130 commentaires

Heollo. Thank you very much. I am very glad you liked it. This problem is unfortunately experienced in many models. As a solution, pouring some liquid glue on the inner walls of the magazine slot solves the problem in pistols. It will probably work in rifles too. There is another solution. The magazine can be scaled 100:0.5 large. but glue always gives good results

Hello. They do not have any scale. I usually reduce them to the maximum size according to the spring dimensions I use. Usually, those who buy them set the scale to 1:6 with the slicing program.

Merhaba kardeşim. Eğer ürün üretip satarsan herhangi bir sorun olmaz. Üretim lisansı ile ilgili bir sorun yaşamazsın. Projeler ile ilgili bir sorun yaşarsan 7/24 yardımcı olurum

Çok teşekkür ederim, ayrıca anahtarlık boyutunda modelleriniz olursa kesinlikle alacağımdan emin olabilirsiniz

Hello. This is really a good model. But after talking to you, I had some time problems. I will definitely do this project. I promise.

Hello. I have a few projects left unfinished. I will deal with them after they are finished. We will be in touch.

Awesome thank you!

Your welcome

Hello. Thank you for your interest. The product does not have any shooting feature. It is only decorative.

Hahaha, ah yes, i realise that, thank you, and apologies for not making my question clearer, i just wondered if you based it on a weapon that existed ? like a Springfield, or Brown Bess, something like that ? as i could then check up its full size dimensions and scale it up, if you see what i mean ?

I'm so sorry. I'm ashamed of myself right now :D I took many different models as examples while drawing the project. It turned out to be a complete hybrid :)

No need to be ashamed mate ! its an interesting project in its own right! Thanks for letting me know :-)

You're welcome. Thank you. I hope you like it. If you have any problems or suggestions, I will be here 24/7 to help.

Cheers Fella :-)

Hola, amigo. Misión entendida. Haré lo mejor que pueda. Si puedo hacerlo, nos pondremos en o, lo prometo.

okok amigo avisas porfa

Hello. You can reach me from the Facebook address whose link is in my profile.

The Facebook link isn't working for me. I am located in the USA. This is what I get when I click on the FB link.

This content isn't available right now
When this happens, it's usually because the owner only shared it with a small group of people, changed who can see it or it's been deleted.

Hello. I recommend you print in landscape orientation. If you also increase the infill density and print quality, the problem will be solved. If the problem persists, please me.

I tried increasing infill to 100% and print quality to .16 the s leave a horrible finish as I am printing with sights down. And when I go to remove the receiver off the plate, they usually break off stuck to the plate.

If you print with these settings, you will definitely get good results. If it doesn't help, I will send you the print files directly.
You can get good results with tree and radial base.
Material PLA.
Nozzle 200 degrees.
Table 60-50 degrees.
Layer height: 0.2 mm
Wall thickness: 0.8mm
Speed: 50 mm/s
Standart kalite.

Will give it another try and let you know how it goes. Thanks

I dont see a wall thickness in my Bambu Lab Studio Software

I am still have issues... when I print the reciever upside down on the sights, The sights come off when I take it off the plate. Also when I print the body of the gun with the rails down... the rails come off on the plate when I go to separate it from the plate...can you tell me what am I doing wrong?

I just checked it out. It's a really nice model. It's not in my inventory but I can make it if you want.

I would really like that… if not too expensive… retired FDNY here. Lol

I am very sorry for this information. I am waiting for your good news. I hope this problem will not occur in the "Springfield" model.

Hello. I have recently turned to such projects. This project is a good recommendation. I will take a look at it today. I think I can do it. Is there a rail size you want?

Unfortunately, I don't have any information about resin printers. That's why I can't come up with an idea. Sorry.

the idea of making a design of the track links separately to assemble them later is not possible or?

Hello. Thank you very much for your interest. Sorry for my late response. They produced most of my irons as 1:1. They shared some photos and videos with me. I will share them with you. I can help you with the measurements. Best regards, Emre

Hello. How are you?
I produce miniature products because my printer cannot print 1:1. However, most of the customers who buy my products enlarge my designs and produce them in 1:1 scale.

Hello brother. Thank you for your kind warning. I am ing it right away. I apologize for this inconvenience.

Thank you so much sir

As I said at the beginning, I don't really know about resin printers. But I'm trying to do something for you. I loaded the file named "resin tank track" into the bulldozer file. Try it. If it doesn't work, I'll rearrange the dimensions.

when printing the tank leaks the nails are together and do not rotate as they should in fact when trying to separate them to wrap them in the wheels they break.

The pallets are not suitable for resin. If I knew the resin printing system, it would be more helpful.

well, layer by layer it is just a whole layer each time the part is dipped in the resin and that makes the parts move in one single impression is disastrous.

Resin printers need to develop more. I watched a few videos about resin printing. The logic of operation is unnecessarily complicated. I wish humans had stopped after discovering fire. I said after watching it.

yes i bought it because to make high detail prints of a part they are “better” but for artivula parts and even small ones they are a headache anyway, is there anything i can do?

The only problem I have is with the orgas, since I have to print all the right slavons, they don't articulate as they should.

I don't know the resin printer system. If you have a suggestion about tank pallet dimensions, let's apply it. Since I don't know resin printers, I don't have any advice on this subject. I did my best but it didn't work.

Hello, your nice comment made me very happy. But PayPal is banned in my country. If you have problems with payment, you can buy from my other pages.

Hello. I'm so glad you liked the models. Thank you. Great idea. I have unfinished projects. Then the first thing to do is AA12. I'll let you know when I finish it.

Yakında envantere ekleyeceğim

Aldım teşekkür ederim

Rica ederim

I am sorry that there is a problem with the pallets in resin printers. Let's look at the situation. As you said, we produce them one by one.

thax

Hello, thank you very much. I don't know anything about the license. If you have a suggestion, we can agree.