405 commentaires

Dear Liper3D!
Thank you for using my keychain maker program!

As you planned - once you buy my programs, you can use them forever. There are no time limits in the programs. The programs do not use any third-party technologies, so they cannot stop working because of this.

I think the problem is in the settings. I did not quite understand the essence of the problem (I use Google translation from Spanish). Is it possible that you need to check or uncheck some flag on the interface?

Let's solve your problem. If something does not work for you, please send me a printscreen of the problem directly to my email [email protected]. I need to understand more precisely what is wrong, and I will immediately be able to tell you what needs to be done with the program.

Thank you for your !

Dear Kedibaba3D! Thank you for your continued interest in my programs! I your previous messages. Please send me any letter to email [email protected] so that I can send you a personal discount coupon

I sent an e-mail

[email protected]

just replied to your email :)

THANK YOU VERY MUCH, I WISH YOU CONTINUED SUCCESS. I AM IMPATHETIC FOR THE UPDATES OF YOUR PROGRAMS. THANKS =)

Dear Wangodu13! I just sent you a message on your page.

Désolé mais je n’es rien reçu sur ce site

Dear Rsrt2nyqpp! Please clarify, is wangodu13 also your or another person's? You answered in the wangodu13 question thread and I'm trying to figure out if it's the same person or if the question came from different people.

Thank you for your interest to my programs! I just sent you email.

Thank you for your interest!
I once taught mathematics and programming to university students for 11 years :)

Yes, I can teach programming of 3D models. I think the amount of training and financial costs will depend on your experience, what you have already programmed.

Please write me an email to [email protected]

Dear Pabloarigitabueso! Thank you for purchasing my two programs!

More than a thousand people successfully use my programs ASC7 and ASC9. Let's make the programs work for you.

Please tell me in more detail what happens when the program starts.

1) Could it be that when you start the program, a Windows warning like this appears?
https://ibb.co/vxtWkzM
In this case, please click “More info” and “Run anyway”.

2) This program may display an “access denied” message if you run the program from an archive, and it cannot write the model file "amazing.stl" to the same location where the program is located (that is, to the archive). In this case, please unzip the program to any location, for example, to the D:/Amazing folder or to the desktop.

3) On some computers the program starts working if you right-click on it and select "run as ".

Please try this and write if the program works.

Dear Jessefulbrook!
Thank you for your interest in my programs and for purchasing the program!

This is one of my most popular programs: more than 1800 people have ed this program and are successfully using it (430 s from Cults and more than 1400 from other platforms).

Let's make the program work for you.

Please tell me in more detail what happens when the program starts.

1) Could it be that when you start the program, a Windows warning like this appears?
https://ibb.co/vxtWkzM
In this case, please click “More info” and “Run anyway”

2) This program may display an “access denied” message if you run the program from an archive, and it cannot write the model file "amazing.stl" to the same location where the program is located (that is, to the archive). In this case, please unzip the program to any location, for example, to the D:/Amazing folder or to the desktop

3) On some computers the program starts working if you right-click on it and select "run as "

4) You may also receive an "access violation" error message if you enter non-English characters.

Please try this and write if the program works

Hi thanks for replying so quick i have tried to use the STL files it makes wont open in Flashprint. When i try to open it in Flashprint it says theres a error in the file.
When i select repair model it just sits idle trying to repair it.
I left open for about half an hour with no luck on it being able to repair it to open.
I would use cura or a different slicing program but Flashprint is the only program that works with my Flashforge inventor

Flashprint is a rare and rather outdated slicer, so it may not work well with large STLs. The most common slicers (Cura, PrusaSlicer) do not have such problems.

However, I installed Flashprint recently and have been experimenting with it. And I found a way to easily prepare the STL generated by my program for this slicer.

Please use a web service like LowPolyGenerator:
https://lowpoly3d.xyz/
After I ed the STL there, converted it (with default settings or any other) and ed it (it was easy and fast), the model opens normally in FlashPrint.

