We are a small team creating highly detailed miniatures for 3D printing
For any questions, you can us on Discord: chagarin
👋 Bonjour à tous ! Ce fil de discussion est public, alors restons gentils et respectueux. Pas de publicité, de spam ou de choses désagréables !
🇺🇦 Pays du membre : Ukraine
🌐 Langue préférée du membre : Russe. Vous pouvez traduire en ligne via DeepL.
💡 Vous faites référence à un modèle en particulier ? Ajoutez le lien, le titre ou le numéro du modèle.
🖼️ Vous souhaitez publier des photos ? Utilisez un hébergeur gratuit comme ImgBB et collez les liens dans le message.
✍️ Astuces de rédaction : Utilisez le format Markdown pour structurer vos textes et les rendre plus lisible
Hello, I recently printed Mistress Dominant and Submissive and i just wanted to say your pre ed parts were fantastic. Your settings are awesome & were easy to remove. What were your settings? I would like to duplicate it on other non preed models.
Hi, thanks for the nice review and for the purchase :)
In general - the s were installed manually and for this model it took about 1.5 days.
99% of all s have the following parameters:
Tip diameter - 0.25 mm
Tip length - 1-3 mm
Post diameter - 0.7 mm.
The interval is approximately -0.8-1 mm
The remaining s may have a tip diameter of 0.17 (for very thin parts) or in rare cases - 0.3 - 0.35 mm
If the part is hollow, the s inside have the following parameters:
Tip diameter - 0.75-1mm
Tip diameter (lower cone) - 0.75-1mm
If you use Lychhe, you can set the grid snapping at 3-5mm intervals depending on the size of the part.
I hope this will help you :)
hello I bought your https://cults3d.emulatorsite.com/en/3d-model/naughties/play-with-me-universal-controller-holder and I print most of it up and the parts dont locked in place whats going on and it dont hold my controller maybe u can help?
Hi! It's quite strange. Can you tell me more about what's going on? What details are "locked"? Can I get a screenshot, a photo?
You can us faster in Discord: chagarin
Hello, I am a from China. Your work is great so I would like to cooperate with you. I wonder if you are interested.
Hi, thank you for your nice review. For any questions or suggestions, you can write to us on our personal discord: chagarin
Hi, someone is stealing your models and selling them under their name. I have already reported the matter to the istration. Link to the scammer's channel: https://cults3d.emulatorsite.com/en/s/Dj3Dc/3d-models
https://cults3d.emulatorsite.com/en/3d-model/naughties/sadako-yamamura
Somebody's reposting one of your designs
Thank you very much, done
The dimensions on these files... I'm looking at the hentai files and the sexy nurse collection... The scale in the file photos shows horizontal and vertical measurments... BUT it does NOT say if the files are in inches or centimeters... please let me know which it is. thank you
Hi!
In the photographs (on the ruler) the size is indicated in centimeters. The description of each model also indicates the size in millimeters (except for collections, so as not to cause confusion)
The dimensions on these files... I'm looking at the hentai files and the sexy nurse collection... The scale in the file photos shows horizontal and vertical measurments... BUT it does NOT say if the files are in inches or centimeters... please let me know which it is. thank you
Hello, I bought your sexy phone holder model. I was expecting the models you displayed to appear in it, but only 1 model appeared. You also showed the model with a tied mouth and taped breasts, but it does not appear in the folder. Can you please fix this? I am waiting for your answer. Thank you.
Hi
There are 2 versions of the holder in the store
https://cults3d.emulatorsite.com/:1278515
Cute phone holder. Based on your "s" this is what you purchased, but please check this and let me know if this is not the case. This is a simplified version and it includes only 1 option ( Covered chest and lips in the shape of a kiss)
https://cults3d.emulatorsite.com/:1278465
Sexy phone holder. Where 4 options are included.
The description of each states which variations are included in each version. Also, the renderings show only those versions that are included in these models.
I hope for your understanding
Que tal amigo, tienes algún soporte de celular similar al que vendes, pero con el androide número 18?
Hi
Sorry, but I didn't understand you :(
cell phone of character number 18, dragon ball
Ok, that's understandable :)
But unfortunately we do not accept commissions (we do not make custom models)
Hello! Where can I find the Michael Myers Halloween girl? Have you made it your truth? All the best!
https://cults3d.emulatorsite.com/:2473569
Hi, this is our fanart version :)
boa noite
ja tenho alguns arquivos seu , consegui me mandar eles divididos ,igual esta fazendo agora
Hi
If you bought files from us, and other split versions were not included, then we didn’t make other versions:)
Some of our models are provided in only one split version. All information is in the description for each model
Hello, was wondering if any chance you go do a sexy cat guy series? Tysm for your time
Hello, sorry for the delay in response. Unfortunately we don't do male characters.
