Aller au contenu

👋 Bonjour à tous ! Ce fil de discussion est public, alors restons gentils et respectueux. Pas de publicité, de spam ou de choses désagréables !
🇩🇪 Pays du membre : Allemagne
🌐 Langue préférée du membre : Allemand. Vous pouvez traduire en ligne via DeepL.
💡 Vous faites référence à un modèle en particulier ? Ajoutez le lien, le titre ou le numéro du modèle.
🖼️ Vous souhaitez publier des photos ? Utilisez un hébergeur gratuit comme ImgBB et collez les liens dans le message.
✍️ Astuces de rédaction : Utilisez le format Markdown pour structurer vos textes et les rendre plus lisible

Écrivez votre message :

12 commentaires

Hello Thanks for your and s. Now I will be posting on Patreon and there will be some models which will be only available on patreon and also you can get early access to the models. There is also coupon of 25% discount on cults available on Patreon.

You can it now thanks!
http://patreon.com/Utsav_Genesis

Bonjour, votre pagode et magnifique. Je viens d acheter le stl mais pourriez vous m indiquer quelle agent adhésif avez vous utiliser. Je suis un peu perdu et ne trouve pas . Quand je marque sur Google on me donne de la colle.
Je vous remercie.

Hallo und vielen Dank für deine nette Nachricht. Ich hatte die Pagode damals mit einen Kunststoffkleber aus dem Baumarkt für Dachrinnen von der Firma Marley in einer 100g Tube verwendet. Ich habe aber bei PLA auch gute Erfahrungen mit Sekundenkleber als GEL (dickflüssiger) gemacht. Pattex hat auch einige Kunststoffkleber die sehr gut sein sollen. Der Kleber sollte nur nicht zu dünnflüssig sein und eine sehr hohe Klebekraft haben. Meine Pagode ist nun schon ca. 5 Jahre alt und steht im Winter als auch im Sommer im Garten und ist trotz PLA noch in einem super Zustand. Für ein besseres Aussehen wie Stein habe ich meine Pagode mit Granitspray lackiert und vorher mit einem Kunststoff Primer für eine bessere Haftung behandelt. Dieser Lack hält 2-3 Jahre bei mir und musste 1x nachgearbeitet werden. Viel Freude an der Pagode. Würde mich über ein Foto (Make) sehr freuen. Viele Grüsse und danke

Bonsoir pouvez vous me dire si vous autorisez la vente merci je trouve les licences un peu compliquées à comprendre merci

Bonjour, les ventes ne sont pas autorisées. Ces modèles sont destinés à un usage personnel uniquement et contiennent des filigranes pour retracer mes droits d'auteur sur les modèles. Pour une licence commerciale, vous pouvez acheter des modèles gratuits chez moi. S’il vous plaît ez-moi à gamework sur Etsy.

Hallo, besteht auch die Möglichkeit, deine Dateien mit kommerzieller Lizenz zu kaufen?

Hallo, das ist nach Vereinbarung über eine kommerzielle Lizenz ohne "Wasserzeichen" in den Modellen möglich. Bitte kontaktiere mich hierfür in einem nicht öffentlichen Bereich. Du findest mich unter gleichen Namen bei Etsy. Bitte teile mir mehr Informationen mit was du genau vorhast. LG...Gamework

Hallo Gamework,
könnten sie eine Battery Box für die Akkus 20700/21700 entwerfen würde mich sehr freuen.

mfg

Hallo, schaue ich mir gerne die Tage mal an ob das im System t. LG..

HEy,

folgendes Problem meine AAA Zellen klemmen alle in deinen Kisten, habe schon verschiedene Zellen Probiert klappt nicht die AA Variante Funktioniert

Hi, danke für die Info. Überprüfe das nochmal, bisher traf jedoch nie ein Problem auf. Habe die Kisten öfters selber gedruckt und alles t perfekt mit ausreichend Platz. Die Toleranzen der Batterien (siehe Wiki) wurden beachtet. Kannst du mal gucken ob deine AAA Batterien überhaupt noch die Toleranzen einhalten? Die Unterschiede können recht gross sein. Melde mich wieder zwecks Hilfe, Update oder Erstattung. Sende ggf. noch Kontrollmaße. Danke.

