I would like this ascent large roof rack in the black and red piping. May I purchase thise from you???
- 0 j’aimes
👋 Bonjour à tous ! Ce fil de discussion est public, alors restons gentils et respectueux. Pas de publicité, de spam ou de choses désagréables !
🇨🇦 Pays du membre : Canada
🌐 Langue préférée du membre : Anglais. Vous pouvez traduire en ligne via DeepL.
💡 Vous faites référence à un modèle en particulier ? Ajoutez le lien, le titre ou le numéro du modèle.
🖼️ Vous souhaitez publier des photos ? Utilisez un hébergeur gratuit comme ImgBB et collez les liens dans le message.
✍️ Astuces de rédaction : Utilisez le format Markdown pour structurer vos textes et les rendre plus lisible
Écrivez votre message :
14 commentaires
Hi, for purchasing products, please see our store - https://sbiprints.etsy.com :)
- 0 j’aimes
Im doing something wrong. 10 hour print and it wont fit. holes dont line up and its a bit too wide. now what
- 0 j’aimes
Hi, please me via - https://www.facebook.com/sbiprints - more than happy to help figure out the issue.
- 0 j’aimes
Want to say that the designer responded quickly to my issue and was VERY helpful. i will be following him. Thank you again
- 1 j’aime
Hello! thank you for supplying this file for purchase! I was hoping to add a request, that you could provide me a file with NO Filets on the part. I have a few modifications I would like to make to it, and filets make it very difficult to do so. I have purchased the files provided, let me know what is required to get another file that is "filet free". Thank you!
- 0 j’aimes
Hi Hmann1020, great to hear you're looking to be creative with our files. If you'd like to reach out via - https://www.facebook.com/sbiprints - and we'll be able to help you out and see about working to provide a different version of our products.
- 0 j’aimes
Im having trouble extracting the files. Error says "file path name too long" Got the roof rack printed but had issues extracting that as well. Help please.
- 0 j’aimes
Hi cliftondaniel, please message us - https://www.facebook.com/sbiprints - and we'll be able to help you out.
- 0 j’aimes
I got it. I just changed the file name before extracting. Thank You!
- 1 j’aime
The part does not fit correctly it's off by 8mm and will to screw in place
- 0 j’aimes
Hi Kopriti, please message us - https://www.facebook.com/sbiprints - and we'll be able to help you out. We've got this printed for our 4WS model and had no issues with fitment.
- 0 j’aimes
Not able to locate the link in Facebook. I took pictures of the print and fitment.
- 0 j’aimes
Hi Kopriti. if Facebook doesn't work for you - we can also chat via Etsy (https://sbiprints.etsy.com/). It allows for pictures and other details to be exchanged.
- 0 j’aimes
Can you design a mount case for rhino 40A esc? me [email protected]
- 0 j’aimes
Sent you an email :)
- 0 j’aimes
Hey. Purchased the RedCat bed and spur gear guard STLs from you. Great ideas and design. Just printed the spur and mounted it and am not sure if it's intentional, but the spur guard doesn't entirely cover the gear (see pic link). I'll mod the STL to stretch that section as I'd like more coverage, but wanted to let you know in case something has changed on RedCat's side (I just got the Fusion the other day). http://www.plastibots.com/wordpress/wp-content/s/2024/10/IMG_1156.jpg Have the bed sitting printed on my A1, so can't wait to get that installed. BTW, I first came across your ETSY shop and think you are out of the GTA? I'm in Burlington and crawl with the GTA RC Crawlers gang (mostly out this way). Also have an Etsy shop, but mostly sell decals and slowly getting into 3D printed stuff. Dave
- 0 j’aimes
Hi Dave, added you on FB :) Look forward to chatting with you more. Thanks for reaching out.
- 0 j’aimes
salut je ne suis pas capable douvrir le fichier avec mon application 3d ne peux rien imprimer 0 fichier stl
- 0 j’aimes
Hi, which design were you having issues with? I can provide STL files for you. ||
Bonjour, avec quel modèle rencontrez-vous des problèmes ? Je peux vous fournir des fichiers STL.
- 0 j’aimes
Hi. Just ed this and thanks for creating. Was looking for a deeper box to hold my ESP32 controller for all my LEDs. Better use of my $$ than to have to create myself! Wanted to draw your attention that the 2 mounting screw holes toward the front are flat on both top and bottom (yours has a bevel on the bottom - which I suspect was done to reduce the need for s) All, good as I will modify to make it work for me, but wanted you to know in case you were not aware. I have a new Capra from May 2024, so it could be something new they are doing. I have a pic if interested.
- 0 j’aimes
Hi :) You're correct, the mounting holes towards the "front" of the box do have a chamfer on the bottom; though it is there because they go on the - bottom - side of the stand-offs that come off the truck - not on top where the chamfer would be an issue - you screw into them from the top.
- 0 j’aimes
Thx, and yes, that was my point. The top Capra mounts are threaded, so I had to mod yours to screw from bottom up - like the stock setup. All good. I made it work.
- 0 j’aimes
Hi I do not have a 3d printer and was wondering if you made and sold the high clearance ESC tray? If so how much ? And can I buy one? Thank you.
- 0 j’aimes
Hi, you can purchase the tray on my Etsy store: sbiprints.etsy.com
- 0 j’aimes
Hi, for the CJ7 - Rear Tub Fender, is there an .stl file rather than .3mf? TY
- 0 j’aimes
For sure, there now :)
- 1 j’aime
TY, will let you know the outcome of the print.
- 0 j’aimes
Hey buddy just wanted to say absolutely love all the files I've gotten off you for the redcat fusion, fit perfectly 😎 thanks
- 1 j’aime
TY :)
- 0 j’aimes
Hello I bought your ascent fusion sliders but am having trouble opening the file to print them is there any way you could help? Thank you
- 0 j’aimes
Hi, which slicer software were you running? You should just be able to open via the slicer and print from there.
- 0 j’aimes
I’m using Creality slicer
- 0 j’aimes
Hi, I've added stl version of all the files to the listing. Hopefully that helps you.
- 0 j’aimes
Thank you I will try that
- 0 j’aimes
Just purchased and ed your explorer edition truck bed for the ascent fusion - there are zero accessories to go with it in your models. Are you ing them or?
Accessories are purchased separately - via this item: https://cults3d.emulatorsite.com/en/3d-model/game/redcat-fusion-ascent-explorer-bed-accessories
If you have any issues or had further questions you can reach out to us on FB - https://www.facebook.com/sbiprints