52 commentaires

Hello, This flower is only as one-element model currently. It is interesting remark, and I think of modifying it somehow, but could You please explain in more detailed way what You'd need? Thanks! :)

I want to add color to the inner parts of the flower. I would buy it and change it myself, but to change it myself I think each petal has to be separate? im not exactly sure, but just looking for plumerias with yellow and white or pink and white

please let me know because im going to the 3D printer tomorrow! I can buy today/tonight

Hello I'm starting to test the technique for assembly of separate petals right now. I'll be able to answer You in 3 hours.
Excuse me You had to wait. Best..

thank you. or what would be even better is if you could add some color, like what a real plumber flower looks like. thank you

Hello, I prepared another version of these (two) Pulmeria flowers with separated petals. It has tight tolerance while assembly and hope doesn't appear too tricky.. (https://gyazo.com/2418f088e970f3f41e330d1dba26d534)

It seem there is a few hour delay in this messaging system, as I juste have received Your note about colors.
Technically I can introduce colouring (gradient) into these petals 3D meshes, but I think It'd help if You let me know the specific 3D format You need the models in, or the process/machine that will be used for color 3D print.. As gradients are more complicated to handle/print..

Hello, could You specify if the problem appeared in Snow Plow or Locomotive, or both? Which stl's are affected? Which printer are You trying to print them on? Bad news is I'll have the opportunity to inspect them only on Monday. Very sorry for this delay. Maybe a good option is to print the rest of stls till then (the ones that appear correct for You...)?

the problem is only for Snow Plow, the files with the problem are numbers 07 and 08, the door with the writing PKP. check and you will see that the K is not closed when you preview in Cura and from that point on it gives problems. thanks for the quick response, I continue to print the rest waiting for the updated files thanks
my printer is Longer LK4 Pro

Thanks. Now I have 100% info. This will be fixed.

Excuse me it took so long, now the fixed files are placed in the area (bamed _rev1).
I haven't found corrupted mesh fragments, but re-modeled the letter 'K' so that it has optimal topology now.
Thanks for reporting this!

Hello
Can I send you a picture of K?

Sure Please drop it at my mailbox: "[at]viggens.com"

Hello, sure, I'll extend the set with the parts as separate, -less files. Currently I'm away, and will be able to rework this on Monday evening. Sorry for this delay.. Best regards.

Hello again, I'm very sorry for the delay. On today's evening I plan to update the object, so that separate parts will be there..

Done-finally.
Excuse me please, You had to wait..

Hello:)

Merci pour cette remarque, mes sémaphores sont des versions avec des indicateurs mécaniques et je n'ai pas encore conçu de versions avec des feux colorés.

Thank you for this observation, my signals are versions with mechanical indicators, and I haven't designed versions with colored lights yet.

Hello, thanks for the info. I'll revise these models lather this night.. Excuse me please the complications..

Hello, added two 'rev_1' files that will hopefully solve your problem...

Hello. No, I haven't got any similar model/item

Best regards :)

Thanks a lot!! my skiing trips in Tirol, wish we had such a lot of snow now here in Poland ;) Best regards!

Hello again! I Finally added the set of STEP parts/files to the s of this item https://cults3d.emulatorsite.com/en/3d-model/various/semaphore-01-for-euroreprap-railroad-system https://gyazo.com/44295899204562109a69e90beeb77be5
https://gyazo.com/b362fd05da2b3d6f394898a556baadaa
they are organized in 24 files, packed as one .zip archive
Please, let me know in case of any troubles
:)

Hello, Thanks for this question. Please give me a day to check this. (They were modelled in format that should be natively transferable to STP, but haven't proceeded with this so far).

Hello again. Please and test these three files ( https://we.tl/t-Kp6yH2NnGm ) and let me know which ones are usable and which ones don't work properly for You, so I can assess if the rest will be 100% compatible with your format..
Best regards! :)

Hello, I checked if it's there and, yes, you should use the pre ed STL that's compressed as zip. Please make sure once more, you had ed it: https://gyazo.com/294e4f0f70179eed6f1bda9b8bc62c0c
(There is no need for s other than seen here - right under of the main sphere)

Hello, thank You for information about this problem.
Please specify which slicer are You using and which model causes problems?
Best regards

(Bonjour, merci pour les informations concernant ce problème.
Merci de préciser quelle trancheuse utilisez-vous et quel modèle pose problème ?
Cordialement)

Hello, which slicer are you using?

