Hey there, I'm Garrett an American Designer & Maker who loves making things!
👋 Bonjour à tous ! Ce fil de discussion est public, alors restons gentils et respectueux. Pas de publicité, de spam ou de choses désagréables !
🇺🇸 Pays du membre : États-Unis
🌐 Langue préférée du membre : Anglais. Vous pouvez traduire en ligne via DeepL.
💡 Vous faites référence à un modèle en particulier ? Ajoutez le lien, le titre ou le numéro du modèle.
🖼️ Vous souhaitez publier des photos ? Utilisez un hébergeur gratuit comme ImgBB et collez les liens dans le message.
✍️ Astuces de rédaction : Utilisez le format Markdown pour structurer vos textes et les rendre plus lisible
evening, is it possible to resize this ring for a larger diameter?
is there a charge for this? if so what would it be?
https://cults3d.emulatorsite.com/en/3d-model/jewelry/primal-unisex-ring
cheers.
You're jewelry is amazing
any s involved in this ring design ? thank you .
The Gastropnir, Primal Male Ring & and the Modern Ring require s. The Primal Female ring can print with no s but will get best results with s.
Hi Patmerry, I carefully sanded the model with 120 sand paper to get "grain" direction and in the case of the primal female ring, I used a sand blazer to etch the metal pattern into it. As for colour I use Tempera Powder paints with a sponge brush the get the correct finish.
Hi there, I love your designs. How did you get that metal looking finish? It'd be awesome to be able to get the same finish. Thanks. Matt
Hi Patmerry, I carefully sanded the model with 120 sand paper to get "grain" direction and in the case of the primal female ring, I used a sand blazer to etch the metal pattern into it. As for colour I use Tempera Powder paints with a sponge brush the get the correct finish.
Hi Lucas, I'm terribly sorry for the late reply but to answer your question I use black ABS filament from XYZ printing with a layer height of 0.12mm. After print, I give each ring a quick smooth over with 80 grit sandpaper then finish it off with 120 sandpaper. This gives it a more rugged look and feel. For more elegant prints I use a homemade acetone bath to give a print a clean and shiny appearance.
Hi, I'm Lucas. I really liked your rings and the photos are incredible. I would like to know what material you used to print them and the layer height.
Are there multiple sizes in this ring stl?
https://cults3d.emulatorsite.com/en/3d-model/jewelry/primal-unisex-ring