Whats the demon tail length in total? I'm pretty short and don't want to end want to end up with a tail bigger than me, lol
- 0 j’aimes
👋 Bonjour à tous ! Ce fil de discussion est public, alors restons gentils et respectueux. Pas de publicité, de spam ou de choses désagréables !
🇩🇪 Pays du membre : Allemagne
🌐 Langue préférée du membre : Allemand. Vous pouvez traduire en ligne via DeepL.
💡 Vous faites référence à un modèle en particulier ? Ajoutez le lien, le titre ou le numéro du modèle.
🖼️ Vous souhaitez publier des photos ? Utilisez un hébergeur gratuit comme ImgBB et collez les liens dans le message.
✍️ Astuces de rédaction : Utilisez le format Markdown pour structurer vos textes et les rendre plus lisible
Écrivez votre message :
15 commentaires
Hi! The tail is about 90-100cm long. I'm 163cm tall and it fits well!
- 0 j’aimes
Hi is the demon tail ABS or PLA?
- 0 j’aimes
Hi! I printed mine in PLA+, but you can use any filament you like.
- 0 j’aimes
Hello I was wondering if u could make a custom stand to hold the blades of chaos on please
- 0 j’aimes
Hi! Yes I could do that.
- 0 j’aimes
Thank u are u able to give it like a fire lava crack theme as i wanna kinda match the blades with the fire theme of them and i want it to hold both the blades do u know how long it would take to make as i wanna start printing the blades asap
- 0 j’aimes
I could make it look like a Rock with cutouts for the blades for example
- 0 j’aimes
Yea that would be sick a rock where the blades sit in it could u give the rock lava cracks and like a fire theme to it so I can paint it to give it that fire look like a volcano lava rock
- 0 j’aimes
Will try!
- 0 j’aimes
Thank u do u know roughly how long it would take to do
- 0 j’aimes
Hey do u know how much it would cost for u to make this for me
- 0 j’aimes
Hi! I actually was able to finish it last night. I would charge 10€ for it! Will the file asap.
- 0 j’aimes
Yes please can’t wait to see it
- 0 j’aimes
Thank u so much for doing this for me
- 0 j’aimes
https://cults3d.emulatorsite.com/de/modell-3d/kunst/lava-rock-stand-for-blades-of-chaos-95c17d1c95ae099bd640
Check it out! Let me know if you need any changes.
- 0 j’aimes
That’s sick but are u able to make it so the blades actually sit on it not hang off of it as I want it as an actually stand if that’s possible
- 0 j’aimes
I can, crossed like they are or pointing the same direction?
- 0 j’aimes
Yes please I just want any the rock a bit higher and for them to actually sit on it like a proper stand for a display piece
- 0 j’aimes
I reckon keep the crossed like that but for them to sit better on the rock and for the rock to be a bit bigger
- 0 j’aimes
Hey did u end up making the changes to the stand as I wanna buy this today
- 0 j’aimes
Hey do I just buy that file and will u add the new style into that file or do I wait and buy the new file once ur done
- 0 j’aimes
Hi! I can do the changes but I won't have the capacity to do so until mid next week! Sorry for the delay
- 0 j’aimes
hey thats okay ill just this one for the moment as it will do can u just the new design to the same file when u do it please saves me having to buy it twice
- 0 j’aimes
Hey sorry to be a pain how hard would it be for u to make the eagle or goat head handles for the blades of chaos
- 0 j’aimes
Hey any chance u would start that stand this week as I’m nearly done printing the blades
- 0 j’aimes
Hi! I just ed screenshots of the new rock version to the listing. Let me know how you like it!
- 0 j’aimes
How practical is it for sitting down? Will i have to take it off to sit?
- 0 j’aimes
Hi! I think sitting down could be problematic but I honestly haven't tried yet!
- 0 j’aimes
How practical is it for sitting down? Will i have to take it off to sit?