Hallo Mazur, ich habe nochmal eine AAA Kiste nachgedruckt und verschiedene AAA Batterien mit unterschiedlichen Durchmessern en dort hinein. Eine meiner Batterien hat einen Durchmesser von 10,3mm (AAA Batterien bis max. 10,5mm nach Norm). Eine einfache Möglichkeit wäre wohl die Kisten einfach im Grössenverhältnis im Slicer etwas grösser zu drucken, z.B. mit 103% statt 100%. Dazu müsstest du deine verwendete Batterie mal messen und sehen was Dir denn dort als Maß so fehlen würde. Druckt deine Düse noch 0,4mm, bzw. verwendest du Düsen von 0,4mm? Wenn das nicht der Fall ist und die Düse ist sehr alt, dann könnte ich mir vorstellen dass hier verschiedene Toleranzen in deinen Druck in Kombination mit sehr grossen AAA Batterien ein Problem ergeben was hier nicht auftritt. Wenn du mit keinen Optionen zufrieden bist erstatte ich Dir natürlich auch den Kaufbetrag der Box. LG und viel Erfolg.

Hi Peter

I have printed the corrected version and it fits perfectly.

Thank you very much for fixing the issue.

Many regards

Bruce Van Essen

  • 1 j’aime

if you feel like it, I would be very happy to see your print of the models as make here on Cults. I printed my boxes in the blue PLA, I personally didn't think white was any better. What color did you print? Many Regards from . :)

gamework gamework

Hello Bruce, i fix the problem and a update from the cover or stacker. Many thanks for your . Can you check this and reply me.:) Best regards ...Peter

Hi again and sorry for another message.

I got my digital calipers out and done some measurements. At this stage I have only printed the AAA case, the AA case is being printed as I speak.

I have printed 2 stackers or whatever you call them. The inside measurements of the AAA case 48.5mm width and 80.7mm

The stacker from the outside edge of the risers are 50.1mm width and 82mm.

So effectively the risers on the stacker need to be brought in around 1mm each on the width and on the length around 1mm each as well.

I hope I have explained this properly.

Many regards

Bruce

  • 1 j’aime

Hi Bruce, many thnaks for your . Please excuse the problems.

I measured my original. The boxes measure 48.7 to 49mm inside and 80.8 to 81mm.

The cover or stackers should be 48 x 79.7mm at the feet. I believe the cover or stackers file contains an error of 50.1 x 82mm. This is too big or to long..

I need some time to check the original stl, I don't have access to CAD at the moment. I'll fix the error and let you know. Can you see if the feet of the cover / stackers still have a slant or bevel? Thank you for your .

Thank you for your prompt reply.

There is no slant on the feet of the stackers as I have the second printed one here untouched that allows me to confirm this.

I can confirm that my printer is printing pretty accurately and good quality prints. As a matter of fact, it is running better than when I got it new after I done some upgrades that keep the printer running true.

I am glad in a way that there may be an error with the file, because I couldn't understand why such a great design just didn't fit and if there had been some slight filing or sanding needed that would be understandable but needing to file so much off was concerning.

I am not in any immediate rush for the corrected file so please do not worry if you cant get this done immediately. More than happy if you want to email me the corrected stl file once done if that is ok.

Email is [email protected]

Good evening. I have printed the first battery box for my AAA batteries.

I used the lid or stacking plate from your other folder.

Can I please ask is there something different on the international crates to the originals as I have really struggled to get the plate to fit sitting as a lid into the crate in the english version. I have had to file a fair bit away from the 4 risers on that print and have still struggled to get it to sit correctly.

Thank you for adding English to your design. I have gone and purchased the pack and am looking forward to printing them.

Regards

Bruce in New Zealand

Your beer crate battery holders are brilliant, however, can I ask does the kit include english writing ? it would need to be microcells for english, or even better have the word "Batteries"

  • 1 j’aime

Hello, thank you for your nice of my Batteries models. New update including a englisch/international version withe Batteries. AA and Batteries, AAA and Batteries, 9V/C an Batteries, 9V and Batteries. Happy Easter to you. Gamework