73 commentaires

Send me an email with what you want and i'll see what i can do [email protected]

Thank you!

Thank you so much for bringing this to my attention. Bambu slicer did not see this or repaired it automatically, anyway i found the problems, fixed the files and re-ed them. Front1 however seems to be very broken, though Bambu still prints it fine, it does also say that it had non-manifold edges. So i have made a completely new one from scratch. Please let me know if these work out for you.

That's great, thank you so much for taking a look so quickly. I'll have a go but that's good to know it prints well for you so it should be fine.

I bought the Geth set. I'd like a refund. The actual file is just as bad as the pretend viewer made it look...

Done, might take some time before its processed.

No problem, that one comes with 4 headsculpts which one would you like? looking right or left with or without glasses. let me know and i'll add it to the .

Looking right without glasses. Thank you so much!

I just ed a complete single-body version, looking right without glasses.

You’re the best, thank you so much!

Please keep me informed on the progress, and if you need any help don´t hesitate to ask. [email protected]

Absolutely will, thank you!

All mass effect minis except for the companion packs come with and without bases, send me an email for bulk. [email protected]

I have Re-ed the baf leg parts and numbered them the same as the hawkeye leg. It should be all there now, again i am very sorry, i should have double checked if everything was there.

I am so sorry. I don't know why, but for some reason i messed up ing all the files. Just added the 3rd leg piece.

just added the neck piece, I indeed forgot to it. As for the rear the hawkeye is 61% rescale of the baf. Reducing the Baf rear would make the connector too big. I can make 10% a bigger rear end for the hawk eye if you want thought.

Kind regards Tronic3100

I would appreciate that thank you Ron

I ed the hawkeye rear. I realised i forgot that file too, sorry i misunderstood and thought you wanted something bigger :) Regards, Tronic3100

Don't suppose you've considered making a squad of Alliance soldiers in there mass effect 3 armour. As far as I can tell no-else has done it.

Thank you for your kind words, first up are some other less-represented races. Than I might do the Alliance in the me3 armour.

Ooh... I hope that means STG! Fingers crossed 🤞

To me it looks like its there, but i re-ed it just in case.

sorry it says bottom nut its a full figure not the bottom half of the split thanks

Again I see no problems but i re-ed the full figure just in case, if you still have problems please me via [email protected]

Hello, I have been meaning to get back to making more mass effect mini's.

You definitely should!! It’s incredible work! Like I said, your TTS minis inspired me to make a ground-up Mass Effect war-game! I only wish certain armies were more readily available to purchase and build 😅

If you ever get around to more of them Id love to chat more about what armies you’re making and what use you intended them for.

Hello you can send me an email [email protected]

Sorry, I can't do that the 3d model belongs to @AlbertoASP and i can not give you or sell you any digital copies of his work or adaptations from his work. You will have to ask @AlbertoASP if you can have my adaptation of the sentinel head.

I gave the maker my alterations and the new peg sizes are now included in @AlbertoASP's version https://cults3d.emulatorsite.com/en/3d-model/game/sentinel-head

Hello Rico1392, Sorry I don't sell physical copies of my models I only sell the files so you can print them yourself.

Hello, It depends on the material, amount of infill, wall thickness, size, type of you use print. Mine is 230 gram after printing and removing the s.

Hello, please send me an email with more details and maybe pictures of the failed print. Use the ✉ on my profile.

Hello again, I finally figured out how to print things better! I'm quite a printing newbie but having a much better time now. Appreciate the offer but I was having issues with several things so assumed correctly it was an issue on my end. I left a message on the page for the box and saw you replied but, when I went to check, it was gone. Hope all is well, just trying to give a little , meant no harm, cheers!

Hello, thank you for your kind words. There are plans for a Salarian special task group squad, however at the moment I can't say how long it will be before I will start on that. If you have any suggestions or ideas for it feel free to send me an email.

Hello B277,
what you are able to print with your fdm printer really depends on the capabilities of your printer. Some fdm printers can print on a layer height and nozzle with small enough to print miniatures.

My figures classified as Statues are optimized for both fdm and sla printing. I made the details deep and cut them so its good for a fdm printer. Those models are all tested on my Anycubic i3 Mega with a layer height of 0.15 and a 4mm nozzle. They all have a picture of best print orientation and placement.

My figures classified as Miniatures for tabletop games are not optimized for fdm printing.

Hello Primaris, No i don't have any plans for making those. There are already alot of great ones for free on sites like thingiverse.

Hello, I have ed the model in STL format. It should work in Lychee.

Hello Wulen, All statues are to 6 inch Scale, all miniature packs of the statues are 28mm Scale and all Miniature squad packs are 32mm Scale. I say Scale because a krogan is bigger than a human etc. The mini packs of the statues are smaller because I rescaled them with a dnd type game in mind. Print those at 115% if you want them to match the other mini´s.

I'm thinking of buying the models separately, that's what I meant, for example, if the model I from Wrex, without touching anything, will be the same size as Liara, 6 inch both?

https://cults3d.emulatorsite.com/en/3d-model/art/mass-effect-urdnot-wrex-statue
AND
https://cults3d.emulatorsite.com/en/3d-model/art/mass-effect-liara-t-soni-statue

Yes, they would both be "6 inch scale". Wrex is about 25cm and Liara about 21cm.

Привет. На данный момент большинство моих моделей также есть на cg-traders.

Hello Reece2, thank you ☺.
I don't have any concrete plans for those characters, i might make them in the fututre. Currently i am working on Elcors for the gaming Mini's but i do want a break from that. So I am going to make the Standard Shepards as a 2 pack in december/januari.