Hello there, 🙂
My name is Martin and I love 3D printing and creating unusual models for 3D printers.
👋 Bonjour à tous ! Ce fil de discussion est public, alors restons gentils et respectueux. Pas de publicité, de spam ou de choses désagréables !
🇨🇿 Pays du membre : Tchéquie
🌐 Langue préférée du membre : Anglais. Vous pouvez traduire en ligne via DeepL.
💡 Vous faites référence à un modèle en particulier ? Ajoutez le lien, le titre ou le numéro du modèle.
🖼️ Vous souhaitez publier des photos ? Utilisez un hébergeur gratuit comme ImgBB et collez les liens dans le message.
✍️ Astuces de rédaction : Utilisez le format Markdown pour structurer vos textes et les rendre plus lisible
hey, What about your created owl as a key holder for commercial sale because of your copyrights? I bought the file but you still have the copyrights on it.
This guy is ing off your model as his own.
Добрый день. Я ни как не могу оплатить, - все варианты "Карта отклонена. Попробуйте воспользоваться другой картой." Хотелось бы получить и попробовать распечатать модель. Если возможно отправьте архив на мою почту [email protected]
ЛЕГКАЯ ПЕЧАТЬ - СПИРАЛЬНОЕ СЕРДЦЕ - БЫСТРАЯ ПЕЧАТЬ ПЛА
Здравствуйте, я ответил на ваше письмо четыре дня назад. Но вдруг вашего адреса электронной почты не существует.
Здравствуйте я получил и отвечал на Ваше письмо Date: Mon, 6 Jan 2025 18:23:08 +0300 , может ушло в спам?
Здравствуйте, Martin. С новым годом!
Я хотел попробовать вот эту модель
https://cults3d.emulatorsite.com/ru/3d-model/art/spirify-heart-quick-and-easy-pla-print-sparki3d/kommentarii
ЛЕГКАЯ ПЕЧАТЬ - СПИРАЛЬНОЕ СЕРДЦЕ - БЫСТРАЯ ПЕЧАТЬ ПЛА
Это же Ваша почта ? Martin Vojáček
Я на нее и ответил.
Здравствуйте, да, это мой адрес электронной почты. К сожалению, когда я Вам написал, там было сказано, что адрес электронной почты удален. Пожалуйста, попробуйте написать мне еще раз со своей электронной почты.
Добрый день написал еще раз
Здравствуйте, я отправил вам файлы по электронной почте. Надеюсь, они прибудут. Но, похоже, так оно и было, потому что я получил предположительно автоматический ответ: Добрый день! Спасибо, что написали мне. Я отвечу вам как только смогу.
Если возникнут проблемы, обращайтесь. Привет
Добрый вечер! Спасибо большое попробую печатать у меня Cobra 3, наверно должно получиться. Еще раз спасибо. :)
Martin добрый вечер, напечатал 2е модели и есть повреждения в разных местах, что не так делаю? t- стола 65 , t-сопло 230 вот что получается - https://эублефар360.рф//0-File/photo_2025-01-15_17-23-21.jpg
Файли не працюють. Автор не відповідае.
Здравствуйте, я ничего не знаю о вирусе в файле. Когда я загружаю его, у меня нет проблем. Просто извлеките файлы и поместите их в слайсер. Извините за поздний ответ. Я только сейчас заметил, что ты мне написал. Если проблема сохранится, обращайтесь.
I was wondering what brass-colored filament was used for the bleach Benihime model. If anyone could give a brand that'd be appreciated!
Hello, I honestly don't know what model you mean. If you mean SPIRIFY type models, I used silk PLA from Kingroot manufacturer.
Скачав сову, але вона з вірусом. Файли зіпсуті, їх неможливо відкрити
The print is working just fine for me and i will assemble it today and post a picture, the creator was very helpful in helping me with some troubleshooting :D
dzień dobry, czy jeśli kupię projekt i wydrukuję go dla kogoś innego, to czy mogę go sprzedać w swoim sklepie na licencji?
dzień dobry, czy jeśli kupię projekt i wydrukuję go dla kogoś innego, to czy mogę go sprzedać w swoim sklepie na licencji?
