Hello, would you be able to turn the Armored All Might 3D model into a 2d Model that can be used as a template to make a cosplay? Design: 2936591
- 0 j’aimes
👋 Bonjour à tous ! Ce fil de discussion est public, alors restons gentils et respectueux. Pas de publicité, de spam ou de choses désagréables !
🇹🇭 Pays du membre : Thaïlande
🌐 Langue préférée du membre : Anglais. Vous pouvez traduire en ligne via DeepL.
💡 Vous faites référence à un modèle en particulier ? Ajoutez le lien, le titre ou le numéro du modèle.
🖼️ Vous souhaitez publier des photos ? Utilisez un hébergeur gratuit comme ImgBB et collez les liens dans le message.
✍️ Astuces de rédaction : Utilisez le format Markdown pour structurer vos textes et les rendre plus lisible
Écrivez votre message :
26 commentaires
I dont understand 2d model for cosplay
- 0 j’aimes
Hi again! So my son wants to create a Cosplay Costume for Armored All Might. With your 3d model (Design: 293659) I wanted to see if you were able to turn it into a 2D pattern that I can use as a template to re-create the costume. Here is a general example from YouTube on what I am asking for - https://www.youtube.com/watch?v=wRBk9npIevQ - I am happy to pay for it so I dont have to create the template/Stencil on my own!
- 0 j’aimes
I dont sure but I see in youtube can make in blender you can buy in my shop at c g tarder >> https://linktr.ee/sithtigun
- 0 j’aimes
I think make in file .blend better .stl
- 0 j’aimes
can you model using for pepakura or foam ?
i mean the king kuwagata ohger
- 0 j’aimes
I dont sure.
- 0 j’aimes
I bought the model “Goku ssj3 daima” but it cannot be printed because the legs are hollow, and the walls are less than 1mm thick. Same for other pieces of the model. I want a refund. It is a very poor model
- 0 j’aimes
Sorry, I have already refunded the money.
- 0 j’aimes
He comprado el archivo de vegeta ssj3 y el archivo es defectuoso, está inacabado, solicito el reembolso, anteriormente compré a Majin kuu y pasó lo mismo pero no dige nada pero ya no puedo más, solicito reembolso
- 0 j’aimes
Yes
- 0 j’aimes
Bonjour,
Je serais intéressé pour le modèle du franky. Je voulais savoir si ce modèle étais adapté pour le fdm multi couleur via Bambulab et en en plusieurs partie emboitables.
Vous remerciant pour votre réponse.
Cordialement
- 0 j’aimes
Dont sure
- 0 j’aimes
Hello, I also bought the Rin Itoshi model but the chest area is not printing at all. I would appreciate your assistance in this manner. Thank you.
- 0 j’aimes
Thanks
- 0 j’aimes
Hello, I bought the Rin Itoshi model but when trying to print in bambu studio, the body is hollo w and does anot have a printing volume. Also when opened it opened super tiny in size, I had to up-scale it. Can you help please? Thanks!
- 0 j’aimes
I cannot print it in any way. Provided STL file is unprintable with Bambu Studio.
- 0 j’aimes
Re ready you can test again.
- 1 j’aime
I will test it, Thanks!
- 0 j’aimes
It is looking better, the only problem is still gives the error "non-manifold edges" and when slicing it says mesh may have error for an empty layer. Can you take a look in bambu studio?
- 0 j’aimes
Exact error after slicing:
Warning:
Object can't be printed for empty layer between
67.4 and 68.6.
Object: Bluelock_Rin-2.stl
Maybe parts of the object at these height are
too thin, or the object has faulty mesh
- 0 j’aimes
If you can make a multi part objects to print in multiple colors faster, would be great too! :) Torso, Short, Arms, Legs and Head separated would be excellent! Thank you!
- 0 j’aimes
Tried to print but because of the model in one piece but merged together it makes a lot of waste in s, when trying to separate in bambu, the model get some holes. I would like to get a refund please, it is causing a lot of trouble to just print when it should be easier as a pre-made model. Thank you!
- 0 j’aimes
Any chance in the near future you can turn the MMPR Movie Red Ranger file into a suit that can be printed for cosplay ?
- 0 j’aimes
File
2077738
- 0 j’aimes
I'm not sure. I think you need some scalability skills, and I recommend buying them on another website. I have a .blend .fbx file to edit.
- 0 j’aimes
Hello, I would like to request a refund for my purchase of the Taro Sakamoto model. Unfortunately, the file is unprintable due to the model's thin structure and hollow interior. Additionally, the figure cannot be assembled after printing, as the legs and torso pieces do not fit together properly. It is also not possible to print the parts separately in advance to resolve this issue.
