👋 Bonjour à tous ! Ce fil de discussion est public, alors restons gentils et respectueux. Pas de publicité, de spam ou de choses désagréables !
🇧🇷 Pays du membre : Brésil
🌐 Langue préférée du membre : Anglais. Vous pouvez traduire en ligne via DeepL.
💡 Vous faites référence à un modèle en particulier ? Ajoutez le lien, le titre ou le numéro du modèle.
🖼️ Vous souhaitez publier des photos ? Utilisez un hébergeur gratuit comme ImgBB et collez les liens dans le message.
✍️ Astuces de rédaction : Utilisez le format Markdown pour structurer vos textes et les rendre plus lisible
Hi, I purchased the STL file I believe under a guest . I had not created an yet and I’m having problems ing the file and sending it to the person that’s going to 3-D print it for me. Do you have suggestions as to how to do this? I ed it on my phone, but I just trying to get the file to him through email. Thank you so much!
Hello! In this case, you need to Cults3D . I have no record of any purchase associated with your name or of any purchase made without logging in. On my dashboard, it's only possible to take action if both the name and the purchase are properly ed.
Hi, I purchased the STL file I believe under a guest . I had not created an yet and I’m having problems ing the file and sending it to the person that’s going to 3-D print it for me. Do you have suggestions as to how to do this? I ed it on my phone, but I just trying to get the file to him through email. Thank you so much!
Olá Rico, gostaria de saber se você vende um pacote de stls? Eu me interessei em alguns haha
Claro, me chama no meu insta ou se tiver meu whats que negociamos :)
Hello, I bought Glinda's crown model from Wicked, a guy asked me to print it for him and immediately after buying it he wrote to me that he had already bought it from amazon without consulting me first and that he didn't want it anymore... I know it's my mistake but could I ask you for a refund?
Yes, I will request a refund. You should receive a confirmation email shortly.
What type of filament did you use for Glindas's crown? It printed out nicely, however it seems very delicate with regular PLA filament.
You did a great job on the design.
Hello! Thanks!!!!
I used PLA+ from esun, at 220 degrees. But I also made it in PETG bambu lab, in their standard configuration. The adaptive layer helps a lot with fine details.
*the resolution I used was 0.16
Rico my heart is broken because this was a present for my wife’s birthday and I spent 15 hours trying different things and I couldn’t get it to work and now I don’t have my present for her. 😢
oh, sorry about that :( - have an amazing year!
I followed the instructions and your suggestions but no matter what it continues to break and is just to delicate. Will you please refund me?
Hello! I am saddened by your request. I requested a refund on the platform. You should receive a message from Cults soon.
Thanks
Rico my heart is broken because this was a present for my wife’s birthday and I spent 15 hours trying different things and I couldn’t get it to work and now I don’t have my present for her. 😢
Hey I’ve got the blinds crown but wondering if you can make it a bit thicker? Just due to when printing it is breaking just need it a bit thinking filament wise
Glinda*
Hello, how are you? It shouldn't break easily. I've printed about 8 times with it and had no problems. Is your too tight? Try increasing the top interface of the by 0.03, as this may help. Silk filament tends to break more easily, in this case, try reinforcing the filling in the area where you had problems to see if it helps. Unfortunately, I can't make a new version of the crown at the moment :(
If you have any problems and can't print, you can request a refund for the SLT through the Cults3D platform, no problem.
Hey I’ve got the blinds crown but wondering if you can make it a bit thicker? Just due to when printing it is breaking just need it a bit thinking filament wise
Hey I’ve got the blinds crown but wondering if you can make it a bit thicker? Just due to when printing it is breaking just need it a bit thinking filament wise
Hi I wanted to know if you take design commisions? im looking to have the wand from IVE accendio music video modeled so i can print and detail it
Hi Rico! I work for Formlabs and would love to print and feature some of your Wicked designs on our new social media channel @formlabs_creator_series. This would entail us printing the models and making a short TikTok or Reel of the process. We would give designer credit to you in the caption. The models we're interested in are the bubble crown and Elphaba's glasses. Thank you!
Hi, I'm not interested in partnerships at the moment. Thanks for ing us.
how did you print Elphaba glasses in multicolor. do you glue the pieces together? is it possible you can make a multicolor print for AMS an all in one print and then of course the arm separate. thanks
I imported the files together into BambuStudio (multicolor printing) and defined a color for each one. I printed everything together, with the legs separated. Then attach the legs to the glasses with glasses screws.
