👋 Bonjour à tous ! Ce fil de discussion est public, alors restons gentils et respectueux. Pas de publicité, de spam ou de choses désagréables !
🇧🇷 Pays du membre : Brésil
🌐 Langue préférée du membre : Anglais. Vous pouvez traduire en ligne via DeepL.
💡 Vous faites référence à un modèle en particulier ? Ajoutez le lien, le titre ou le numéro du modèle.
🖼️ Vous souhaitez publier des photos ? Utilisez un hébergeur gratuit comme ImgBB et collez les liens dans le message.
✍️ Astuces de rédaction : Utilisez le format Markdown pour structurer vos textes et les rendre plus lisible
I am interested in a T-45 model as well as an F-35 (US Navy version) model, if you make them! I have a friend who is graduating from naval flight training soon and it would be great to be able to print the T-45 plus whichever fighter he ends up flying (F-18 or F035, and I already purchased your F-18 model!).
Thanks!
Hello, yes I can make the T45, but what is the difference between the F35 naval version and the other F35?
Your existing F-35 model (which I found only after I posted my original message - sorry about that) is great. Looking forward to/hoping for the T-45!
Hello, the T-45 model is ready.
I tried to put as many details as possible that can be printed, and left it in a way that can give the least amount of possible.
https://cults3d.emulatorsite.com/en/3d-model/art/t-45-goshawk-1-26
Thanks, I will take a look. I may have to decide if I want to spend $85 on it, though. That is a substantial amount more than your other models!
Hi, I charge more for orders. But can I give you a discount, $50?
I understand that and appreciate al the work! And, $50 is reasonable I think given the special order. Glad to do that.
Sorry I should have said the value earlier. But I've already changed it to 50.
Purchased thank you!
Thank you, any assistance you need I will be happy to help you.
Thanks, I printed the model and all is great, very nice. Just one thing: the pitot probe that sticks out of the nose. It's quite thin and breaks/brittle when printed at 100%. just wanted to let you know in case you'd want to adjust it to be a little stronger (although not completely to scale).Thanks for making the custom model!
Hi, thanks for your , could you send a picture of the part that needs fixing please? My email is [email protected]
if this is you, then sorry, but it looks like your design
https://www.printables.com/model/1142453-f-15-eagle
Hello, yes it's mine, I was the one who posted it, I'm trying to sell it through the printables website too. I even lowered the price but it didn't sell at all.
Hi, could I get the F15 EAGLE as single solid STL minus the stand?
I'm sorry, my friend, but I'm only selling it separately, ready to print.
Would you ever consider doing a T-45C Goshawk?
Hello, yes I can make this model, but I have to finish two other orders before starting this new one, ok?
https://cults3d.emulatorsite.com/en/3d-model/art/f-18-super-hornet-1-48
I made the change you asked for, didn't you like it?
Oh I did, I haven't bought it because my printer has had some delays
Hello, the T-45 model is ready.
https://cults3d.emulatorsite.com/en/3d-model/art/t-45-goshawk-1-26
This is about your F 15EX EAGLE II 1:44. What weapons are included? To you offer other bomb/ missile packs?
Hello, these are only those that appear in the images.
Hello , do You have a mail address? regards Bertrand
Hello, yes
is
[email protected]
I'm printing your aircraft but ran into abnormal behaviour when I printed the left and right wings. On both wings a large triangular shape disappears as soon as I slice them (Bambu Lab X1C). I haven't figured out how to solve that problem. It is about halve of the outboard slat on both left and right wings.Top side of wing only. I can send you a picture if you send me a link.
Second try to send a message. I'm very interested in your Gripen JAS 39. I liked it a lot except for the missing canards. Are you going to post it again with canards?
Hello, I have already corrected the model, thank you for letting me know.
I call that FAST! :-D
Hello, if you want to follow my page on Instagram, this is the link, thank you very much!
Start the work. It's ok. Thanks 👍
Ok
Hi, I finished the model today, I'll be posting it soon, I reduced the weight on the head part a lot, but I didn't make the pieces too thin to make them easier to glue later, the whole model weighed 15 kilos, using 2% filling, and 2 perimeter with 0.4 mm nozzle. I separated all the parts according to your printer into .3mf files, I will also post all the parts in .stl
When I it I will let you know.Thanks
Thank you very much. Would you like to appear as a signature on the statue's base? Will it be displayed at events with a sonic car? I can also identify you on instagram photos.
