Aller au contenu
RedChurch
@RedChurch
Compte certifié
Que signifie le symbole « Compte certifié » ?
Compte certifié
Partager ce compte

Hi everyone.
A few words about me.
Since I was a little boy I loved drawing and deg. Many young years I was involved in modeling and painting figures for Warhammer. Unfortunately, when I was studying computer engineering, I gave up my hobby so that I could pursue my studies.
A few years ago, I bought my first 3D printer (FDM and SLA), which rekindled my ion and hobby.
I decided to try deg cool, useful things myself.
So my dear friends I invite you to visit my profiles on Printables, Cults3d and my personal site.

Greetings
RedChurch

Designer Téléchargeur·euse Téléchargement Influenceur·euse Vendeureuse Populaire
Message d'accueil de RedChurch
RedChurch
RedChurch

Hello again.
On Monday I managed to fix the motherboard in my computer. Yesterday evening (again) I put the whole computer together and on occasion I will replace the water cooling with a new one. The computer is back to life again and I can't wait to start publishing more projects. As a first gut I will publish the PokéBox project I made with my daughters. I hope I make them happy today with this news and you with this project.
Warm greetings.

👋 Bonjour à tous ! Ce fil de discussion est public, alors restons gentils et respectueux. Pas de publicité, de spam ou de choses désagréables !
🇵🇱 Pays du membre : Pologne
🌐 Langue préférée du membre : Anglais. Vous pouvez traduire en ligne via DeepL.
💡 Vous faites référence à un modèle en particulier ? Ajoutez le lien, le titre ou le numéro du modèle.
🖼️ Vous souhaitez publier des photos ? Utilisez un hébergeur gratuit comme ImgBB et collez les liens dans le message.
✍️ Astuces de rédaction : Utilisez le format Markdown pour structurer vos textes et les rendre plus lisible

Écrivez votre message :

19 commentaires

Had3k
Had3k

Hi! I have an idea for a pullout miniature paint brush holder. What would be the best way to submit a drawing or other communication?

  • 1 j’aime
RedChurch
RedChurch

I think Discord will be the best place to submit project proposals – https://discord.gg/K2dcvMPp
CHAPMAN
CHAPMAN

Thanks for the speedy update. I will print it right now and let you know. Thanks again.

  • 1 j’aime
mike-18kq
mike-18kq

Hey Redchurch,

Just want to know if any of your designs have commercial licensing available?

Cheers,

RedChurch
RedChurch

Hi,

Thank you for your interest in my work.

At the moment, none of my designs are available under a commercial license. However, I’ve been receiving more inquiries about this recently, so I’m considering options for enabling commercial use in the future.

I’m currently looking into how best to manage this through Cults3D.

Best regards.

  • 1 j’aime
mike-18kq
mike-18kq

Thanks for getting back to me, you should definitely look into it I think you could do well from it...
CHAPMAN
CHAPMAN

No problem at all. Love your work and the paint workstation and look forward to what you are coming out with next. I totally understand computer problems and hope it doesn’t keep you down too long, I know I go stir crazy if I’m not able to get something done. Thanks for the quick response.

  • 1 j’aime
RedChurch
RedChurch

https://cults3d.emulatorsite.com/en/3d-model/tool/rps-150-150-150-v30mm-rack-16b

RedChurch
RedChurch

Welcome.
Print out the top level and see if your Pro Acrylic paints fit the holes. Unfortunately, I do not have these paints, but the size I got from a friend. I'm not 100% sure it's ok because I haven't tested it myself. Please let us know if everything is ok.
Greetings.
CHAPMAN
CHAPMAN

Did I miss the paint rack that can hold Pro Acryl paint bottles? Is there any estimate on when this size will be done? Thanks for the great work so far and look forward to what is coming next.

RedChurch
RedChurch

Hello.
Yes the project is in preparation. Many other projects are waiting to be published.
Unfortunately, I have to ask you and all those waiting to be patient.
During the maintenance of my computer there was damage to the elament on the motherboard and I am temporarily blocked from any work until the fault is fixed. I hope for a quick repair and return to more publications.
Greetings to all.
Ghost_of_SpadeS
Ghost_of_SpadeS

Hello, I wanted to know how many spools of thread would be needed to print all the parts for the RPS bundle 01 ?

