28 commentaires

Review of the model has found multiple issues. Fixes will be rolled out shortly. All who have ed should standby for new notifications.

you would need either the .blend files or an .obj with the textures baked in. Try searching google for the model your looking for tagged with "rigged"

Yes, I do apologize, that model is currently under reconstruction . It seems to work for some people and not for others. I personally have had success printing it by using Chitubox. Refund has been sent.

4 individuals? 4 more characters?

Well I Got my license to fusion 360, "fixed" the issues the model had, It still only prints part of the legs and the Leku. I'm gonna need that money back. Based on the other comments you have here, that's a very common issue with all of your models. You gotta do better.

Refund on its way.

Of course there are non manifold elements. There are many many pieces of geometry that do not connect to other faces. Nearly every slicer out there will flag it, or attempt to "repair." Do not repair it with the slicer, most likely it will cause more issues. There are many "NME" However the geometry intersects with nearby walls that will them. I have printed this model more than 10 times successfully, all around 7 inches tall. There's no need to play around in fusion 360. Within your slicer ensure any option referring to "Print floating geometry" or "Print thin walls" or "Print non manifold elements" is checked. I'll have another look at the model anyway. Thanks for the heads up.

Hey there! Ive actually printed this with an FDM successfully before. Even using Cura, it may say the model is broken, its only refering to a few unattached polygons around the hair. If you can get it to slice im sure it will print.

Sounds good, I'll see what I can do. Thank you for responding. It looks as tho the majority of the poly issues are in her face itself on my end. If you dont hear back from me, it went well. :)

Hmm, this must be due to the amount of clothing removed causing the gap to form. I'll give it a look and roll out the fix soon after. Thank you for bringing it to my attention.

Not sure if that's the issue. Her back is straight standing upwards in only the nude version

Oh! I know exactly what the issue is. Hrmmm.. thought i fixed that already. Ill update it with the correct version.

Cela semble être un problème qui vous est propre. Je ne peux pas vous aider avec votre capacité à télécharger. Je suis capable de télécharger de mon côté.

Strange, my prints have all came out perfect. what scale are you printing at? Ill try to have a look on my end.

Let me try reprinting, might actually be a mistake on my end. Thought I was getting some leeching from the inside of the model but it might just be really stubborn resin under the armor pieces

Got it to work. Wanted to post a make of the two but site won't let me for some reason. Thought I would update you

Also, on the Panem model of Katniss, I cant hollow out the model correctly and add holes because there are multiple layers overlapping. There needs to only be a single outer layer...

Of Course! The Panam Flashing and Hermione Reading Models have just been updated, You all should now receive a notification to the latest versions. However, I am unsure which model you are referring to when you say "Panam model of Katniss"

Perfect! The models are now fixed! Thank you for the quick response and solution!

Absolutely! Anything specific?

Just some different sexy poses of her by herself. That would be awesome!

any progress on ahsoka in various sexy poses? would love to see what you come up with!

Check out the newest ahsoka model here! More are in the works. https://cults3d.emulatorsite.com/en/3d-model/naughties/ahsoka-battle-ready

Im not finding any errors during slicing, They're successful in Cura, Chitu-box and FlashPrint. You may have to be much more specific

Yes, just the nipples? or areolas as well? and how much bigger?

yes and yes and no that all

Which model specifically?

The hair problem is known and the fix is rolling out slowly. All models will be updated, it only takes time. Everyone who ed the model will get a notification of the update when it occurs

Done! updates should be available for

Aprox. half of the Hermione models have been updated to feature better hair so far. Updates will be sent out when the model updates.

Pouvez-vous être plus descriptif avec le problème ? y a-t-il des erreurs qui s'affichent, ou la STL ne se charge-t-elle même pas dans votre slicer ? J'utilise Chitubox ainsi que Cura, ils sont tous les deux capables d'imprimer ce modèle.

Yes I am planning on updating it here soon. Everyone will get the new version.

which slicer are you using? I am able to slice and print using Cura

Yes, I was able to fix her hair issue by ensuring "print thin walls" was checked, as well as "Keep disconnected faces" Then depending on the scale of your print, enabling "horizontal wall expansion" and increasing it by .1 mm increments. I was able to get a test low quality test print.

I tried putting those settings in and it doesnt seem to have changed the model at all in cura. Will it still print correctly or should it be showing up correctly in cura?

It should always look good in the print view in cura. Ill render a custom hair model for her and send you the new file. Please send an email to [email protected]