Yes, I would, thank you very much.
Hello, I have already ed the file
https://cults3d.emulatorsite.com/en/3d-model/art/sonic-model-1-5-meters
Hello, I didn't have an Instagram for 3D models, I created one. If you can help me spread the word and want to follow, please. Thank you.
Hello, your SONIC model is magnificent. Is it possible to have it in 1.5m high? I print with a bamboo lab X1C. Thanks
Hello, thank you very much, yes it is possible to do it with this measurement, I would have to scale the model to divide it into parts so that it fits in your printer, if you want I can do it at a cost of $89.
Hello, if you want me to make the sonic for your printer let me know. ;)
Thank you for your prompt reply. I'm looking at how much it will cost me in filament. I'll get back to you in a few days.
ok, if the material is too expensive I can give you a discount on the model, have a nice day.
Hi, I'm ok with the pattern, and with a discount it's super nice ;D as it's a big project with lots of bobbin.
Sonic in 1.50 meter cut in pieces of this dimension width: 23,5cm length: 23,5cm height: 25cm. How long will it take for you to finish? Thanks
I looked at the filament and it's huge. It takes about 60kg. Can you model to have the head and chest hollow? Just a few centimeters thick, because the head has a very large unnecessary volume inside. Thanks
Hello, I can make hollow parts of the head, but the chest would be interesting if it were more resistant to the weight of the head, as I need to create a more reinforced structure. I need a few days to make this model as it is necessary to evaluate each piece simulating the print after dividing it to check if it will be good. As soon as you confirm that you want it, I can start the work. Have a good day.
Do you plan on making a F14 as well? It could be great as a GI Joe SkyStriker :)
Hello, yes the F-14 Tomcat is on my list. :)
If you want, I'll let you know when it's available, ok?
Yes please flick me a message when it's available :)
ok ;)
Hello, the F-14 1:48 model is now available!
https://cults3d.emulatorsite.com/en/3d-model/art/f-14-tomcat-1-32
It's cool thanks but I wanted one with separated canopy (to be printed translucent) and movable wings…
https://cults3d.emulatorsite.com/en/3d-model/art/sr-71-blackbird-dougldp
Hi what's the scale on this SR71? :)
Hi, how are you?
The scale is 1:72.
Hello. I purchased your SR72 Darkstar. It is really nice except I am having a problem with the rear section. When I put it into my slicer the left (facing front) vertical stabilizer turns into a ghost and won't print. I am not sure what is wrong. Could it be a problem with the STL? I just got my first FDM printer a Qidi 4 Plus so I am not very familiar with the slicer which is QidiStudio. QIDIStudio is based on BambuStudio by Bambu Lab, Bambu Studio is based on PrusaSlicer by Prusa Research, which is from Slic3r by Alessandro Ranellucci and the RepRap community. Thanks to Bambulab, PrusaSlicer and OrcaSlicer for their contributions to the 3D printing community. Thank you in advance. I will post a make and pictures if can get it printed.
Hello everything is fine? I'll check the file again and try to help you.
Hello, there really was a problem with the left wing, I have already corrected the file, you can it again for free. I apologize for the inconvenience, and thank you for ing me.
Wow that was fast. Thank you. The model is really well done. Merry Christmas. I will post a picture of the finished model.
Ok, I like it when I see photos of the finished models. A happy and blessed Christmas to you too!
Hi, were you able to print the model, did everything go well?
Hello. Yes I printed it. It turned out really nicely. Your file was excellent. I will post a make soon.
Hello, if you want to follow my page on Instagram, this is the link, thank you very much!
Hello. Can I ask you to design a model? I will pay whatever the fee is. My e-mail address in Turkey is [email protected]
Hello, which model do you want?
I couldn't send you an email.
aksungur model
This is a Drone?
Hello, if you want to follow my page on Instagram, this is the link, thank you very much!
Greetings and
I saw that I had the Shadow hedgehog file but I'm looking for it now and it doesn't appear, you'll have it available
Hi, I need to update the model and reinforce some parts, I'll post it again soon and let you know, ok?
Hi, the model is ready now
https://cults3d.emulatorsite.com/en/3d-model/game/shadow-the-hedgehog-dougldp
enjoy!
Hello I bought the C-17 model today but am having some problems printing it. So far the engines have come out looking good. When I try to print the front fuselage there is no detail in it. I tried printing at ,16 and .12 no luck.
Hello, please send a photo to [email protected] so I can help you in the best way possible.