50 commentaires

Hi Esmeriusco, will add the no-pillar version soon, thank you for asking!

Version ed, enjoy!

Hi there, thanks for asking, will take a look at the model and see what i can do for you, keep you updated here 👍

Btw the pictures you see are resin printed, just scaled down to 50/60 % to fit the build volume

Hi, i want it at 100% or bigger.

Hi, do you found the model? Thx

Ive updated the file with multi parts, enjoy!

Hello, I have reviewed the figure, but with those partitions it still has the same size problem to make it in resin. Couldn't Jessica's piano be separated? Thank you and greetings.

Hello, which restriction you’re talking about?

Hi there, here you are https://amzn.eu/d/4YCzEGd i guess you can use any charging cable with that form factor.

Thanks a lot! Will try that one then to be on the safe sie.

Noticed too late that those were not the magnetic plugs required for such a charging stand. If you don't have a recommendation, I may have to try one. From the picture I suppose, however, the rund ones will not fit?

You’re right! They may have edited the product, you can use only the ones with that particular form factor, the round ones are not ed at that time i’m sorry. You can try something like that https://amzn.to/4ggs9NQ

Oh yeah, I meant to mention that I'd gladly pay again for any models with design changes. Not expecting anything free. Or at all, really.

Hi there, thabk you for your message and sorry for the late reply! About the happy face, i will add soon some variations! About the tollerance i have to take a look further, i do have some resin printers and see what changes need to be made to work properly on such technology, will keep you updated soon! Thank you and have a great day

That's great to hear, thanks for the response! These things are beyond my capabilities to do on my own, so your help is greatly appreciated. Feel free to message me again or I'll keep an eye on your page if/when you have anything new.

Its not something related to the files but on your side sorry, refund can not be accepted

Hi thank you! Yes it's a -free model so you can easily print as it is in its own original scale.

Hi Jon, thank you! Yes ive printed both Sleeping Beauty’s and Cinderella’s castles in resin in smaller sizes and comes out great, guess they might well work in bigger scales. Take on mind that if youll cut the model in pieces you might need some s.

Have a great day

Michele

Hola! versión impresa en pla 50eu mas envio. Que tenga un lindo dia!

Hi Stevie,

The hole has the right angle, maybe youre using the wrong cable?

Which version you bought? 1 or 2? If the first one you may try printing the top inserts that helps to keep the headphones in the correct position.

Im sorry but i cant share the model with you and its not possible to edit share or resell with anyone.

Thank you for ignoring the truth and not helping me.
3,50 for a useless file. should have modeled it myself from the beginning.
have a nice day.

Sorry to hear that! ive sold lots of printed stand this is why im telling you that you may just trying to use the wrong cable… btw you can ask cults to be refunded if you think that the file is not as described or you can me trough instagram with some pictures and will help you to find a solution 😜

Hi there, thank you for the message, will keep you update with a solution asap

It’s Cinderella castle

Hi Raphaella, as already explained you by email its something related to under extrusion of your printer

Hi there! which files are you printing? version with holes or not? if so are you trying the v2 bottom part with holes?

i am printing the one without holes, those parts do not match in size, i will send picture

https://drive.google.com/file/d/1J0W_FvH9w9OBWCCMsdhytoeDK-LKs6/view?usp=sharing

https://drive.google.com/file/d/1JEYYlIap2mI5ehjPOgPHwEQhTb5holDB/view?usp=sharing

when i try to put it together, the hinge mechanism breaks because its sizes does not match, something is off, i i was able to print one succesfully but i had to resize the bottom around 5%, i was lucky to rezise correctly but now i cant what % i used for succesfull print

update: also the STL seems to be damaged, i try to repair and it doesnt get past this https://i.imgur.com/HlGi2vZ.png

Hi there, mmm its very strange the files have different scale, ive printed several times and always going fine. I will take a look further today and will be back to you asap. Btw never use microsoft 3d builder to repair a file you should try netfab which is also included in prusaslicer for windows

Hi there, sizes seams correct for me, send me a dm on instagram so I can share some pictures with you. You can also try to re- the files from your cults may be possible that you have wrong files.

Hi there, youre refereing to the “back” of the hotel i guess instead of the bottom. As you can see on the stl previews the design feature the front of the hotel at the moment (on the backside there is the train station if i correctly), but you can mirror it and make the back like the front if you like

Hi Nicolas, yep the glasses are missing as you can see on the preview but if you like can try to add and edit the head to have two holes

Hi,

No problem,

But if you have or find the file for the glasses i'll buy it ,p

Thank you for your return

Hi there! the best way to print on fdm depends on which part you prefer having signs. In my opinion is better to slice vertical at 70/80' to put most of the s on the back of the shoes and just little on the soles

Hi there, the version with no rocks will take aprox 210g the other about 260g

Thanks a lot

Ure welcome! Just to ser infill to 10%

Goodmorning rtremarore, sorry for the late reply but im out for holidays, btw the best way to print on fdm depends on which part you prefer having signs. In my opinion is better to slice vertical at 80/90’ to put most of the s on the back and little on the soles, if you send me a dm on instagram i can sens you a pic. Best!