61 commentaires

Apologies for that, the civilian hat is designed to be resin printed at 1/35 scale. It will likely never slice for FDM printing. I will refund you now.

¿No lo podrías corregir para que sea válido para FDM? Es una pena! :( sino es posible quedo a la espera del reembolso. Gracias.

I’m sorry to hear that you’re struggling with this, it would be interesting to know which slicer you are using; as I have printed them several times successfully. I will refund your purchase.

I am using AC DLP D2, and the resin used is official resin with no problem with the parameters. The inner wall of the model is very thin, and whether it is 1:35 or 1:72, it cannot be printed successfully. I used different s and angles, but unfortunately it still failed, which means I cannot continue to purchase your other files,

Sorry about this, I have refunded you. However, the model does print fine as can be seen by the images on the listing.

If it's at a scale, is it possible to adjust the program to make it full size?

All of my designs are at 1/35 scale for scale modelling, simply multiply a dimension inside your slicer by 35x to achieve 1:1.

Sorry I’m extremely busy at the moment, so I have refunded the M1 helmet. I hope a re gets it working though. Apologies

Hi, sorry about that. What software are you slicing in?

Lychee pro

A few people have had issues using my models in lychee; I think it may be because the s have been created in chitubox and lychee doesn’t like that. Is the issue only with the pre ed version?

I haven't tried it any other way other than with pre s. I'll give it a go tomorrow and get back to you with my information

Sorry these are very small models designed for resin printing. The type of printer you have will not be able to print that small

Oh okay thank you. What resin printer would you recommend? Something I've always wanted to as well

I have an elegoo mars 2, it’s a bit outdated now but they have some newer models with higher resolution screens. Don’t forget that you’ll need to have a way of washing/ curing the prints too. Hope that helps

Sorry that you are struggling with that, I have successfully printed the pps 43 and must it that the walls are very delicate on the barrel shroud as it is printed scaled exactly, poor printing design on my part. Unfortunately I believe that I no longer have the ability to edit the model (computer issues) but I will look into it for you. Might I suggest in the meantime printing it with both over and under exposure which may rectify the fragility. Apologies once again

I can try and do that for you, is there a specific orientation that you would like the mp40 printed in. It may take me a while to get round to as I have uni work to do. I could directly send you my original file if maybe the has corrupted?

Thanks for your fast answer.
Yes, we can try it with your original file again. How do you like to send it to me?

When do i get the original file?

I have ed a replacement file for you, it opens in my chitubox and previews for print etc. unfortunately Cults will not allow me to refund you as the payment is no longer pending, however, if you email me (only so that the code is individual) I can I think set up a discount code for a few items like ammo boxes (which I know are definitely flawless as they are drawn in a different program, so there won't be any printing issues :))

Hi, I’ve printed this with no issues before using the parameters that are listed, maybe the file has become corrupted I can send it to you if you would like. I’m very sorry about this but unfortunately I can’t test print it or redesign etc, as I am at university.

Well, ARAGON4, the simplest way of scaling would be to take the dimension of the holster in your slicer (for example 10) and multiply that by 35 to get a 1:1 model ‘length’ we then divide that length (350) by your desired scale (8) to get the length in appropriate scale (44 for the original 10)

Hi GELERTH, if you click the link (envelope) next to my profile picture on my profile page it will open the email for you (it is next to instagram and youtube and the donate option this is because cults does not like redirection of queries in the messages page ---> 'Important: please answer here and do not redirect to other mailboxes'

Hi, Sorry about that, yes people have been having issues with the M1 helmet recently. I expect the has corrupted as I have printed plenty with no issues etc. I have not had a chance to re files yet as I am away from home. Could you potentially try reing or opening in another slicer? I use chitubox and files that other slicers have issues with are useable. This may be a temporary route until I can fix the issue.

Sorry for the inconvenience

Yes I can re the model etc, that might solve the issue. I’ll get on it ASAP sorry for the inconvenience

Yeah, a few people have had problems with lychee and my files. What exactly is the error with printing?

I’m not sure the model would be suitable at 1:1 because of the amount of triangles I’m afraid. The file would be massive

Hi Rick, I’ll have a look when I can. I’ve found the s from cults can become corrupted so I’ve sometimes sent the files via email. What are you slicing in?

Will do when I have a moment, sorry that it’s an issue it seems to happen with some s from cults

I will wait patiently. I am sizing up to 1/6 and 1/4 scale, you can see my work on Facebook .Thank you very much, Kind regards Phil Woollard

Nothing in my inbox as yet? Kind regards Phil Woollard

This file looks like it should be suitable to work with 👍

Yes, I’ll look into this asap, it’s likely a corrupted as I’ve heard similar issues. I’ll check and get back to you as soon as I am able

Hello BENJLEE92, I have checked by ing the grease gun file and opening it in chitubox, my slicer, and there are no faults with the model opening whole. I suggest you try to again and if this does not succeed I shall look into it further.