I buy this set forearm and grips, but where I get the Picantinny adapter file to install under the forearm for the 1377
- 0 j’aimes
👋 Bonjour à tous ! Ce fil de discussion est public, alors restons gentils et respectueux. Pas de publicité, de spam ou de choses désagréables !
🇨🇿 Pays du membre : Tchéquie
🌐 Langue préférée du membre : Anglais. Vous pouvez traduire en ligne via DeepL.
💡 Vous faites référence à un modèle en particulier ? Ajoutez le lien, le titre ou le numéro du modèle.
🖼️ Vous souhaitez publier des photos ? Utilisez un hébergeur gratuit comme ImgBB et collez les liens dans le message.
✍️ Astuces de rédaction : Utilisez le format Markdown pour structurer vos textes et les rendre plus lisible
Écrivez votre message :
21 commentaires
Hello. It is meant for aluminium rail, conected by two bolts and nuts. You can buy it f.e. in airsoft shop. You can find some stls for picatinny rail on thingiverse, but my opinion is that plastic rails are too soft.
- 0 j’aimes
Zdravím pane Kejval, chtěl jsem se zeptat zda byste byl ochoten poskytnout stp modely pro: https://cults3d.emulatorsite.com/en/3d-model/game/margolin-grips zakoupil jsem od Vás modely ale bohužel náš model zbraně je z roku 1957, takže střenky jsou kratší a mají pár prvků na jiném místě, pokud byste modely poskytl, rád vám je po úpravě zašlu zpátky abyste je mohl zveřejnit. Děkuji
S Pozdravem Rada Petr
- 0 j’aimes
Zdravím. Je mi líto, ale starší modely jsem dělal dříve ve Fusionu360, od kterého jsem se vrátil k SolidWorksu a moje modelové soubory jsou teď někde na cloudu Autodesku a tím pro mě nedostupné.
- 0 j’aimes
I bought grips for Margolin, is it possible to get step file since I would like to shorten the grip to fit it into Baikal Margo?
- 0 j’aimes
I am really sorry. As I designed in Fusion360 and recently went back to SolidWorks, my F360 files left somewhere on Autodesk cloud and I do not have to them anymore. That is the reason I will never get back to Autodesk.
- 0 j’aimes
Sa vz.24 / 26 grips and foregrip:
How hard do you think it would be to combine the foregrip with the magwell and print it all as one unit?
- 0 j’aimes
Hi. It would not be able to assemble with a gun if it was in one piece.
- 0 j’aimes
Not usually, however there may be a case where you could.
- 0 j’aimes
Well, you can combine it in any stl editor with simple boolean operation and print it as one piece.
- 0 j’aimes
Hello, will this work for new (plastic) crosman 1377?
https://cults3d.emulatorsite.com/en/3d-model/game/crosman-1377-1322-grips
- 0 j’aimes
Hello, it works for both Crosman 1322 and Crosman 1377 (this one https://www.crosman.com/crosman-american-classic-177-brown )
- 0 j’aimes
bon jour, ne m'avez toujours pas Envoyer le fichier Pour le crossman 1377 , La prise en main sous le canon pour la pompe!
Voici mon mail.,
cordialement
- 0 j’aimes
Sent. Sorry for issues.
- 0 j’aimes
- 0 j’aimes
bonjour, j'ai acheté le kit pour le cosman 1377 pour le transformer en carabine mais il manque la parti sous le canon (le grippe pour la pompe!
- 0 j’aimes
Write me your email adress, i will send you the file.
- 0 j’aimes
- 0 j’aimes
Crees que se podrá reducir y modificar para crear una funda para los air pods ?estaria bien
- 0 j’aimes
Caja makita
- 0 j’aimes
Hello, I am afraid that I do not understand your request very well, but you can modify dimensions using scale in slicer.
- 0 j’aimes
slecht gevormde kolf op zich ziet het er mooi uit maar totaal niet bruikbaar hoop geld betaald voor vlut ding
- 0 j’aimes
I am sorry that you are not satisfied with your prints. I have mostly very good on design so there is no need to change it at the moment.