Thank you for your !
I would be happy to compensate for your time and hassle by sending you some of my other programs of your choice.

hi thanks for the reply im happy with the program as i have a resin printer and the files open fine on lychee. i also have other 3d printers which the stls open fine on there with cura. i wouldnt mind trying some of your other programs if your happy still to send me some to try. i only brought the one as it does a couple of things quickly that i have been looking for. more then happy to try and leave some feed back on printing on a resin printer from some of your programs

This is a great idea, thank you!
Please send me any letter to email so that I can send you links to the programs personally
[email protected]

Dear Ramazanntekyol! Thank you very much for purchasing many of my programs! And thank you very much for your ! I may not immediately react to , deny it, but it always shows the direction of further growth :)

Yes, some of my programs produce 3D objects consisting of voxels. This is a common digital approach: for example, these letters that you read are only 7 pixels high. In the ASC1 program, the height of the letters is 150 voxels - this is a 20-fold reserve!

Usually people print double text illusions with a letter height of 10 mm. Usually, the layer height when printing is 0.2 mm. This means that a letter resolution of 10 / 0.2 = 50 steps in height would be enough. I have 150 steps in height, that is, a 3-fold reserve compared to the printer's capabilities.

In addition, after printing, the details look more beautiful than in the viewer. In this video of mine I showed more than 10 text illusions, they look great, although the height of the letters is only 60 voxels.
https://youtu.be/Evy4t960iwE
And the program has the ability to make the height of the letters 150 voxels, not 60.

But in fact, you are right: the appearance of STL should not raise questions among s. Therefore, I planned to transfer the ASC1 program and several others from voxel algorithms to continuous algorithms. I do not promise that I will do it soon (I am in a hurry to release several fantastic programs soon), but I will definitely do it (probably this year).

So thank you very much for taking my programs seriously and for being interested in me making them better!

Dear Dnjsmalt! Thank you for ing my program!

This program (dual text illusion) is one of my most popular programs. More than 2300 people successfully use the program. Let's make the program work for you.

Please tell me in more detail what happens when the program starts.

1) Could it be that when you start the program, a Windows warning like this appears?
https://ibb.co/vxtWkzM
In this case, please click “More info” and “Run anyway”

2) This program may display an “access denied” message if you run the program from an archive, and it cannot write the model file "amazing.stl" to the same location where the program is located (that is, to the archive). In this case, please unzip the program to any location, for example, to the D:/Amazing folder or to the desktop

3) On some computers the program starts working if you right-click on it and select "run as "

4) You may also receive an "access violation" error message if you enter non-English characters.

Please try this and write if the program works

Dear Kedibaba3D! Thanks for ing my three programs!

Thank you for caring about your computer security and using VirusTotal! It's a great checker to ensure the safety of my programs.

Your picture shows that my program is absolutely safe. Please look at the picture: 71 of the best (THE BEST!) antivirus systems guarantee with their reputation that my program is safe. In case my program harms your computer, you can sue me and all antivirus systems.

Among the real antivirus systems, there is one funny amateur antivirus made by Vietnamese teenage programmers. Please google Bkav Pro. It writes about almost any program that it is infected with viruses. For example, I checked my favorite games of the 90s with it, and Bkav wrote about almost all of them that they are dangerous. Bkav Pro writes that even Word doc files are dangerous. However, when Bkav Pro is used to check really dangerous files, it does not find viruses in them. That is why no one takes Bkav Pro seriously.

Since Bkav Pro does not actually check programs, but only writes that the program is dangerous, I, as a program developer, have no way to prove anything to this Vietnamese "antivirus".

If you were checking a really dangerous file, please see what the VirusTotal report would look like
https://ibb.co/Kxz6Nkw2
If my program was dangerous, all the best and most famous antiviruses would show that the program is dangerous. And the VirusTotal report would not be 1/72, but 65/72.

The VirusTotal instructions say that a file is safe if at least 80-90% of antivirus systems show that the file is safe

Over the past 3 years, my programs have been ed more than 30,000 times, and s have had no problems with security. You can see numerous reviews here and on other platforms.

