Bonjour je viens d'imprimer le fichier, le fichier présente plusieurs défauts merci de bien vouloir me rembourser le fichier merci
- 0 j’aimes
👋 Bonjour à tous ! Ce fil de discussion est public, alors restons gentils et respectueux. Pas de publicité, de spam ou de choses désagréables !
🇦🇷 Pays du membre : Argentine
🌐 Langue préférée du membre : Espagnol. Vous pouvez traduire en ligne via DeepL.
💡 Vous faites référence à un modèle en particulier ? Ajoutez le lien, le titre ou le numéro du modèle.
🖼️ Vous souhaitez publier des photos ? Utilisez un hébergeur gratuit comme ImgBB et collez les liens dans le message.
✍️ Astuces de rédaction : Utilisez le format Markdown pour structurer vos textes et les rendre plus lisible
Écrivez votre message :
79 commentaires
Hi, I wish to buy it but with no legs (Just the Chair). I have the Ackbar 6" figure and wish to sit it in his command chair. Is possible you add one with no figure? Thanks...
- 0 j’aimes
hey i have ed cod abigail figure but its only the base no figure included
- 0 j’aimes
Oh, sorry, I´ll refund you and fix it
- 0 j’aimes
bro el archivo de eminem viene mal no sale la cabeza podrias corregirlo?
y de paso separlo de la base
- 0 j’aimes
Hola, ok, lo chequeo
- 0 j’aimes
Hola, disculpa la demora, ya lo arregle, ahora te reemblolso la compra asi lo bajas denuevo
- 0 j’aimes
Hola Luciano, ¿hasta qué tamaño se puede imprimir el Chewbacca? Escala 1/12, es decir, una altura de aproximadamente 19 cm. ¿Sería suficiente el nivel de detalle?
Saludos Martín
- 0 j’aimes
Hola Martin, si esa altura esta perfecto, saludos!
- 0 j’aimes
Hello, I bought "Spidey" model yesterday, a figurine of Spider-Man hanging down from a street lamp (https://cults3d.emulatorsite.com/en/3d-model/art/spidy-2).
When I open the file in Bambu Studio (did not work in Blender) I see two figurines blended together with the bigger one being cut open.
I am unable to separate these two. Could you the repaired file?
Thank you.
- 0 j’aimes
Hi, the model is one piece, I opened it in Zbrush and it had no problem, if you want to i can it from there and email you
- 0 j’aimes
That would be great. Is there a way to write you a personal message with my email? I am not keen to post my private email publicly on the internet :)
- 0 j’aimes
This is what it looks like on my side when I open it for printing.
https://ibb.co/PstvqW1x
- 0 j’aimes
wow thatt´s weird, mail me at [email protected]
- 0 j’aimes
I sent you two emails from two different addresses so I hope one of them makes it through.
- 0 j’aimes
I don´t see any
- 0 j’aimes
Just now I have sent you an email from gmail, this time it has to go through.
- 0 j’aimes
bonjour,
j'ai téléchargé votre fichier "conan", mais il y a un problème.
il maque le bras droit. en fait il y a deux fois le bras gauche.
merci de rectifié et de m'envoyer le bras manquant.
cordialement
- 0 j’aimes
Sorry I can´t fix it, I lost the file, I will refund you
- 0 j’aimes
ok thank you
- 0 j’aimes
Hello,
the "Bruno Delacroix" File has two pictures with two different models. Which one is actually right?
I am interested in the model on the grey picture with the spikes on shoulder protector. Not looking for the purple model with lion head on shoulder.
https://cults3d.emulatorsite.com/de/modell-3d/kunst/bruno-delacroix
Greetings Soge
- 0 j’aimes
Didn´t notoce that, i ist the one with the lion head, give ac couple of days and I´ll the other one
- 0 j’aimes
Thank you very much. Looking forward to the .
- 0 j’aimes
Hello,
it is been over 2 weeks now and I would like to ask if you will the charakter on the grey picture in the next time?