Best wishes
https://cults3d.emulatorsite.com/en/3d-model/naughties/figurine-collection-lustful-kitties-3-pieces
do you have any version with more clothes on them?
Hi! Unfortunately, there are no other versions
https://cults3d.emulatorsite.com/en/3d-model/naughties/sexy-bunny-girl-dpoves/comments
Your design was stolen
Yes, i confirm. Someone is selling your models forom Welcome pack at MMF https://cults3d.emulatorsite.com/en/3d-model/naughties/sexy-sweet-nurse
Thank you guys very much for letting me know 🙏
Hello, I want to know if it is possible (apart from the entire figure with the girl) to have the 2 models of scythes in STL without cuts, to make a cosplay for Halloween.
model: https://cults3d.emulatorsite.com/es/modelo-3d/picaro/halloween-reaper-b
Thank you.
Hello. We have already done this and added the files to the current model :)
Best wishes
Okay, so that means that I can separate the scythe from the girl and make a real-life scythe, right? By the way, thank you for the fast response
You don't need to separate it from the girl. We've already done it and added the necessary files, named: "Scythe_a/b.stl". Scythe is separated from the girl. You just need to set the desired scale and cut it in the slicer. And it's possible to cut it in the slicer into the parts you need. The default scale is 1/12.
Okay, thank you very much! I'll buy them tomorrow.
Thank you:) I've also added a screenshot of scythe for your reference
is this a colored model ? I mean , can I print it with a multi color printer like Bambu with AMS ?
Or is it single color and I have to paint it ?
https://cults3d.emulatorsite.com/en/3d-model/naughties/sexy-ghost-b
This model does not have color information. All colors you see in the renderings are for preview purposes and possibly for the paint scheme.
too bad. they are all nice. But I don't have time to paint...
Hey, love your stuff! I haven't seen everything yet... but I'd like to know if I can get this girl.... sitting, like sitting in a 1/16 scale truck. Is that possible?
I'm building a parody 1/16 scale mini dump truck. She'd be perfect as a enger! Cheers!
Hi, unfortunately we don't do commissions
when printing your model Sexy phone holder do you suggest when printing on the flat base or none needed ?
Hi. When printing sexy phone holder - you need to set the by yourself, both FDM and SLA printing.
I will it that compared to the rest of the models, this one represents something completely new. Therefore, I was eager to print it out and paint it. Let's hope it continues to do so.
https://ibb.co/CMJpFQb ; https://ibb.co/jbyQk5Q ; https://ibb.co/GJ5jcvd ; https://ibb.co/Kxfzv5S ; https://ibb.co/YBs4Kys ; https://ibb.co/6DLrdLH ; https://ibb.co/McrCf75
Thanks for your , and sorry for the delay in response.
Hello, I understand I have to have a 3d printer to make this model or find someone to print it for me. However, just curious, how do you get all of the colors? Are there 3d printers that will print it in color? Also, are there 3d printers that can make it in solid metal like silver or gold?
Regards,
Laurent
Hi Laurent.
Yes, you need either a 3D printer or someone to print it for you. We get these colors by rendering in modeling programs, and they are mostly only needed for the paint scheme of the finished model. Our models, as in most cases, the model does not have color information. Coarse colors can be produced easily using FDM printers, some of which can print in multiple colors. SLA prints in only one color, but still provides great model quality and detail.
The only technology we know that can actually print fully in color is SLS, but these are mostly industrial printers and they are prohibitively expensive for ordinary s.
Therefore, we are not currently optimizing our models for this type of printer, as this is quite a big job that will ultimately be needed by very few people.
Also, other SLS printers can print with metal, but this is most likely a specific metal alloy. Printing in silver or gold right away is probably impossible for now :)
Sincerely
напишіть мені
Discord: chagarin
https://www.instagram.com/chagarin.community
can i see others like this?
Honestly, I didn't understand you :)
Hey there! I came across your work on here and I'm really interested in making my own minis/figures. Do you have any tips or a good place to start?
I wrote to you on discord )
i apologize if this is a dumb question but do you have a patreon?
Hi:)
For now there are "Tribes" on MyMiniFactory, it's almost the same. Maybe later we'll make Patreon