
If you want to sell 3d printed models that I designed, please me at the email in my profile.
My creations is here:
https://www.rcmodelsfactory.com/gallery/
https://www.youtube.com/@rc_models_factory/
https://www.instagram.com/rc_models_factory/
👋 Bonjour à tous ! Ce fil de discussion est public, alors restons gentils et respectueux. Pas de publicité, de spam ou de choses désagréables !
🇨🇿 Pays du membre : Tchéquie
🌐 Langue préférée du membre : Anglais. Vous pouvez traduire en ligne via DeepL.
💡 Vous faites référence à un modèle en particulier ? Ajoutez le lien, le titre ou le numéro du modèle.
🖼️ Vous souhaitez publier des photos ? Utilisez un hébergeur gratuit comme ImgBB et collez les liens dans le message.
✍️ Astuces de rédaction : Utilisez le format Markdown pour structurer vos textes et les rendre plus lisible
Hallo
Ich habe bei Ihnen das Modell ...Stridsvagn 103 c ...in Maßstab 1/16 erworben . Das Modell ist wunderschön aber irgendwie finde ich zwei Teile nicht.
Es fehlen die Teile :AB 17 und AB 51a
Mit Freundlichen Grüßen
Hi,
thank you for the information.
The missing parts have been added.
I apologize for the inconvenience.
Best regards,
RC Models Factory
hallo ich habe eine nachricht bekommen für ein update lane auf die internetseite und kann sie aber nicht runterladen
Good evening,
Unfortunately, I have no influence over the functionality of the platform. I don’t see my model purchased on your profile, nor do I have you in my list of buyers, so there may have been an issue with your purchase. I recommend reaching out to the platform s, who should be able to assist you with this matter.
You can them at [email protected].
Thank you for your understanding.
Best regards,
RC Models Factory
Can your models be scaled up in mesh mixer to 1/6 scale?
Dear Sir/Madam,
Thank you for your interest in my models. I do not recommend scaling them to 1/6, as they are not designed for this size. The openings may not align properly, and, most importantly, critical and highly stressed mechanical parts may fail. As a result, the model may not function as expected.
Best regards,
RC Models Factory
Thank you for the response. I'm only going to be using for a static display, and not really looking to make a functional RC version. Your work looks fantastic, btw.......
Thank you for the compliment, I really appreciate it. If the model is intended to be static only, then there’s no problem adjusting the scale to 1/6.
Best regards,
RC Models Factory
Hi.
I’d like to add that the scale can be changed much more easily directly in the slicer.
Best regards,
RC Models Factory
Hallo, bitte aktualisieren sie die Beschreibung vom Leopard.
Hello
I am working on printing the jagdtiger. I am going to start on the upper hull, but I see that in AD2 there is no slot for AD1 to fit. Can I just mirror AD6? There the slot is present
Regards
Hello,
I have ed a new version of part AD2 separately as "AD2 new.zip". Please this part.
Best regards.
RC Models Factory
Thanks for the quick response!
I purchased on 30 mei 2024 transaction30-05-202408:440220769478119205
On iban nl58citi2032 3299 13
Hello,
I repeat once again, I cannot find any record of your purchase. If you believe there is an issue with your purchase and you do not see it in your profile, please the platform for further assistance.
Best regards,
RC Models Factory
Its not my mistake but i wil never ever purchace anyting from you anymore its not my mistake that tere is somting not whrite cults dossent send me a message for nothing
Hello,
If you are experiencing an issue with your purchase, please the s of the Cults3D platform here: https://cults3d.emulatorsite.com/en/. Unfortunately, I have no control over the platform’s functionality, and there is nothing more I can do from my side.
Cults3D has not provided me with any information or documentation to assist you further.
I would like to emphasize that I value a fair approach to all customers. If a customer is entitled to , it will be provided without delay. I have no reason, nor is it in my interest, to harm anyone.
Best regards,
RC Models Factory
correction i have mail from cults3d that i purchast but i also can fint it i paid 38 euro for it
Hello,
If you purchased the model on Cults3D, the update should also be available for you to . However, I couldn’t find any of my models in your profile, and I also couldn’t find you in the purchase history, so it is very likely that there has been a mistake.
Best regards,
RC Models Factory
mayby wht thingiverse i have purchased
i cant the update?
Hello,
the model update can only be ed if you have purchased the model. However, no purchase is recorded in your profile.
Best regards,
RC Models Factory
Hallo can you tell me where I can find those parts https://ibb.co/f04HhXM
Hello,
Which model do you have in mind? Could you please list the specific parts you are unable to find, or indicate the page number in the construction manual? I apologize, but I am unable to open external links provided by third parties. Thank you for your understanding; I will do my best to assist you as quickly as possible.
Best regards,
RC Models Factory
It is the Leopard model 1:10 and the part I missing is the snowcross mountet on the front of the tanks page number 91. thanks for quick respons
If I understood correctly, it should be part A86 18x.stl in the folder A korba_hull. :-)
Best regards,
RC Models Factory
It is them. Thanks you and keep up the good work :D
hi you design is very good , but some old people do not have printer.so i can print for them .and i want to list the service online.if the file cost 30$ i will send u 30$ by paypal.for each printing. each one i pay u copyright.i already work with designer of https://cults3d.emulatorsite.com/en/s/RC_3D_Tanks/3d-models. i list lot at ebay example : https://www.ebay.com/itm/266939922726 if it is fine ,i will list the service ,start paying u when i get order. i understand your copyright is very important. i will not list the service till u approve.thanks
Hi,
thank you for your offer and interest in my designs. Unfortunately, I have to decline the commercial collaboration. I appreciate your understanding regarding copyright.