I am more interested than anyone else in my programs being absolutely safe for s. I have been selling programs for 3 years now (and almost 30 years, considering my programs not for 3D printing). And I plan to sell "Amazing STL Creator" programs for many more years, maybe even decades. Therefore, the reputation of my programs will always be perfect.

Thank you for taking my programs seriously!

Dear Kedibaba3D!
By the way, let me express my iration for your car models! I once looked for something like this for my son, and they seem to be excellent models!

Regarding the font: currently, my programs specifically use the Arial Bold font, as it is the most recognizable after 3D printing.

Your question is probably related to the desire to use your national font. This is very relevant, as 60-70 3D printing people would be happy to use national fonts.

Currently, the ASC11 program only allows to use the English font. But I have long planned to add a module for using any national fonts to all my programs.

This is not as easy to program as for 26 English letters. In many national fonts, it is difficult to separate one character from another, and there are many complications with additional characters above and below the letters. Therefore, I need to take this seriously and program a universal algorithm. I hope to do this in the coming months, update the programs that use the fonts, and you will be able to new versions of the programs for free.

Thank you for your ! You once again emphasized the importance of national fonts for me.

Dear VortexCraft!
Thank you for ing the program!
Thank you so much for sending me a screenshot: and I can immediately see why the error occurs

I see that you have filled in two text fields for one side of the keychain. But there is no text for the second side of the keychain. The program creates the keychain so that one side of the keychain smoothly transitions to the second side of the keychain. And if there is no data for one side, the program may return an error.

Please try entering the same text not in both windows on the left, but in the upper windows on the left and right.

Please write if this solves your problem.
Thank you very much for your .

Dear Caboderoca! Thank you for ing the program!

1) After finishing, the program places the Amazing.stl file in the same folder where the program itself is located. You may be running the program from a zip archive, and the program is trying to write the results file back into the archive. It is best to first unzip the program into any folder, for example D:/Amazing/.
2) Perhaps something else prevents the amazing.stl file from being overwritten. This may happen if the amazing.stl file is opened by another program (for example, a slicer), and the ASC4 program cannot overwrite it.
3) For some s who encounter this error, the application starts working when they select “run as ”.

Please try this and if it doesn't work, please message me.
Thank you for your !

Thank you for your quick response! I had been trying to increase print thickness to 10mm from 8mm. When I left the thickness at 8mm, it worked properly.

Dear Jazbavac! Thank you very much for your kind words!

Please see if this program might be right for you:
https://cults3d.emulatorsite.com/en/3d-model/gadget/app-to-create-decorations

in one of the program modes you can create cake toppers.
https://ibb.co/dsqQdyf8

In that program toppers are created based on the loaded image. Perhaps you meant text cake toppers.

Yes, I meant cake toppers. The app you offered is good, but I need to be able to print words as needed

I plan to release one of the following programs that will allow to create about 10-20 text-based objects. Including cake toppers.
What other text-based objects do you think you and other people might need besides toppers?

What is important is that the text can be in 1-3 lines, I hope Cyrillic will be able to do it. If I can, I will leave some pictures as an example.

https://ukrasizatorte.eu/proizvod/toper-sretna-godisnjica-braka/

https://www.google.com/search?q=toper+za+tortu+srecan+rodjendan&sca_esv=973d1cf420e5fec7&udm=2&biw=1920&bih=953&sxsrf=AHTn8zrDFT2d5ibFx98RV6ftspg_La5hKw%3A1739178509129&ei=DcKpZ7-1B-Ph7_UPmdfUQQ&oq=toper+za+tortu+s&gs_lp=EgNpbWciEHRvcGVyIHphIHRvcnR1IHMqAggAMgQQIxgnMgQQABgeMgQQABgeMgYQABgIGB5I-gxQpQNYpQNwAngAkAEAmAGRAaABkQGqAQMwLjG4AQHIAQD4AQGYAgOgApYBwgIFEAAYgASYAwCIBgGSBwMyLjGgB4kE&sclient=img#vhid=LS4MVWUzrDHpeM&vssid=mosaic

Dear Rackerser! Thank you for your interest in my programs and for your subcription!