Hi, I would like to make a fidget toy out of your model Mushroom Power Up - Super Mario, by putting a keyboard switch between the top and the body. However, connecting the switch to the top of the mushroom has been difficult due to its angle. Is it possible to get a step or other design file of just the mushroom top?
Thanks!
Hello, unfortunately I don't have time to go back to this model and make the adjustments you need.
Hello, thank you very much for your purchase. Good impression!!! ;)
Thanks!
hey are you going to make more designs of the ear cuffs? I think the wings are wonderful
Yes! soon I will launch five models
Hello! I have several 3D models of yours and I always have a question about them, how big are they if I print them? It would be great to know so I can scale it if I want to make it bigger. Could you tell me how big this one is? If you put that information on each model it would be great! Thank you very much in advance
Hi, the size of the STL is the one I'm printing at and the one I designed it for. You can reduce their scale to 70% if you want, but I haven't tested smaller than that. You can also enlarge them, but I haven't tested how much this will affect the fittings.
Hello, I have a close friend with a printer but he's not a designer. I'm looking to partner up with someone who can help me create a small prototype of idea i have. It's pretty small. I need someone that can create the stl file for me. :) Can you help? I am willing to pay :)
Send me your idea at [email protected] and I'll see if I can help you.
Hello, I saw the result of the mask and I was fascinated, of course I will make a version for cosplay, thank you very much, It will be on sale in a moment.
do you have an instagram?
I don't have it, I'm sorry, I'm just a design fan, the design is already online, if you like you can go review it and give me your opinion.
okay, I was going to tag you in a video, but don't worry. Thank you very much
Good evening, i wanted to ask about the print profile for this spike mushroom i have been having issues with the mushroom having a print issue on top creating a ring. i have tried 20% grid, gyroid and rectangle infill and it seems the same. Not sure if there is a way to share photos of this. thank you
hello! Can you share photos of your print so I can look at it? Send me a message at [email protected] and I'll get back to you with photos of my project and configurations. thanks
Hey, Rico3dMaker! Awesome models. I created a mushroom one, and then found yours and it is much nicer. Is there any way to get a commercial license for https://cults3d.emulatorsite.com/en/3d-model/game/mushroom-power-up-super-mario so that I can use it for Etsy items I want to print and sell?
Hello! I believe you can sell your Mushroom prints without any problems. I don't have any kind of special license for this, but if you want my permission to sell mushroom prints, I'll give you permission. I just don't allow the sale of the STL, this is individual and non-transferable, ok?
that Mario and other Nintendo brands may have commercial restrictions in your country, I suggest you understand your legislation before having any problems.
Awesome, thank you. I will purchase a bunch of your other designs too. ;) Next question I have, is it possible for me to scale them down a bit and still have the parts all fit?
I did a test print and was able to scale at least one of them down quite a bit and it seems to work! Thanks so much, going to donate some to you now for your creations, and to buy your other designs!
Yes!
I only tested scaling it to 70%, due to the sparkles of the eyes. If it's smaller than that, I don't think the sparkles will fit.
Thank you very much for your donation :) I was very happy for the recognition
i have a location on a corner which includes an alleyway i would like rendered so i can print in 3d, is that possible? the alley is on google : the famous alleyway : thanks
just wanted to say thank you for ing the mario mushroom, i am putting my little machine to the test with it.
thanks!
Hi Rico, I'm interrested by the question box only from the Cloud flower (https://cults3d.emulatorsite.com/:1494963) Is there any way to get a new with the yellow question box and the boomerang? Thanks in advance for letting me know.
Hi Nick! Thanks for message.
Buying both (or any other flower that has the question block), you can exchange the box between them, the fit is the same between the flowers and the boxes (except from the talking flower).
I leave here a 40% discount voucher (40NICK) so that you can use it when purchasing the flowers. *
valid until 12/12
You are the man ;) Thanks
Hi,
I purchased this and can't get it to print as is, I noticed you mentioned splicing them in half in the description. Are these files included and if so I am so sorry for bothering you when I'm being daft and if not could they be because I am very much a beginner and have no idea how to do it myself.
Thank you for your help
Jo
Sorry I thought this was tagged in with my purchase - it was the glinda bubble wand
Hello!
The suggestion to cut it in half refers to the bubble tip. I don’t have a pre-split version of the file, but it’s easy to do in your slicer. Just place the file on the build plate, select it, and use the slicer’s cutting tool. You can also find tutorials on YouTube that explain how to do this step-by-step.
https://youtu.be/zTZOH6XkUPU?si=MSTaOF5aIgYQqXAs