- 0 j’aimes
Thanks for mentioning the issue, but after this, there will be a new rework taro sakamoto. It won't take long. When it's done, I'll let you know again.
- 1 j’aime
Thanks for a solution that allows printing, though a detachable apron will be appreciated in the future as the necessity of printing s for Sakamoto's flying top makes the print 50% longer. Still, I am very happy. ☺️
- 1 j’aime
cape on broly won't print
- 0 j’aimes
I purchased broly do you have stl of him colored?
- 0 j’aimes
STL files used for 3D printing are not colored.
- 0 j’aimes
Ok the 3mf file for color
- 1 j’aime
Okay, I'm gonna study it first, not sure if the program can do it, and it's my new knowledge.
- 0 j’aimes
It’s the color files Bambu uses so I can print in color.
- 0 j’aimes
I purchased broly do you have stl of him colored?
- 0 j’aimes
Hello!
I just bought the Momo Ayase pack and there's no FBX or Blend file in it-
I was wondering if I could get those, please.
Thanks!
- 1 j’aime
If you want . Blend. Fbx, you have to buy on another website because cults website only Stl. file Thank you.
- 0 j’aimes
how much for the whole dandadan pack ?
- 1 j’aime
You are welcome to choose any model you like, as I have many available. However, please note that the cults are STL files; for other file types, I recommend checking other websites, as I have listed several.
- 0 j’aimes
okey thanks
- 0 j’aimes
Buenas, lo primero, nos gusta mucho tus diseños, están muy guapos, somos de una pequeño tienda en etsy (asturdream3d) que nos dedicamos a vender figuras impresas en 3d, y nos gastaría adquirir algunos modelos suyos, pero primero queremos pedir su permiso para poder anunciarlos, obviamente poniendo su nombre y la dirección de cults en el anuncio
- 0 j’aimes
Sorry English please.
- 1 j’aime
Sorry, hello, first of all, we really like your designs, they are very pretty and very well designed, we are from a small shop on Etsy (asturdream3d) that sells 3D printed figures, we would like to buy some of your models, but first we want to know if we have your permission to them, obviously putting your name and the address of cults in the ad, thank you and greetings.
- 0 j’aimes
Is it going to sell the printed model?
- 0 j’aimes
yes
- 0 j’aimes
Ah, okay, but can you send me a photo after you print it?
- 0 j’aimes
And please indicate that if you want the file to print it yourself, put my credit on it. Like this?
- 0 j’aimes
Yes, we will send you a photo of the figures that we print and paint so that you can see them, and of course the name of the designer and the address of the cults page will be included in the announcement
Thank you very much
- 1 j’aime
A question, do the Dandadan character models come in one piece or are they in several? Because what we would like is for them to come in several parts so that we can send them disassembled and make them safer during shipment.
- 0 j’aimes
ok, thanks
- 0 j’aimes
When I import the model for printing for the cat the surface isnt smooth but rather polygony with not a high enough count and isn't what I wanted for printing and processing. The surface should be smoother. Can you fix this and the smoothed out version.
- 0 j’aimes
Which character did you buy?
- 0 j’aimes
The dandandan turbo granny cat
- 0 j’aimes
Hi, I would like to request a refund on the purchase of Okarun since the file is unprintable due to a lack of pieces (it has no neck, the hands stick out in the void, the head is suspended, the lower part is not attached to the upper part of the dress) in addition to obvious errors on both the face and the dress (the face has a step between the front and back of the face) not to mention the fact that the figure is empty so even if you wanted to it is unthinkable to be able to put the pieces together since for example between the head and shoulders there is a void.
- 0 j’aimes
Good day, thank you for reaching out. I am not aware of any refund issues, as I have not been notified of any problems with this model. However, I would recommend that you our site for further assistance. Thank you.
- 0 j’aimes
You have ed the Laios file.
I realized after I bought it that the file with the rigging has to be purchased elsewhere. In this case, is it possible to get the blender or fbx file for an extra fee?
- 0 j’aimes
Ah, in website cult, only the StL file is allowed to be sold.
- 0 j’aimes
if you want other file please go to https://www.cgtrader.com/designers/summerforce
- 0 j’aimes
Thank you for your quick response.
I will you on the website you mentioned.
- 0 j’aimes
Okay, we still have a lot of models to choose from.
- 0 j’aimes
are the megaman x models are able to be posed in blender?
- 0 j’aimes
If you want something that can move, buy it at other websites.
- 0 j’aimes
so if i them from cgtrader then i can use blender to put it in a pose and print it out in the pose i want?
