👋 Bonjour à tous ! Ce fil de discussion est public, alors restons gentils et respectueux. Pas de publicité, de spam ou de choses désagréables !
🇰🇬 Pays du membre : Kirghizistan
🌐 Langue préférée du membre : Anglais. Vous pouvez traduire en ligne via DeepL.
💡 Vous faites référence à un modèle en particulier ? Ajoutez le lien, le titre ou le numéro du modèle.
🖼️ Vous souhaitez publier des photos ? Utilisez un hébergeur gratuit comme ImgBB et collez les liens dans le message.
✍️ Astuces de rédaction : Utilisez le format Markdown pour structurer vos textes et les rendre plus lisible
Hi Sindbad,
I just bought your Jing Yuan spear model. The files provided did not include a copy of the entire model without any cuts or separation. Could you send me the spear as a single model, without the hole cut for the transparent circle piece in the middle? Thank you!
Added solid version in models
Thank you for your quick response Sindbad 🙏
Hello, I would like to know if it is possible for you to sell me only the Asuka buttons from all the Asuka parts you sell. Is this possible?
Hello, i create new lot https://cults3d.emulatorsite.com/en/3d-model/fashion/asuka-langley-buttons-fron-costume-rebuild-cosplay-stl
Hi, my 3D printer (bambu mini) can print max. 18cm*18cm*18cm
Can I use the alfira horns file or is it too big? (or is it possible to make it in parts?)
Hello, your slicer access cut models in program itself
Hi! I just bought your overwatch ashe armor, but I noticed that two of the files are corrupted it's palm left and right. Could you check and send fixed versions?
Good evening. Thank you for your message. Added an archive with two palms. Also in the archive are additional models for the shoulder and bracer, and alternative knees and hip symbols without armor.
Hi, could you share any assembly instructions for the SYMMETRA HELM FOR COSPLAY—OVERWATCH—#2043369? I'd probably be able to figure it out if I could view it from more than the shown angles on the page; maybe you could share the 3D model or video of the model you used. I'm trying to determine how to assemble the piece appropriately, and I'm having a bit of a struggle visualizing some of the ings around the "ear left" and "ear right."
Good afternoon.
I just got to the computer.
I added two additional screenshots with notes about magnets and where to stick the elastic band.
I did this when I was printing and assembling the helmet.
Hi there, im looking forward to get Wriothesley collection, is there any chance to get some type of guide of where wich part sould go to? Also maybe some hints how to assemble guntlets
also love your work <3
Hi! Added an FBX file with models on the body and PNG images of the character
I saw a listing for your Overwatch 2 Widowmaker visor but when i clicked on the link it said it was deleted. Do you still have the model? I am interested
Hello. That long story with low-poly model owner. decide delete that lot.
hi how do you cut your 3d models?
Hi. Some in blender, some in orca slicer
hi for the griffith sword can i have a full fbx so i can understand how to assemble everything?
Hi, a added fbx file with full sword
Good morning,
I purchased the Asuka armor and backpack stl file but it doesn't work. I use blender and I don't see anything if I import it. When opening the file online the design is incorrect (for example if I open the complete baack I see it with one half too many planted inside it). Why? Is the file damaged?
Thank you
Hello! https://imgur.com/a/mSjtdtY i archive from site and open all models in blender. Website and slicer opened that too https://imgur.com/a/mSjtdtY
May be archive don't loaded full, try to reload it.
Hello!
I might buy the Anubis Cosplay Mask, which is divided in 4 files but I wonder what is the minimum 3D printer size recquired to print each files?
I thank you early for the answers.
hii! so i am not sure if i should write this here, but do you have a photo that makes it more clear where all of the 3d printed pieces of the yae miko headpieces go?
Hello I am unable to open all of the files in the print specifically the BD Armature. Ive ed the file twice and it says it is corrupted.
Good afternoon. Thanks for the message. There is no need to worry about these four files, they got into the archive by accident, after ing the files from the Blender program.
Hello! Do you have any assembly instructions for the freminet helmet? There are a lot of separate pieces and I don't want to make any mistakes when putting them together :)
Hello! I added two screenshoots with all unsliced parts in different colors. I hope that can help you.
Hi, how many parts is Longinus' spear divided into?
Hello, now they have 7 piece for 36sm high printer, but i can cut they for hight which you needed
I have a FlSun V400, you can cut the file? I ed an there is only 3 pieces, not 7, my max hight is 38.5 cm, but is better max 35.
Can you add the connector to the top blade?
yes, i do that. Nees near 30 min else
compited
Hello! I would like to buy only few pieces of this set, here is an image with them selected,
Thank you so much! ^^
Hello hello , I bought the small pack tartaglia prop, I wanted to know if it was possible to get the buttons of the front because they were only on the huge pack one
I started printing the amulette and it do look amazing
Hello, sorry for late answer. Can you send pic which buttons you want on my e-mail [email protected]
hello i bought GENSHIN IMPACT ZHONGLI COSPLAY PROP for the shoulder slip is itpossible to have 2 files ? one for each side ? thanks if you can i'm not skilled enough to cut my file thanks for your help best regards
Hello. Can you write your e-mail, and i will send that 2 files?
[email protected] many many many thanks
Доброго времени суток.
Мне нужны не все модельки, а часть. Где можно с Вами связаться, чтобы их купить? К сожалению.. на этой платформе я не могу ничего приобрести из-за ограничений в оплате.
Ку чатланин. Есть ВК https://vk.com/sindria_king можно просто на мыло [email protected]
Hi, I have seemed to have an issue with miko´s earings, there seems to be missing some parts for the left one
Good afternoon!
Thank you so much for pointing out that not all items are loaded in the lot. I ed the correct archive, try ing it now.
Hello, I had seen that you have the pieces of Asuka's armor, and I wanted to ask you if you could personally order Shinji's armor in the same way, buttons, bracelet, shoulder pads and chest armor.
Good afternoon! Can you send me screenshots, or a figure that you want to get models for?
Yes, no problem, mainly I would like to ask you for the chest part, and the other small pieces. https://ibb.co/cQXGxCQ
Hello, the tartaglia cosplay props can't be extracted. Seems to be the same problem as with the yae miko pack. Can you a new archive? Thank you
Hello, I have reloaded the archive. Now it is being unloaded correctly. I apologize for the inconvenience.
Hello, I just the yae miko pack and I can't extract the file for the archive, I've try to it again but same I can't extract and have acces to the fils inside the archive.... Can you help me ? Thanks !
Hi there! I have a question regarding your Wriothesley files concerning the chains. Do they move or is it a solid line? And are the badges one or two files? Just making sure, if I will need some glue or extra equipment to assemble the whole thing :). Btw do you also sell only parts of the models? For example I really don’t need the bigger leg parts, as I will craft them out of foam. If not, it’s cool. Thank you!
Good afternoon. The chains have several options, one is printed from the table as flexi-toys, after which the extra links are removed or assembled by a jumper into one long chain. There is also an option to print each link separately in the quantity you need. Question about the symbols, do you mean in the eye of God, or in the symbols with wolves? If the eye of God, then glue will be needed to glue the halves, both the eyes of God and his frames, if we talk about the symbols with wolves, then they are solid and they will only need to be treated with an abrasive after printing, primed and painted. And I understood the question about the legs correctly, what do you want a lot without legs, just accessories for a suit and mechanical arms?