11 commentaires

Which parts? The parts I posted or the centaur body from The Maker's Cult (TMC)? Regardless I had a horrible time trying to find the right orientation for printing most of the parts with my FDM printer. I sliced most of the parts 3mm above the build plate (using s) . That way (while orienting the model correctly) I could guarantee that the part would be ed enough that it wouldn't fail. The elbows are really hard to print on FDM and should be oriented vertically (so it's taller than it is wide). Here it is fully printed https://www.reddit.com/r/PrintedWarhammer/comments/17ujff4/warhound_knight/?utm_source=share&utm_medium=web3x&utm_name=web3xcss&utm_term=1&utm_content=share_button
If that didn't answer anything I'll try to help as best I can.

im using a resin printer and have only the head and lance arm the shoulder part that are failing on me the rest of the parts have printed

Ok, I didn't have a resin printer at the time so the files are not optimized for resin printing. To make sure we're talking about the same parts here is the design on Thinigverse with the file names beside a thumbnail of the files. https://www.thingiverse.com/thing:6143952/files I will be using the names from here. The Knights Helmet and Death Mask Head have gaps in between some of the layers that would likely lead to print failures. As for the Lance body there are a lot of holes in the mesh that may make it hard for a resin printer to slice (Same with the Castigator Head). I will update these parts as best I can to improve printing. If I need to update any other parts just tell me their names based on the thingiverse link.

HI this is my first printer so i wasn't sure if i was doing something wrong they have all printed out apart from the Knights helmet and the Lance Body but if you could correct the castigator head either one of those heads whatever is easiest i like the look of them both that would be much appreciated.

Ok, that makes sense. I know you probably already went through all the steps but make sure the exposure time is good with "The Cones of Calibration" https://cults3d.emulatorsite.com/en/3d-model/game/tdc-crocodile-head-re-scale and scale it to 194.48% and it should work I also ed a modified version in the thingiverse post and it will take a couple of days to be updated on cults (I post on Thingiverse and cults3d imports it but the process takes a few days)

Yeah after I posted it I thought that they might have been scratch built by you. Is the warmonger titan set still online or has it been taken down.

I've looked if I could still find it, but it seems to have been lost in one of the past purges. I don't have the file anymore either due to a harddrive failure last year. I'll see about modelling a replacement part and adding it to the zip.

Understood, I think the zip has the original file or at least your remodel of it. I just get a little excited hearing about warhammer models that i didn't know existed. Especially some of the older ones since they seem to be the forbidden tomes of the internet where you're just lucky enough to get a glance of them.

Thanks for responding and sorry if I put you out of your way.

I have linked all of the files that I used in the description. It appears cuirsass 2 was a 3d scan of either a historic piece or a modern recreation. If you want to edit the inquisitor model itself then I could make the tinkercad make public and can share the link so you can edit it. Just tell me which you need and i'll do what i can

Yeah sorry, the Cuirass 2 version of the inquisitor is what I want to mess with. The tinkercad link sounds fun.

https://www.tinkercad.com/things/dnDKqbYYBpL-las-thompson-4661-im-an-inquisitor-see

Hey, so only the Stls for the torso were ed originally since It's meant to be a torso swap for either the
https://cults3d.emulatorsite.com/en/3d-model/game/auric-mechanical-swordsman

you can find the leg and arm stls for the different versions at either of those two links. However, I will add them to the zip to avoid future confusion. Give me a few days.

https://cults3d.emulatorsite.com/en/3d-model/game/even-better-baby-carrier-for-silver-knights-wip these legs will work as well

I tried the new migration option. Where cults takes all of the files from my tinkercad . They said it will take a couple of days before it fully migrates. I will check next Friday on another browser to see if it's working. If not I'll just delete everything and do it manually.

Yes. The added turrets and bits aren't optimized for a less print