RedChurch
RedChurch

Hello.
I have completed in RPS Bundle 01 the values in grams for each module. I want to invite you to read the description: https://cults3d.emulatorsite.com/en/3d-model/tool/rps-bundle-01
Regards.
PS. The remaining modules in the process of completion.
tracyrederick
tracyrederick

Can you please make a version to hold 35mm paint bottles.

RedChurch
RedChurch

Hello.
Is the 35mm size the exact size of the bottle?
I will try to sew such a version of the racks in the coming days.
Greetings.

  • 1 j’aime
tracyrederick
tracyrederick

Yes, and thank you!

  • 1 j’aime
tracyrederick
tracyrederick

Have you had a chance to work on the 35mm size?

RedChurch
RedChurch

es a design with larger openings modeled on https://cults3d.emulatorsite.com/en/3d-model/tool/rps-150-150-v-ap-rack-20b is ready. I still need a while to prepare graphics for presentation and I will publish this and some other designs. Be patient and watch :D

RedChurch
RedChurch

https://cults3d.emulatorsite.com/en/3d-model/tool/rps-150-150-150-v35mm-rack-16b
Greetings.
tracyrederick
tracyrederick

Hello,

I purchased RPS 150-150-150 marker rack. Do I need to print these files (or any of your files) with s? I plan on building a customized station for my workshop and I would like to save time on printing but don't want to waist the time if the print fails because I didn't use s. Also, what is the diameter of the paint rack holes? I love your designs!

RedChurch
RedChurch

Hello.
I always try to design my projects so that they do not require any s for printing and that they can be printed on home 3d printers (FDM).

Wherever there happens to be a requirement for a , I try to inform about it in the description.

RPS 150-150-150 marker rack does not require s when the model is properly placed on the table. The box as well as the grille must be placed on the back (back of the module).

RPS 150-150-150 v-ap rack 20b (the holes are the size of Vallejo and Army Painter bottles - the hole is about 26 mm).

Around August 14, 2025 I plan to add instructions for mounting the magnets as well as additional graphics on how to arrange the projects on the table.
It's a lot of work and there are still a bunch of projects in the queue to be published.

More project packs are planned.

Greetings.
gatesc
gatesc

Is there any way that "RPS 300-300-150 rotary corner 1d" can be split in any way to print on a smaller printer? I kind of doubt it, but never hurts to ask. Really want to add that section to my setup, but unfortunately none of my current printers can handle the part size. Thanks in advance.

RedChurch
RedChurch

Hello.
Quietly the project is divided into three parts that can be easily glued together after printing. The parts do not exceed 150 x 150 x 150 mm. All designs with a size of 300 mm are divided for easier printing.
Greetings.

  • 1 j’aime
gatesc
gatesc

That is great to hear. Thanks for the quick response. I guess I have a few more items to purchase now!

  • 1 j’aime
maxgrzeszczak
maxgrzeszczak

Hello! I purchased the model and it looks great, what size magnets should I buy for the whole package?

RedChurch
RedChurch

10 mm x 2 mm

  • 1 j’aime
CouchMunchies
CouchMunchies

Hey there! I bought one of your paint station bundles (awesome design, by the way), and wanted to give you on one of the models so that you're aware of it.

Regarding this model: https://cults3d.emulatorsite.com/en/3d-model/tool/rps-150-150-v-ap-rack-20b

I printed the V-AP Rack in the orientation it would be used for the main base of it (the black part of the example). I've found that doing so caused the entire print to warp shortly after, causing a bend right down the middle of the bottom. This made it so that the actual shelf pieces that hold the paint could not slide in or reach both ends.

To remedy this, I ran the print under hot water so I could bend it to it's correct shape so I can glue the shelfs into place.

My suggestion would be to either specify that the main piece must be printed on its back (so that the first layer forms a U shape), or to add half-inch tall, 5mm wide in the middle between the left abd right wall so that it prevents any warping or bends.

If you need a file or an image for what I mean, please let me know!

  • 1 j’aime
RedChurch
RedChurch

Thank you very much for your and pertinent insights.
I am currently in the process of preparing graphics with information on how to position the prints on the printing table.
In the case of this design, I agree that it needs to be printed on the back wall as a base when printing. I have personally printed this item and have not encountered such a problem as you describe, but I know it could happen.
Your makes you have a real impact on improving this design. I will try to send (within the hour) to the server a revised version with additional reinforcement on the rear.

