The top prints with a solid bottom sheet that extends out under the hinges. Is this supposed to be broken off (like a )?
- 0 j’aimes
👋 Bonjour à tous ! Ce fil de discussion est public, alors restons gentils et respectueux. Pas de publicité, de spam ou de choses désagréables !
🇺🇸 Pays du membre : États-Unis
🌐 Langue préférée du membre : Anglais. Vous pouvez traduire en ligne via DeepL.
💡 Vous faites référence à un modèle en particulier ? Ajoutez le lien, le titre ou le numéro du modèle.
🖼️ Vous souhaitez publier des photos ? Utilisez un hébergeur gratuit comme ImgBB et collez les liens dans le message.
✍️ Astuces de rédaction : Utilisez le format Markdown pour structurer vos textes et les rendre plus lisible
Écrivez votre message :
8 commentaires
Hello, good day, can your dragon box be for commercial use or only private use?
- 0 j’aimes
Your din dash pocket, is it a print in place? If so how do you set it up to do so?
- 0 j’aimes
I printed it face down with s only for the tabs on the outside.
- 0 j’aimes
Iam a little new to the 3d printing thing. What is face down? How does it actually print the box? I have had trouble printing open box's before.
- 0 j’aimes
This is probably not the place to get printer advice. I don't know what slicer you use or what printer you have and what capabilities it has. I'd suggest you find a forum devoted to your printer on say reddit and then ask the questions there with a link to this print.
In generalities "on it's face" in this instance means having the front face down. This leads the top to be bridged where the filament is draped across the open space between the walls and is difficult, if you don't know your printer well, to determine how best to do this. There are settings which can govern how the bridging is accomplished best , for instance bridging the narrowest side rather than the longest. This involves your slicer and printer. So again, I'd direct you to a forum devoted to your printer or printer brand.
- 0 j’aimes
Thank you, I appreciate any form of help. Thank you again for the time and direction.
- 0 j’aimes
Can you tell me what I’m doing wrong, I just can not get it to work it just makes a mess it doesn’t set temperatures in I have to put it in manually then it jut makes a mess please help
- 0 j’aimes
I'm not sure what you are talking about
- 0 j’aimes
where is the pusher piece for the speedloader?
- 0 j’aimes
added to the stls check again
- 0 j’aimes
Just curious. The fill for the inside of the cover of the Dragon Box, is it supposed to be removed? It is an awesome design, so thank you.
- 0 j’aimes
I don't understand what you mean. If you mean infill, no it is not hollow. If you mean the s for the edge, yes.
- 0 j’aimes
Hi, mounting holes are everytime on every model on the same site. So it is useless for me and also for the others I think, because it is only one part. I dont know now to change the holes.
- 0 j’aimes
Uh, what model are we talking about?
- 0 j’aimes
Hi! We want to lease some of your models. How can I you?