For me it worked with Chitubox...

i am using cura

But.. You plan to print it with resin printer, right?

Which model?

no i was planning using filament printer

is it a file for resin printer?

I'm very sorry - I always put it in the description (https://gyazo.com/5592b9291327e4b3bf5456759b7fcf3a) - this file was designed for resin print. Because of its extremely polycount and fine details it will not be in range of FDM tools/machines..

Please me via e-mail:
[at]viggens.com

ok no worries thats my mistake. do u have anything that will be ok to print in filament

Regarding Christmas decors or just any other of my designs? (Quite a few of them are optimized for successful FDM print)

These snowflakes e.g....
https://cults3d.emulatorsite.com/en/3d-model/home/real-snowflake-with-ice-effect-christmas-decor-size-128mm

for some reason the files are taking approximately 45mins to

do you have any idea why its taking so long?

It may be so.. they are extremely large ('Grinch vilage')

Sadly it's top part is much too brittle for FDM - even if scaled up (enlarged) / Malheureusement, sa partie supérieure est beaucoup trop fragile pour le FDM - même si elle est agrandie.

Hello, thanks for asking :) Which design do you have on your mind? / De quel modèle parles-tu exactement dans ce cas ?

item: https://cults3d.emulatorsite.com/:1471949

Hello,
Sure I'll examine the model and will let You know later today with the solution.
Could You please send me the photos of the failed print? (mail:
[at]viggens.com
)
I understand You are trying to print it on FDM, right?

I unfortunately threw out the faulty prints and they were in heaps of little pieces due to the failed prints. Yes, it is FDM, as mentioned above a Bambu Lab P1S and the other printer is a self designed and built printer.

If I can simply have the STL sent without s, I can run my own s

I did not know they were designed for Resin Printing

Hello
I'm preparing the less version for You right now.

The model indeed was designed as optimal for resin printing
(it's emphasized in printing settings description and generally visible on the photos: https://gyazo.com/67dbe043765c33bdbaca1256529dab81)

I believe a pro could obtain a successful FDM print here, but it would require 2-3 x upscale, professional FDM optimized s and some trial and error approach.
I don't recommend FDM though, because resin gives better result and, unlike FDM, simply guarantees successful printing.

Now You should be able to these additional, less parts as you log-in to your buyer's on Cults3D

Thanks for that - They all extract great and look like they are printing well apart from the tongue file. It says the file is corrupted and is only 84 bytes. Tried opening in various cad software and slicers. So maybe that one got corrupted when you saved it? Only the Tongue. The res all works well

Thank You very much for pointing to this. You were right, the tongue stl was corrupted on my side. I've just re ed it. Should be ok now..
Best regards

Thanks -
Will try again

Hello, thank You very much for ing me. These are questions I'm unable to discuss on the open forum, so please write to me via this mailbox: [at]viggens.com

Hello, thanks very much for ing me, I will be able to confirm that when I'm back home, as I'm still away now and your question requires some research on my side.
So I'll be happy to be back with the answer +- on Sep 4th.

Hello, thank You for your questions and excuse me the communication delays, I'm in the middle of my summer vacation trip. Please me via mailbox: [at]viggens.com.
After setting few details, it will be possible for You to obtain commercial limited license.
Best regards.

Hello, thanks for reaching me and excuse me the delay. Yes, I do create models to commercial orders with full usage rights ed to the client. Such models are never published on Cults3D etc..
Also grant limited commercial licences sometimes to models you can see here on Cults - it's separate agreement each time.
You can me via this mailbox: [at]viggens.com

I’ve sent you an email :)

Hello, these are current dimensions of the hut. https://gyazo.com/5c89df86ecff8f7d00a5150c24a789ff You can of course enlarge if you have adequate space on printers hotbed.
If You mean scaling it down. It will be fine on resin printers (except thatching which is 'FDM only' .
Haven't tested the actual minimum scale maintaining the successful printability though.

(dimensions in milimeters)

Hello, thanks for pointing to this. I'll try to re/ short named version in an hour.

Please try to again through your purchased models . New files were added (their names got shortened and then re-compressed): https://gyazo.com/2372591b5505fb993f5a38db0b4a26a2

Thank you, I think that fixed it. I was able to open the files in my slicer now.