By any chance you have Citroen ds3 2011 front bumper tow cap cover?
- 0 j’aimes
👋 Bonjour à tous ! Ce fil de discussion est public, alors restons gentils et respectueux. Pas de publicité, de spam ou de choses désagréables !
🇭🇺 Pays du membre : Hongrie
🌐 Langue préférée du membre : Anglais. Vous pouvez traduire en ligne via DeepL.
💡 Vous faites référence à un modèle en particulier ? Ajoutez le lien, le titre ou le numéro du modèle.
🖼️ Vous souhaitez publier des photos ? Utilisez un hébergeur gratuit comme ImgBB et collez les liens dans le message.
✍️ Astuces de rédaction : Utilisez le format Markdown pour structurer vos textes et les rendre plus lisible
Écrivez votre message :
33 commentaires
Peugeot 307 16 086 826 80 This is the part number, it says air conditioner hose holder clip on it
- 0 j’aimes
Unfortunately I don't have one in stock, I can't make it. :(
- 0 j’aimes
I looked at your store, unfortunately, can you design it with the part number, I have an urgency, I can't use the tool a little
- 0 j’aimes
Hi!
Please post a link here that shows what you want.
- 0 j’aimes
Oki merci
- 1 j’aime
bonjour avais vous aussi le fichier STL Iveco Daily Couvercle d'attelage avant attention Ya na 2 un de chaque cotée cordialement
- 1 j’aime
Salut ! Malheureusement non, j'ai un magasin de pièces détachées automobiles français, donc j'ai beaucoup de pièces Renault, Peugeot et Citroën, mais pas d'Iveco. :(
- 0 j’aimes
Hi friend, if I ask you to make a drawing for me, will you do it, I can share it on your page and buy it, Peugeot 307 air conditioner hose holder clip is necessary, if you want, I can send a picture, if you give me gmail or number, I will share it
- 0 j’aimes
Hi!
I can only do it if it's tangible.
Write the manufacturer's part number here and I'll see if I have one in my store.
- 0 j’aimes
Hi friend, if I ask you to make a drawing for me, will you do it, I can share it on your page and buy it, Peugeot 307 air conditioner hose holder clip is necessary, if you want, I can send a picture, if you give me gmail or number, I will share it
- 0 j’aimes
hi bro
- 1 j’aime
Welcome to the other side!
- 0 j’aimes
Hey, I have ed a remix of your Clio handle,, with the catch for the cable... my question is, am I allowed to?
I AM NOT trying to steal or take your work as my own. I have made a simple modification to the model to allow fitment in other models.
I have priced it the same as your model, as to not appear to undercut.
Please let me know if I must remove this one.
Your model:
https://cults3d.emulatorsite.com/en/3d-model/gadget/renault-interior-door-handle-socket
My :
https://cults3d.emulatorsite.com/en/3d-model/tool/renault-clio-2-internal-door-handle
Kind and friendly regards
CyberSheriff
- 1 j’aime
Leave it alone, just let it be 2.50, mine is listed for that too.. :)
- 0 j’aimes
Wanted to let you know that I plugged some of your stuff on my Weird WWII channels (https://www.youtube.com/watch?v=HhoxZrQOBFw). Hope you get some new fans from it and thanks for the great stuff! Keep it WEIRD!!! Brian
- 1 j’aime
Thank you very much!
I'm glad you mentioned it.
Great!
- 1 j’aime
hola como estas?? consulta por casualida tenes el tirador interno de la puerta del renault fluence
- 1 j’aime
Hi!
Unfortunately, there is none.
- 0 j’aimes
Merhaba Clio 3 2011 model executive kapı kollarına bakmıştım çizimi sizde var ama sadece ön kısmı galiba parçanın arka kısmının çizimide mevcutmudur acaba
- 1 j’aime
Currently, I only have the front, I haven't modeled the house yet.
- 0 j’aimes
do you have the pull handle for the front inside door handle on renault trafic 2001 2014
- 1 j’aime
Unfortunately, I don't have one at the moment.
- 0 j’aimes
That's all there is at the moment.
- 0 j’aimes
Hi, do you have a model of the front cover for the towbar on the Renault Laguna III GT bumper? OEM number: 511800010R Thanx
- 0 j’aimes
Hi!
Unfortunately, it's not available at the moment, but I'll post as soon as I get it.