Best regards,
RC Models Factory
What is your email address?
Hello,
[email protected]
schon gut, ich spreche kein Tschechisch und Sie kein Deutsch und der Übersetzer ist ungeeignet
OK, I don't speak Czech and you don't speak German and the translator is unsuitable
Now UPDATE + UPGRADE v1.1 - 02.06.2024
1) Added missed parts
2) Added upgraded parts (parts for led, better fit and better half axis of the idler wheel)
3) Added new parts "easily detachable arms and axle" (suspension) - similar to kit parts
4) Added new parts for "firmly mounted turret" - upgrade directly from the kit
Schreiben Sie doch eine detaillierte Liste mit den Unterschieden zwischen den Dateien und dem Komplettbausatz. Das wäre ein Service.
Sie haben nur die Hälfte von dem was ich sagte verstanden. Das es viel Arbeit ist spricht ja niemand ab und der Preis wäre auch soweit ok, auch wenn 85,-€ schon obere Liga sind. Aber wenn man dafür nur eine Minimale Version erhält obwohl mit der umfangreichen Version geworben wird dann stellt man sich schon die eine oder andere Frage und das ist auch Legitim. Immerhin sollte auch der Käufer am Ende zufrieden sein und nicht nur der Verkäufer !
Your remarks are completely unfounded and false. I am not advertising the model as something it is not. It is clearly stated in all caps "WARNING" that this is not the same version as the kit I offer. This is also clearly declared on my website, where this model is listed alongside the kit. Additionally, the key features of this model are precisely listed. I REPEAT, THE MODEL IS FULLY FUNCTIONAL, AND ITS FUNCTIONALITY, USABILITY, OR VISUAL DESIGN IS IN NO WAY AFFECTED BY THIS.
RC-Panzer Leopard 2A6, Bei dem Preis nur die vereinfachte Version der Dateien? Ok, viel Arbeit steckt da drin und alles gut, aber bei 85,-€ nur eine simple Ausführung, das spornt nicht an die Datei zu kaufen. Schade
Hello. Thank you for your interest. However, I apologize in advance for responding this way.
I spent at least three-quarters of a year creating this model, going through individual photographs, and repeatedly reworking the entire model, etc. This is to say that I will not offer the model for some 25€. Doing so would only degrade my work, which amounts to thousands of hours of modeling and prototyping. Furthermore, I certainly won't release my commercial kit version. The fact that the 3D print files do not include some kit elements does not degrade this model in any way. This model is fully functional. If I were not serious, I wouldn't provide this information to clients at all and could avoid comments like this one. If you don't like the offered 3D print model, you can purchase the kit.
And last but not least, making this model available is a gesture of goodwill towards the community. This model was never intended to be released for 3D printing.
Best regards,
RC Models Factory
Zdravím, mohl bych poprosit o aktuální manuál na Jagdtigera ? Předešlí model byl odstraněn a aktuálně při stavbě bych raději ten aktuálnější manuál :)
Dobrý den,
bohužel nový manuál není vůbec kompatibilní s vaším modelem. Je tedy zcela nepoužitelný. Ale mohu Vám dát k dispozici tento nový model. Pro více informací mne prosím kontaktujte do mailu.
S pozdravem,
RC Models Factory
Good afternoon, I have bought the model TIGER H1 RC 1/16 and I would like if possible, to provide me with details of the placement of the timing belts in the gearbox, as I have ordered the 8 units of them, and by the drawings I can not understand in what position they are placed.
Thank you very much.
Pedro Muñoz Cortes
Hello,
please send me e-mail.
Hallo, Ich wollte gerade die Datei kaufen und muss leider feststellen das die raus ist. Gibt es die wirklich nicht mehr? Beste Grüße
Hallo, Ich wollte gerade die Datei kaufen und muss leider feststellen das die raus ist. Gibt es die wirklich nicht mehr? Beste Grüße
Hello, when will your Leopard 2A6 tank be released?
Hello,
leopard 2A6 has already been released as a physical product (kit), I don't plan to release the files at the moment.
Best regards.
very interested in your Jagdpanther can i ask would it be possible to have it scaled to 1/16 scale? and are all the hull details separated for better printing ? thanks
Hello,
I do not recommend sizing down on my models. Especially on models that are equipped with torsion bars.
Best regards.
are ok thank you ; it wasn't to be used as a RC it was just going to be a display model
Hi there, I've printed your 1/10 Tiger and just wanted to say what a great job you've done with the design and backup material. I'll post some pics once it's painted. Cheers.
hello!!!, i just bought your 1 10 strv 103, is there a chance that you could make those fence thingies on the front for it?,
Hi,
thank you for purchasing my model.
I recommend making the front "fence" elements out of metal – due to their position on the front of the vehicle, 3D printing them wouldn’t be ideal in of durability and longevity.
Best regards,
RC Models Factory
hey, thanks for your reply, i was just curious cause some other builder made one, maybe i can ask a friend to help me design them to 3d print, im not good with metal working.
Hi,
It would be possible to use, for example, a brass rod (brass TIG welding wire, brass welding rod) with a diameter of 4 mm. It can be easily cut to the desired length without the need for any special equipment.
Any connectors for these parts can then be modeled and added to the design.
Best regards,
RC Models Factory