Aller au contenu
Z3Dus
@Z3Dus
Compte certifié
Que signifie le symbole « Compte certifié » ?
Compte certifié
Partager ce compte

3D printing allows us to materialize our most secret dreams and wishes into our own reality...

Hi! I´m a student who loves 3D deg of various things and gadgets. Hope you will like some of my design. :)

Thank you for visiting my page, I hope you found what you were looking for!
Happy printing!!!

Some models of mine can be found also here: https://www.printables.com/cs/@Z3Dus_1462502

Populaire Vendeureuse Téléchargement Curateurice Influenceur·euse Designer

👋 Bonjour à tous ! Ce fil de discussion est public, alors restons gentils et respectueux. Pas de publicité, de spam ou de choses désagréables !
🇨🇿 Pays du membre : Tchéquie
🌐 Langue préférée du membre : Anglais. Vous pouvez traduire en ligne via DeepL.
💡 Vous faites référence à un modèle en particulier ? Ajoutez le lien, le titre ou le numéro du modèle.
🖼️ Vous souhaitez publier des photos ? Utilisez un hébergeur gratuit comme ImgBB et collez les liens dans le message.
✍️ Astuces de rédaction : Utilisez le format Markdown pour structurer vos textes et les rendre plus lisible

Écrivez votre message :

8 commentaires

margo3d
margo3d

Hello, first time printing a 3D object here, still learning ! I am trying to print the pingu money. I started with the legs. But the round part on top of the legs is a mess. The filling does not look good. Do you know what % of filling you used ? Any recommandation ? Thank you !

  • 1 j’aime
Z3Dus
Z3Dus

Hello. First of all I want to thank you for ing my design.

I my beginnings when I started 3D printing. I can definitely say that it's a really amazing technology and a cool hobby.

However, about your problem. I don't know exactly where the problem might be I guess I need to see it, so I'll give you some advice I thought of.
I use the same infill on most of my designs, this is no different - 20%. It's also a good idea to see if you have a clean nozzle that is not blocked with material. Or if the extruder is extruding the material well. A well chosen setup is also important.
Getting started is always about some experimentation with setting to see what works best and how.

In my beginnings and sometimes even now, this site helped me a lot:
https://all3dp.com/1/common-3d-printing-problems-troubleshooting-3d-printer-issues/

I wish you soon figure out the problem and 3D printing makes you happy.
sebastien-cool
sebastien-cool

bonjour sa ne fonctionne pas bien vous avait mie votre fichier a jour ou pas depuis
josephinhillsboro
josephinhillsboro

Hello i recently ed your brush cleaner and am having trouble printing the top cover every time i load it into cura to slice for my fdm printer it reads that it has an error and while i did get it to print it did come out with some problems i may be able to make it work but any help or a repaired file for that would be greatly appreciated.
FettLife
FettLife

Hi there!

I really love this idea and have printed this scaled up to 130% . My only problem with the files was the one for the plug. On my FDM printer (Anycubic Mega Pro), it did not print the base for the plug and push button part. I had to print that on my resin printer (Anycubic Photon Mono X) and then it did print for me.

I am having a little trouble with getting the water to feed after flushing the dirty water, but I am working on modifying it to feed. I think the gravity feed area just needs to be able to get a little more air in to dispense better. I am slowly filing areas with my jeweler's files so as to not allow too much air in.

I added a little bit of craft glue, that dries soft and rubbery, to the reservoir and base to help make it more stable as I have been spilling water when it rocks. I also added a bit of that rubbery craft glue to form a seal around the plug to help prevent leaks. The push button part sticks slightly so I will try to see if I can get that addressed with my next attempt to print a second project. I'm still working on the modifications but will post photos once I get it working the way I need it to. So far, I got it to seal around the drain and the reservoir sits slightly tighter. It is totally usable.

I mistakenly did not add s when I printed to top for the catch tank, but surprisingly enough, it still printed, though with strings on the inside which I just cut off and sealed up with UV resin. That was totally my mistake when slicing the file.

I may try printing a version completely on my resin printer some time!

All in all, a great idea and definitely usable! Thank you for this gadget! Just needs a few tweaks here and there and it will be perfect! Keep up the with great ideas and creating them!

  • 1 j’aime
Z3Dus
Z3Dus

Hello! Thank you very much for sharing your building process and !

I know the design isn't perfect and I'm working on it, so is greatly appreciated. If you decide to share your progress and photos, I am definitely looking forward to it. :D

Thanks!
gavamatteo
gavamatteo

Hi! I'm interested in your Brush rinse cleaner, but Cults, as usual, doesn't show pictures and videos, so I don't really understand how it is composed: is the clear water container printable? Can any plastic soda bottle (like coke) with a screw cap be used instead? Thanks a lot!

Z3Dus
Z3Dus

Hello.

Thank you for your interest.

Yes, Cults is little bit slow nowadays :D.

Back to your question. Yes, everything is printable, even the clear water container. So, you do not have to use plastic bottles. The clear water container is not extra secured. It is simply inserted into the top cover. Well, there is no place for screw of bottle and also diameter of a bottle is different. So, it would not work.

Hope I answered your questions.
Thanks, have a nice day! :)

gavamatteo
gavamatteo

Ok, thanks a lot! What kind of material did you use for the bottle, which I see is slightly transparent? Resin? Filament? What product exactly (brand and model)?

Z3Dus
Z3Dus

The bottle is printed with common PLA. (PLA-nature, PI-3004, 1.75mm, printIT) I used a natural colour that is a little transparent so you can see how much water is in the bottle.
jjtirode
jjtirode

Bonsoir,
je viens de réaliser ce model mais dans la description il est dit qu'il y a 5 modèle, or, je n'en ai que 4 : bottle, plug, réservoir et top? Que manque t-il et, il il a un problème d'étencheîté entre la "bottle" et le "top". Merci de votre réponse

Z3Dus
Z3Dus

Hello.
Thank you, for your and .

There are really 4 parts of the model. Nothing is missing. it was my mistake in the description. So, thank you again.

I don't really understand the problem with tightness or leaking between "bottle" and "top". Would you be so kind and send me an email ([email protected]) with more details and a photo?

Thank you. Have a nice day!
velazquez195423
velazquez195423

COMPRE TU DISEÑO DELLIMPIADOR DE PINCELES Y NO SIRVE CORRIGELO PORFAVOR.

Z3Dus
Z3Dus

Hello. I am very sorry, that you are not satisfied. Could you describe to me where the problem is? Thank you.
ayi
ayi

buenas, te consulto por el limpiador de pinceles, el deposito solo va apoyado sobre la tapa del deposito? cual es la función del conito partido q queda en el interior? o me falta algo q no haga q el agua se valla sola ?

Z3Dus
Z3Dus

Hello. Sorry, I don't speak Spanish. I apologize if I do not answer some question. But I will try my best with google translator.

Testing showed that the water stops draining from the reservoir sometimes. So, I put there the cone that prevents this problem.
The reservoir in not extra secured. It is simply inserted into the top cover.