- 0 j’aimes
Hi. Any chance you may have the CAD file for Solidworks, .step or .iges, for this Mag Base. I printed one and it would work great but I would like to make some tweaks for a perfect fit on my CZ Shadow 2 with Kadet adapter. Wanting to convert the 10 round mag to 12 rounds. Thanks
- 0 j’aimes
Hello. Send me your request via email to [email protected], I will send you back step file.
- 1 j’aime
Salut! Can you post a version just with normal flat sides? I have a TT with extended grips that goes down past the magwell.
- 0 j’aimes
TT-33 extended magazine shoe version without side plates added.
- 1 j’aime
HI! I was just wondering, what orientation would you suggest printing the Tokarev magazine extension in?
- 0 j’aimes
Hello. For most magazine shoes i recommend to print it on back side (oposite from shooting direction), for those tiny rails which holds on magazine body should be tough enough to hold. Ofcourse use s at least on a printing bed and brim is recommended.
- 0 j’aimes
Bjr le talon rallonge pour tokarev et fonctionnel ? Cdlt
- 0 j’aimes
oui, fonctionnel. En anglais s'il vous plaît
- 0 j’aimes
C possible de ment fabriquer un
- 0 j’aimes
Hey there. I took a peek at your https://cults3d.emulatorsite.com/en/3d-model/various/gs450l-logo and was wondering if you would be abel to do the same thing except for a 1985 GS450GA Suzukimatic. I would be willing to pay of course.
- 0 j’aimes
Hello. Send me your request at [email protected] . I guess it shall be easy to do, just need some more informations from you.
- 0 j’aimes
I just bought the CZ p10m base plate model, just curious as to the functionality of the z shaped plastic part was
- 0 j’aimes
Hello. It is stop part. Its function is not to allow mag base to slide forward from mag body while shooting.
- 0 j’aimes
Hello. Could I buy just the magazine grip? Do sa vz.24 These two halves. But with a modification, without coats of arms... Clean covers :)
- 0 j’aimes
I am on a work trip now. When I get back home, i will look what can I do. Write me your request and email adress to [email protected]
- 0 j’aimes
Hi, I modified the front grip for your CROSMAN 1377/1322 GRIPS model. Can I have your permission to distribute my version here?
- 0 j’aimes
Hi. If you wish to share your modification, please remove from your model my logo which is placed on front side of foregrip and on sides of grips and stock.
- 0 j’aimes
Will this work with the 9mm versions of theTT-33? Thanks.
- 0 j’aimes
I am sorry but i do not know. But as I know, original tt-33 7,62x25 grips are different from norinco copy, so I guess it will be different for 9mm too.
- 0 j’aimes
I think you're right, pretty sure there's a spacer that goes in the mag well for the 9mm. Thanks for your time!
- 0 j’aimes
hi this file included the forarm (pump grip)???
thanks Omar
- 0 j’aimes
Forearm for Crosman is in file Crosman Grips
https://cults3d.emulatorsite.com/en/3d-model/game/crosman-1377-1322-grips
In files Crosman Stock and Crosman Rail Stones is NOT foregrip included.
If you are asking about UZI, forearm and safety button is included in file.
- 0 j’aimes
Thanks for clarification, I'm in the process to slicing/printing the forearm 90 infill and everywhere or buildplate, wich one you suggest?..and Did I print the part sideways or bottom?
Thanks in advance
Omar
- 1 j’aime
I print on Prusa i3mk2s, using Prusa slic3r, model upside down, s on desk, 90% rightlinear infill, 0.15mm layer with 0.4mm jet, PETG 230°C. Good luck with your make.
- 0 j’aimes
Dobrý den,pane Kejvale,chci se zeptat,jestli je u Vás možné objednat tisk střenek na bajonet vz.58 . Pokud ano,jaká by byla cena za jednu,případně dvě sady. A ješte jaký je použitý materiál,hlavně co se týká odolnosti proti prasknutí. Jirka