Thanks again for your .
Regards.

  • 1 j’aime
HammerheadSnark
HammerheadSnark

Hello! I'd love to see the rotary corner 1d be combined with the rounded corner rack, giving a lazy susan of paint pots! As well, having paint pot hole sizes available for Vallejo and Army Painter sized paints that are compatible would be amazing! Printing all the stuff out I purchased now, enjoying the thought of cleaning up my paint station.

RedChurch
RedChurch

Great. I am very glad that the paint station will help you to organize your workspace. When you have a desirability on the countertop it is easier to work.

As for the rotary corner: at one time I designed some tripods that can be modularly (3 modules) inserted into the center of the rotary corner. Unfortunately, I didn't have time to finish them for that I haven't published them yet. I will try to add them to the project in the near future.

Regards.

RedChurch
RedChurch

I have added a RPS 300-300-150 rotary corner 1d v-ap rack. Check it out ;D
paul-0u4h
paul-0u4h

Hello, I purchased the RPS Bundle 01 and the rotary Corner is missing.

RedChurch
RedChurch

Hello.
paul-0u4h from what I checked you have purchased RPS Bundle 02 in which there is no rotating corner.
All components of the kit are listed in the descriptions.
Greetings.
saquet60
saquet60

Bonjour.

Intéressé par votre travail, je viens de vous acheter pour test votre fichier " RPS 150-150-150 boîte à coins arrondis 2d ".

Débutant en impression 3D ( je viens d'acheter une Creality K1 ) je désirerais savoir si il faut rajouter des s avant l'impression ( en particulier pour le fichier " RPS 150-150-150 rounded corner box 2d.stl " ) et si il y a des conseils pour l'impression ??

RedChurch
RedChurch

Hello
First of all I would like to thank you very much for buying my project.

To answer your question: all my projects are prepared in such a way that they can be printed without s on the most budget printer. If there happens to be an element requiring , you will find information in the project description which element requires it.

The only guidelines I give are the settings for the slicker.
Layer height: 0.2.
Infill: 10-15%.
I consider these settings optimal to make the print nice and solid.

Everything else depends on you, your printer, the material you use to print and the settings you make in slicker for your print.

PS. If you're a beginner, : don't be discouraged if you waste your first pounds of material. This is normal when learning. Creality K1 is a fairly automated printer when it comes to calibration, it won't require that much commitment. Spend more time on proper slicker settings and choosing the materials you print from.

PS2. In the near future I will be supplementing the project descriptions with additional graphics showing how to properly set the project in the slicker and which elements need to be glued and on which edges.

Greetings

saquet60
saquet60

Thank you for your quick response.

Could you just tell me the magnets needed to assemble your elements?? Maybe you have an address on the net presenting them..
robouteprime
robouteprime

I think I have purchased all of your files for making your work station, unfortunately I can't find any record or of them. When I go to some of the items under in your info area it says 1 and 1 collection. Is there any way to can see if I did purchase these files from you and explain to me if I did how to them again. Thank you again and I love your work.

RedChurch
RedChurch

Hello @robouteprime
I have checked the list of ed items for your . These are all free items:

RPS 150-150-150 OPEN CORNER TOP BOX
RPS 150-150-150 OPEN ROUNDED TOP BOX
RPS 150-150-150 OPEN TOP BOX
RPS 75-150-150 OPEN TOP BOX
and
ORANGE FUNBOX 6 WALL HOLDER.

If you want to them again, simply go to the tab in your .
buzlightfoot
buzlightfoot

Hi love the whole hit, it looks awesome.
What would be the cost of the whole thing as you have in your pictures?
[email protected]

buzlightfoot
buzlightfoot

The 14cm full kit.
z4cfjy5vdf
z4cfjy5vdf

Good morning!
How many can i have to pay for this project "ORANGE FUNBOX 6 WALL HOLDER" to print this for sell to my city ? please send mi a message to "[email protected]"
skeeper
skeeper

Cool man, i'll check tomorrow for you're profiles. I gained the refund. Sweet.

Thanks
Skeeper

  • 1 j’aime
RedChurch
RedChurch

No problem. Take a look, I try to add new projects and solutions. Head full of ideas only a day has 24 hours xD
PLP
PLP

Bonjour
Merci pour le suivi
Cordialement

  • 1 j’aime