- 0 j’aimes
yes
- 0 j’aimes
I have X armor x1-x6 ^^
- 0 j’aimes
okay awesome. i'll buy the file from you on cgtrader then. Thank you!
- 0 j’aimes
Hello I hope all is well, I bought three models from you in bulk, Momo Ayase - Dandadan , Okarun - Dandadan, and Turbo Granny - Dandadan and read that it was rigged in the description (All of our jobs are already rigging and you can customize them to your liking.) , but when I got the file it wasn't rigged and I bought them specifically for animation. Is it possible for me to get a refund to buy the .blend file from render hub. The order number is 104558166, Thank you!
- 0 j’aimes
Thank you for ing me. The website Cults is only for 3D printing if you want it for animation. You have to buy from another website that is more expensive.
- 0 j’aimes
Hello,
Thank you very much for your response. I understand that Cults3D primarily caters to 3D printing models, but the description for your models stated, "All of our jobs are already rigging and you can customize them to your liking," which implied the models were rigged. This was a factor in my decision to purchase them. Since the files are not rigged as d, I kindly request a refund as this will allow me to purchase the correct format from another platform like renderhub that aligns with my needs for rigging. Thank you for your understanding and for your reply, and I hope we can reach a resolution.
- 0 j’aimes
You go in to the ... https://www.cgtrader.com/designers/summerforce
- 0 j’aimes
In this website, I can send you additional files with additional payment.
- 0 j’aimes
I purchased the Okarun Dandadan model and I was wondering if there's a rigged version for editing
- 0 j’aimes
Sorry, you can't .blend files on this website because it's against the rules for 3D printing.
If you want the file to edit, you can buy it from another website.
- 0 j’aimes
hello i have bought some delicious in dungeon figures and dandadan figures, i wanted to ask permission to sale 3dprinted and painted figures on my shop for Halloween and Christmas, i will give artistic credit to you and push youre Cults3D shop.
- 0 j’aimes
Can you send me a picture of the after-painting? I'll put it in the model page.
- 0 j’aimes
yes of Corse i will send my finished works as soon as its done
- 0 j’aimes
bonjour, avez-vous modifié Haruka Sakura - WIND BREAKER ? car j ai peur que vous l avez juste remis car je l avais mal noté.
- 0 j’aimes
sorry english please.
- 0 j’aimes
hello, have you modified Haruka Sakura - WIND BREAKER? because I'm afraid you just put it back because I wrote it down wrong.
- 0 j’aimes
What did you write wrong?
- 0 j’aimes
because I misjudged it, sorry for the translation error
- 0 j’aimes
car je suis désolé mais le modèle que qui était mis en ligne était inexploitable sur le slicer.
il y avait beaucoup d'artefacts invisibles qui apparaissait à la découpe.
et de plus la figurine est creuse.
- 0 j’aimes
so I bought this model from you but I can't do anything with it.
It's a shame because I saw that you had released a new model in the series.
I will be very tempted, I don't want to be fooled.
- 0 j’aimes
Thanks for the , but I'm following the modeling principle and no one has ever had any problems. If you think you're going to get fooled, that's fine.
- 0 j’aimes
I've designed nearly 500 Anime models in cgtrader and I've hired nearly 100 jobs. I'm not going to be fooling around with a bad name.
- 0 j’aimes
I was the only one to buy this figurine from you.
and the base figures are not hollow I'm sorry.
so if I understand correctly you republished it because it had a bad evaluation....
take your figurine toss it in a slicer and you will see for yourself.
- 0 j’aimes
It's not because you hire people that the job is well done, I'm sorry....
we have the reputation we deserve my dear sir...
- 0 j’aimes
It's okay. No problem.
- 0 j’aimes
Hello, the 3D model I just bought from you is empty.
Is this normal?
- 0 j’aimes
No have stl and obj file.
- 0 j’aimes
Good morning, the file “Bluelock_Nagi.stl” that I received seems to have a problem. When importing the file into the “Anycubic Slicer Next” application the following error is displayed: “Error 9322-non manifold edges. (Repair?) ” and the repair option is suggested. Also, when I import the “Bluelock_Nagi.stl” file into the TinkerCAD application, the import takes a long time and, once imported, I can't manipulate the part, the application apparently crashes. By the way, shouldn't the “Bluelock_Nagi.obj” file be the same as “Bluelock_Nagi.stl”? The “Bluelock_Nagi.obj” file received is a Blouse and not the Nagi.
Seishiro Nagi - Blue Lock
Link: https://cults3d.emulatorsite.com/en/3d-model/art/seishiro-nagi-blue-lock
Thank you very much.
Wilson
I will check it for you, but anyway, the file can be used without any problems.