- 0 j’aimes
Hey I wanted to reach out to see how much it might cost to have a few things made. My wife and I are huge monster hunter fans and her chosen weapon class is hard to find 3d models of. I saw your insect glaives and was going to see if you could create the STL files for a few weapons and how much that might cost. We may not do all of them but would be interested in the following ones:
- Blue God (Kirin Insect Glaive)
- Deathstaff Vaal Entoma (Vaal Hazak Insect Glaive)
- Kulve Taroth Insect Glaive
- Xeno'jiiva insect glaive
- Kirin Thunderpearl (Kirin Switch Axe)
- Velkana Switch Axe (Velkana)
- Almudron Switch Axe
Let me know if you have any questions.
Thanks,
- 0 j’aimes
Hi there! I'm currently nor taking commission until mid December, if that's okay for you we can discuss the options!
- 0 j’aimes
Yeah that's fine just trying to get an idea of what I need to have ready by then if we do this.
- 0 j’aimes
Hey there my hinge parts broke I'm wondering if I can just get the STL for the circle and bottom jaw hinge thank you
- 0 j’aimes
Hello, where can I find the guide for assembling the tail?
- 0 j’aimes
Hi! I just realized I ed the zip without the guide, will add it shortly!!
- 0 j’aimes
Hi i'm looking for Zinogre weapon for a long long time your dual blade is amazing but my dream weapon is long sword.
so there is any chance that you made a zinogre long sword ?
- 0 j’aimes
Hi there! Sorry for the late reply, I'm currently booked out for commissions until September!
- 0 j’aimes
This is my dream project !! if there is a hope i'll wait to the end of the wold haha.
- 0 j’aimes
Then let's do it as soon as possible! Please me at the beginning of September again, then we can make this a Project! (I love the longsword too)
- 0 j’aimes
Hell yeahhhh!! Do you need me to you on cults3d or anywhere?
- 0 j’aimes
Either here on Cults or my Etsy Page:https://moroprops.etsy.com
- 0 j’aimes
Hi there!
I'll be available for this Project as of September 9th, please me via Etsy or Email to [email protected] so we can make plans for the Zinogre Longsword!
- 0 j’aimes
ARGONIAN REPTILE HEAD MASK MOVABLE JAW
Are you able to add some customisations to this STL? Ideally some extra horns from the nose back and some under the chin?
- 0 j’aimes
Hi there! Yes I can add a more custom Face and Horns as well. Could you give me a reference of what you would like to have?
- 0 j’aimes
is the blades of chaos a single print file? or multiple stls?
- 0 j’aimes
Hi! It's multiple pieces to put together
- 0 j’aimes
Hello, i didn't find a way to connect every piece together it's impossible to do so ..
- 0 j’aimes
Hi! I will an assembly guide shortly. If you still are having problems with it then I can refund your purchase also.
- 0 j’aimes
Hum the parts won't really fit correctly ..So can I ask you for the refund plz ?
- 0 j’aimes
Refund is sent, may I ask which pieces don't fit together so I could adjust the model?
- 0 j’aimes
The top piece of the blade and the top piece of the back ..
- 0 j’aimes
I still can't see the refund ..
- 0 j’aimes
It seems like the Refund is still processing - see screenshot
https://drive.google.com/file/d/114EG0nH0QhJ9a5hrLmdBd8xy16ZK-irK/view?usp=sharing
- 0 j’aimes
hello im looking for Brachydios Dual Blades
- 0 j’aimes
Excuse me for abruptly coming to you.
Can you fill in the holes in the blade and the back?
- 0 j’aimes
Hi! No problem, which holes do you mean? They were intentional so you could install tiny fog machines. But I can fix it when you can show me which ones to fix :)
- 0 j’aimes
Thanks for the reply.
It would be helpful to have parts to fill the holes.
- 0 j’aimes
Ah yes, no problem. I'm currently traveling but I will work on it as soon as I can (a week maximum)
- 0 j’aimes
We look forward to working with you!
- 0 j’aimes
Hi!
I am currently unable to fulfill your Request, but I can issue a Refund for your Purchase.
- 0 j’aimes
Hello.
May I ask you to do so?
- 0 j’aimes
Hello! I would like to buy your model to produce and sell. But it says for personal use. Is there any chance to change it or I will design the same. I would prefer to buy it from you to not spend time on design.
Hi! If you ask that nicely the answer is no. Good luck deg!
Thank you!