Hello, it is about the owl, big problem with body "owl", lost many pla... It cannot print correctly... :(
Hello,
can you describe to me exactly what the problem is? If it is a print in the eye area, I recommend turning on Z-Hop. With some printers, the model is detached from the bed due to the eye connectors. For all cases, I recommend turning on BRIM around the model. If this is a different issue, please let me know.
Hey Martin,
I wasn't sure if [email protected] is your main email, so I wanted to let you know that I sent you an email there.
Hello,
I'm sorry, but somehow I missed it. I'm going to look at it right away.
Hello, I bought your spirity circle but after printing 0.12 on a prusa mini and 0.15 on a bambulab x1c, both in PLA, nothing happens the circle remains flat despite the holder. Can you tell me what's going on? and how to fix it?
The white one is the small model and the large one is beige.
https://ibb.co/30tp1dQ
https://ibb.co/zJ3RN06
https://ibb.co/XpMVKpR
Thanks in advance
Hello, you have to turn the holder 180 degrees and then attach it. In the ZIP file as well as on page of model, there is a video instruction on how to assemble the model. If you succeed, please share the photo via creations.🙂
Hello, I did watch the video but I hadn't seen that you were turning the stand! Indeed, it works now!!!
Personally, I'm going to try to use it to make the eyes to scare the herons away from my pond! Thank you very much for this very important information!
Wow, that's a good idea! Let me know how it works.🙂
Bonjour,
est-ce que votre modèle fonctionnerait pour de la résine (j'ai de la résine dure et de la souple) et si oui avec laquelle des deux ?
Merci.
Bonjour, de quel modèle parlez-vous ? Quant aux modèles SPIRIFY, honnêtement, je n'en suis pas sûr. Le matériau doit être flexible.
je parle du modèle CERCLE SPIRIFIE - PLA . j'ai de la résine Ultra tough (anycubic) théoriquement souple.
Aha, honnêtement, je n'ai aucune idée de comment ce modèle pourrait se faire une réputation sur une imprimante SLA. La flexibilité est essentielle, donc en théorie cela pourrait être fait.
ARE YOU SERIOUS? These circles are GREAT and you have two other projects...I have a small apt and this would look great right near my extensive amount of House Plants...THANK YOU.
Thank you for this comment!❤️🤗
Bonjour j'ai imprimé spirify square mais j'ai eu un soucis lorsque j'ai voulu fixer la baguette pour le mettre en forme ça ne tenait pas et quand j'ai réussi la partie centrale c'est cassé. Pouvez vous me donner vos paramètres sur cura ? Merci beaucoup
Bonjour, Il n'y a probablement pas de réglage universel pour les imprimantes. Cela dépend beaucoup du type (ou de la marque) de l'imprimante que vous utilisez. Par exemple, j'utilise une Creality K1. Je vais vous donner les valeurs de base :
Hauteur de couche : J'ai imprimé ce modèle à 0.21 mm et ça a bien fonctionné. Mais pour plus de sécurité et assurer une bonne impression, je recommande d'imprimer à 0.12 mm.
Murs : Si vous avez des problèmes pour que les lignes individuelles de filament imprimées se connectent, rendant ainsi l'objet plus résistant et moins susceptible de se briser, réglez l'épaisseur des murs à 1.
Couches inférieure et supérieure : Réglez-les en motif Zig Zag. Cela permettra une meilleure connexion entre les murs extérieurs.
Remplissage : Il est bon de régler le remplissage à 100% et de choisir le motif Zig Zag. Cependant, si vous avez réglé la hauteur des couches inférieure ou supérieure de manière à couvrir tout le modèle (si le modèle est assez fin, c'est probable), alors vous n'avez pas besoin de vous soucier du remplissage.