- 0 j’aimes
i want a refund of the Super Nero Figure File, the hair is completely broken and is not gonna print
- 0 j’aimes
i want a refund of the Super Nero Figure File, the hair is completely broken and is not gonna print
- 0 j’aimes
Hello! For the "Mecha Sonic" 3D Print File, do you have any photos of what it looks like actually 3D printed? I wanted to see an example before I attempted printing the file myself.
- 0 j’aimes
Hola Luciano, descargue el modelo completo de Jason voorhees pero no consigo imprimirlo con éxito. Cuando llega a la parte del hacha se termina saliendo del soporte. Alguna recomendación?
- 0 j’aimes
Hola, con el Meshmixer se pueden hacer buenos soportes, hay tutoriales en youtube, espero te sirva
- 0 j’aimes
For the "Imperial Commando Droid", I see no insignia indicating that the Galactic Empire owns it and not the CIS.
- 0 j’aimes
could you send me a picture of it?
- 0 j’aimes
https://cults3d.emulatorsite.com/en/3d-model/art/commando-droid You call it Imperial Commando Droid in the description. It's just a minor nitpick for me since I grew up watching Star Wars. (Disney can suck it)
- 0 j’aimes
is it this one? https://www.pngwing.com/en/free-png-dwecw
- 0 j’aimes
I'm buying you the George file. On the other hand, the figurine doesn't have the teeth?
- 0 j’aimes
Hi, you are right, i`ll fix it, I can refund you so you it again when I do it
- 0 j’aimes
I sent an email
- 0 j’aimes
Hello, I was wondering if I could commission you to finish the head on your Carl model from TWD? I just need the head
- 0 j’aimes
Good evening
After purchasing this, I cannot get the arms on the model. Any ideas
- 0 j’aimes
What's the file?
- 0 j’aimes
Good evening
After purchasing this, I cannot get the arms on the model. Any ideas
- 0 j’aimes
have problem with slice the chucky penholder.
- 0 j’aimes
What`s the error?
- 0 j’aimes
error on model and error at slicing in Cura
- 0 j’aimes
Ok, I`ll refund you and see if I can fix it
- 0 j’aimes
Hello
can i maked on that stl a only x1 holl for pens? and if i can sell that like a finisch print?
- 0 j’aimes
Hi, you mean make one hole only?
- 0 j’aimes
Yes ,like biger one gole for more pens, and if i can sell it then like a finisch print with that big hole?
- 0 j’aimes
Ok, you can sell prints of course
- 0 j’aimes
Okej thanks.. that mean i can maked a bigger hole and i can sell it like a finisch print right?
- 0 j’aimes
that´s correct
- 0 j’aimes
I'm ok for now, I have one that I'm re-mixing for my needs. Thanks.
- 0 j’aimes
ok
- 0 j’aimes
This is 1 STL or multi-files? I'm asking because I want to modify into a gavel with a light Sabre handle as a gift. I'm using Tinkercad and there are file-size limits.
- 0 j’aimes
Hi, what´s the file?
- 0 j’aimes
I'm asking about what was published, by you. Is it one large STL or is the model done in multiple files? I'm interested in the Grogu file.
- 0 j’aimes
I have several grogu files, one that he is flying with mando that is multiple parts, then the pen holder one file, and the piggy bank, two files
- 0 j’aimes
My friend I have tried ing you via email but sadly no response 😕
- 0 j’aimes
Hi, sorry, I haven´t been checking my email
- 0 j’aimes
Please kindly check
- 0 j’aimes
Hello there, just purchased the Bangalor model you have from apex legends, There appears to be a missing file for the legs
- 0 j’aimes
in fact there appears to be numerous missing files as in the parts picture theres a good few more pieces then the 5 in the the file
- 0 j’aimes
Hi, I´m sorry, I lost that file, so only thing I can do is Refund you
- 0 j’aimes
if you could that would be awesome thanks
- 0 j’aimes
He comprado y descargado el modelo de Chewbacca y no hay ninguna figura. Sólo un modelo de «disco» redondo. ¿Falta algún archivo o me han estafado?
Hola, lo reviso
Te reembolsé, lo arregle y lo subi