- 0 j’aimes
Hello bro I want to model of plastic in front of the mirror on the right fender of PEUGEOT 208 please If you can make it I've searched but I don't found it Thank's for you helping
- 0 j’aimes
Okay, I'll let you know when I find it.
- 0 j’aimes
Okey bro I need it soon as possible because someone was stolen mine from the car so I need it soon as possible
- 1 j’aime
Hello, is the scenic 3 compatible with the case with and without makeup? 2714357
- 0 j’aimes
Hi!
I think so.
This model is 2014.
- 0 j’aimes
Buenos días he visto que haces piezas del Renault Clio 3 grand tours,estoy buscando alguien que me haga la carrocería,si te interesa avísame, gracias
- 0 j’aimes
Hello!
I don't know how to do a full body.
I mean, I haven't even tried yet. :)
- 0 j’aimes
Hello, I wish you good work. Renault Clio 2007 model, is there a rear tow bar cover design?
- 0 j’aimes
Hi!
Clio 3?
One is a 3-5 door, the other is a station wagon.
- 0 j’aimes
Thanks for your . Yes, I saw these for the clio 3, but I need the round one. Thanks
- 0 j’aimes
I'll look and let you know if I find it. :)
- 0 j’aimes
Thank you very much for your interest :)
- 1 j’aime
https://drive.google.com/file/d/1GMOKi6ATka7W-9mnbTv2p1BO3U6iMX_3/view?usp=drive_link
I guess that's what you're thinking of then?
I'll do it tonight if I have time.
- 0 j’aimes
Yes. Thank you
- 1 j’aime
oh thank you superman :) i will buy it as soon as possible
- 1 j’aime
Do you have a drawing of REARVIEW MIRROR FRAME BMW E60 E61 ?
https://www.google.com/search?sca_esv=96f8899cfbf0c70b&sxsrf=AHTn8zoO63l54adzQ7WHd4L9cs0hl3oDTw:1740650761864&q=okvir+retrovizora+bmw+e61&udm=2&fbs=ABzOT_BWgmk6Wf6hX_mNdUua9gFt3615itsc35qwkgamp3U5keK8aTwHgqUibDjy4nRwhhBK0pqEUebo0QghRUhef50P85Ugy_w2PeoSzJpRv41QsJ1U3w42VdlAiHeq5bayTMA3XAeS5cuDojrsbIg2Tx_I4iJ3va_Zo4zgGCwi7en1mLsd6DsgvTteRC0hGwBtgjb5kGvT&sa=X&ved=2ahUKEwjL29qyzeOLAxXqgf0HHWKIAgMQtKgLegQIBhAB&biw=1912&bih=962&safe=active&ssui=on#vhid=32PZ8jo9K58WMM&vssid=mosaic
- 0 j’aimes
Unfortunately, there is none.
- 0 j’aimes
together to scan the front bumper caps on Renault Duster 2?
- 0 j’aimes
I don't have a front bumper right now.
- 0 j’aimes
Yes, we can do it that way. Thank you.
- 1 j’aime
Okay.
- 0 j’aimes
I was also making products for my own vehicle as a hobby, but forum friends who use the same vehicle asked if I could make other products. Some of the things they wanted were the products you ed. I don't post online ads for sale, only those who know I have a 3D printer ask on the forum. (I also have a Revopoint Metrox scanner, but I don't have much time to scan and edit)
- 0 j’aimes
I think the best option would be if you send the link of the product which your forum friends would like to have, so they can or purchase it. After that it is between you and your forum friends how you would like to handle the fees of printing it for them. Thanks!
- 0 j’aimes
Yes. I want to produce and sell the models you . (My English is not good enough, so I write with Google Translate)
- 0 j’aimes
(I use Google Translate.)
I'm not doing this for commercial purposes.
I can't track the amount sold etc.
This is just a hobby, if someone likes or needs an item, they it and that's it.
Where would you sell it, online?
- 0 j’aimes
Hello. I'm Koray from Turkey. I want to sell some of the products you've drawn to people in need here. I can give 15% for each product I sell. Since I don't do commercial work, it's likely that there won't be very high volume sales, but it will be an additional income for both of us and help those in need get their work done.
I'm waiting for your answer. Have a good day.
- 0 j’aimes
Hi!
I don't quite understand?!
Would you sell the models I ed?
- 0 j’aimes
By any chance you have Citroen ds3 2011 front bumper tow cap cover?
Doesn't that match this?
https://cults3d.emulatorsite.com/en/3d-model/gadget/citroen-c3-front-tow-eye-cover