La vitesse d'impression est très subjective. Mais généralement, il est bon de régler la première couche à une vitesse plus basse (ce que vous savez probablement). Je ne mentionnerai pas la calibration de la plate-forme, vous la maîtrisez sûrement sans problème. :)
J'espère que mes conseils vous ont été utiles. S'il vous plaît, faites-moi savoir comment cela a fonctionné et je serai incroyablement heureux si vous partagez ensuite votre impression ici sur Cults3D ! :)
Bonne fin de journée,
Sparki3D
Merci beaucoup j'ai réussi à le faire en modifiant quelques paramètres
Hey - interested in obtaining a commercial license for one of your designs. You have a patreon or some other way to facilitate that?
HI. I just bought the morf worm. i am having problems ing it
Hello, what is the problem with the ? Like it won't start ing at all?
It won't at all
That's weird. Try turning your browser off and on, or try a different browser. But if the problem is on the server side, then it's more of a question for the server .
i cant get the file to go into flash forge software
Hello, I don't know what files you mean. What do you mean by flash forge software?
Can i sell the flexi squezzy for small business? i will share the link for your model (:
Hello, drop me an email.
I have tried printing the owl key holder twice & both times the eyes catch so will not blink. Is there a modification I can make so they work correctly?
Hello. The instructions mention that it is better to use "Z hop", for a better result, especially in the upper part of the model. Also use Brim to be safe.
Hello, thanks for the model, I am curious if you can make it circular not flat as it is
Hello, I don't know what you mean. Circular becomes when you put it on the holder if we are talking about Spirify Heart.
I don't know how to explain it, what did you use to make the model. i mean the FLEXISQUEEZE
Do you mean how I modeled it?
yes , what did you use to model it
I used Blender
may i have the file i want to try play with it? thank you
Sorry, but that's my a source file that I do not provide to anyone.
Hello. May I purchase commercial rights to sell this?
Hello, you can write me on my email address: [email protected]
Hello. I purchased your spirify - heart. When I load the stl in cura there are multiple errors. None of the heart segments are connected, resulting in a failed print. I would like a refund please.
Hello, can you send me a picture of errors to my e-mail ([email protected]) please? What layer height did you use? If you can, please send me a photo of your profile set in Cura slicer.
I use Cura Slicer as well and haven't run into any problems. You probably have the layers set too hight. Try to slice the model with a layer height of 0.12mm. If you still have problems with the model, please me at my email address above. I need to know exactly where the problem is so that I can possibly solve it. I don't want to sell a defective model. Thank you for your cooperation.🙂
Hey, I am pretty sure this is your design and pretty sure you didn't mean for it to end up on here. https://makerworld.com/models/144023
I found this while looking through toys on the Bambu Handy app just today
This is also concerning and found too https://www.thingiverse.com/thing:6417674
Make sure to visit both sites to take it down. Your work, not theirs
Hey, thanks for the links. The first one is really an exact copy of my model. The other one is similar to my model but not the same. Anyway, thanks for the info. Can you give me your email? I'll send you my paid models for free on it. 🙂
here is my email: [email protected]
once again, I highly appreciate your talent and all you do for everyone ^-^ thank you for being you!
Big thanks Dubzy! You made me incredibly happy with this message!🤗 Without people like you, I wouldn't enjoy creating. So also thanks for being who you are!🤗
No rush or anything, just curious when the models will be sent to me ^-^
Email is on its way. Perhaps he has already arrived. Thank you for everything! 🙂
Hi Sparki3D!
Just a quick message to personally invite you to the free open beta of CultStats — a new analytics tool I’m building just for Cults3D creators. It gives you clear insights into your sales, revenue, and top designs, all in one dashboard.
While not officially part of Cults3D, CultStats is one of the first tools built specifically for sellers on the platform, and it's already trusted enough to be listed on the official API page:
https://cults3d.emulatorsite.com/en/api
Give it a try (free during open beta):
👉 https://www.cultstats.com
Would love your — it helps me improve the app for creators like you!
— Angev