On your first month of subscription on Patreon you get the last 2-4 programs. On your second month of subscription you can choose 3 more programs. Starting from your third month of subscription I will be happy to give you access to all my released programs.

Please write me on Patreon so I know what your nickname is there.

wrote to you on patreon :)

Dear Jayz5!
I release updates rarely on purpose, so as not to confuse people.

But about once a year there are program updates that have significantly improved something.

Since you bought the program, you will get the update for free. I will replace the old program with the new one in this product card. At the same time, Cults will send you a message that a new version has been released and you can it.

Thanks for the about emoji and the relief size! I have copied this into my list of improvements. I do not promise that I will implement this quickly, but when I return to improving programs, I try to make almost all the improvements that have accumulated in the list.

Dear Petereater! Thank you for ing my program!

This program (dual text illusion) is one of my most popular programs. More than 3000 people successfully use the program. Let's make the program work for you

Could it be that when you start the program, a Windows warning like this appears?
https://ibb.co/vxtWkzM
In this case, please click “More info” and “Run anyway”

If I misunderstood your question, please write in more detail what the problem is.
Thank you for your !

Dear Jayz5! Thank you for your interest in my programs!
For commercial use of the programs you must be an active subscriber on Patreon for 5 USD/month.

You will be able to sell both the STL created by the program on platforms like Cults. And things printed on a 3D printer based on these STL.

Moreover, if you purchase there an annual subscription for 50 USD, you will receive not only 15 already released programs, but also 6-10 new programs that will be released this year.

Dear Sagalemos! Thank you for ing the program!

This program (switchable business cards) is one of my most popular programs. More than 3500 people successfully use the program. Just two hours ago, one person posted a make-up made by this program:
https://cults3d.emulatorsite.com/en/3d-printing/app-to-create-switchable-business-cards

Some Cults s even sell STL models created by my program (in agreement with me):
https://cults3d.emulatorsite.com/en/s/FAST-AND-COOL/3d-models

Let's make the program work for you.

Please tell me in more detail what happens when the program starts.

1) Could it be that when you start the program, a Windows warning like this appears?
https://ibb.co/vxtWkzM
In this case, please click “More info” and “Run anyway”

2) This program may display an “access denied” message if you run the program from an archive, and it cannot write the model file "amazing.stl" to the same location where the program is located (that is, to the archive). In this case, please unzip the program to any location, for example, to the D:/Amazing folder or to the desktop

3) On some computers the program starts working if you right-click on it and select "run as "

4) You may also receive an "access violation" error message if you enter non-English characters.

Please try this and write if the program works

Dear Levicgrubb!
Thank you for purchasing two more of my programs!

The ASC6 program runs longer than the ASC3 and ASC14 programs

When the program is running, the debug graphics update may stop. It looks like the program is frozen. However, the program continues to run and after some time (about 1-2 minutes) it stops being frozen, displays the message "Ready" in large letters on the interface form, and writes the file amazing.stl to the same folder where the program is located.

So please just wait about 1-2 minutes without closing the program forcibly.

Thank you for your !

Dear 9N6TFNH8DP!
Thank you very much for trying to make the motor working!

Please try these 6 tips to make the motor working:

1) The motor rotates best when it is upside down.
Please see 0:19 at video https://youtu.be/EAZ_LZGE6l4?t=19

2) The more you pre-rotate it, the more friction decreases and the better it spins. The easiest way to get 1000 turns in 3 minutes is to hold the motor by the propeller and rotate the motor.
Please see 0:35 at video https://youtu.be/JlOCYu_Fq1I?t=35

3) This "steam engine" scheme has two dead points from which the propeller will not start to rotate. It starts to rotate best when the propeller is horizontal and the cylinder is vertical.

4) It's better to blow not like this h-h-h-h-h, but like this PPP-o-o-o-h with a sharp front.

5) You can use your hand to help the motor start turning, until the motor is self-cleaned.

6) Place the engine in the water. The moisture then eliminates the gaps between the piston and cylinder, and the engine turns 30% easier.

Thanks to these tricks, the motor should certainly work