26 commentaires

Hi, you should be able to! I've never had to refund anything and I've never been refunded anything, so I can't help you, but there should be an option within your s to refund and state the reason it was a mistake!

Ooooh! 😊😳 Thank you so much, you are so kind 💜💜💜💜✨

Hello! Send me the photo on my Gmail [email protected]! 😊

I use Blender! 😊 Thank you very much!!!

Excellent... It's been years since I played with Blender. Most of my work is in Rhino (architecture and digital fabrication), but poly modeling isn't its strength.

Could you share a photo in Makes? 😊💜💜

Done!

🥺Sorry for the delay, give me a day to take a look and see what could have happened! Nobody has said anything to me until now, thanks for letting me know! You'll have answers soon, sorry for the wait, I've had a lot of work these days!

I just saw it, and you're right, don't include the ears in the folder!😱 Thank you very much for informing me of the error, for the trouble and your help, I can give you a discount coupon for a design that you like of my store, if you want, send me an email telling me what design you would like to have! I'll the zip with the corrected error, thank you very much, Welcey!💜

Hello! A difficult question to answer quickly, it depends on many things 😂

In this type of platform, constancy is rewarded, so being constant is rewarding, but slowly, not all s get designs and are successful at the first moment.

It's complicated with just one platform, you have to know that there is more than one platform to sell, I also know that there are designers who have other ways to have buyers on Patreon and Etsy selling physical prints and stl.

It's complicated to make a living from art in general, but not impossible, in my case I still can't make a living from this alone and Im not a famous , but little by little I see that more followers you have, more sales you have and it also depends on your products, if they are original or beautiful. I've been doing it for a little over a year and little by little I see that it's getting better.

I hope it has helped you!

Thank you for your answer. You were helpful 😊

Hello! To be able to sell any of my products with the commercial licence, you have to be actively subscribed to my Patreon: https://www.patreon.com/PIZZA3D?utm_campaign=creatorshare_creator

Thank you for ask! 💜😊

The file contains 8 dragons stl and 7 AMS files, but during the day I can create a simplified version and it to Cults3D to make it less heavy. I also recommend you to delete the models that you are not going to print to reduce the weight or the AMS if you don't use it. I will the simplified folder today. Thank you very much for your warning! It has been very useful 😊💜

Thanks for coming back so quickly. Didn't realise it was so many files, just wanted to confirm it was correct.

Don't worry, I didn't realise it was too heavy, so you're right, I should have an option where I put variety so you can choose and another Zip for people who can't such heavy folders. Thank you very much!!! 😊 I'll let you know with a message when I add the new zip! ✨

Hi! I use Blender mainly, zbrush for sculpting and bambulab studio.

Hello, the commercial licence will be available this week! I can let you know here if you want or you can follow me on Instagram to stay informed! 💜 Thank you!!

Okay great! I’ll give you a follow.

Patreon is open now! 😊 I give you the link if you are interested! https://www.patreon.com/PIZZA3D

if you have any questions or suggestions, don't hesitate to ask me 💜💜💜

Maybe I could sell it on etsy in the future, but for now I want to focus on selling the digital products and commercial licenses. But I'll keep your advice to think about it, thank you very much for the tips😊😊💜

WoW! Really? Thank you very much!! 💜💜💜🤗

you're welcome! your designs are so colorful and lively. what printer do you use for the multi-color prints? I wasn't sure I 'needed' a full color printer before but after seeing your work... I see why someone would want one!

Depending on the model, the last designs the coloured parts like eyes and parts of the model are separated and then glued, so you can print it in the colour you want. I use the BambuLab P1 printer with AMS but as the AMS takes so long to print big models or I make parts separately or I hand paint some models, still for whoever wants to print by multi-colours I also leave examples of colours in 3mf for printing by colours 💜 So more or less it is compatible with any printer, there is stl and 3mf for whoever likes to print with multi-colours. 😊

oh wow them are done on a single color extruder! that makes them even more genius! where are you from?

Thank you!! 💜💜💓

Hi Kapono! I added a new file, with and without a manual . You were right that my model had a problem, it is now fixed. I am very grateful that you let me know! So, if you talk to me at the email that I have in my profile, I will make you a little gift! 💜

Thanks for informing me about the error, let me take a look at the design, maybe It have an error, if It not I mill make manual for you 💜 I will fix it! I will get back to you with a solution as soon as I can.

This is the first I have heard about the error, I tested it a total of three times. Let me look at the model and tomorrow I will give you a solution to the problem, my sincere apologies. It would also be helpful if we could talk via Gmail to make it easier to understand your problem with photos, thank you very much.

I looked at the model several times and the arm is not connected. Its the normal version of the Gecko and would be its front left leg where it s to the body. If need be we can chat via gmail. Whatever needs to be done to resolve the issue. Thanks!

Yes, please, me on [email protected] and I will give you solutions 😊thank you for your patience and for letting me know about your problems, I'm sorry for wasting your time but I will make it up to you!

Email sent with Pic of file issue.

I've had a quick look at the base of the model and I've seen some small bugs in the mesh that I'll have fixed tomorrow. But as for how it prints, despite this error (which is in a part of the tail) you shouldn't have any problem when printing, considering that I have printed the 3 types of geckos without any problem. I think that the problem you may have had is due to a bad leveling or adherence in one of the corners of your bed, taking into your description of the error and that the base of my model in principle shows no problems so it could have faults in one of the legs. If you think it's not because of that, I'd love to know more about the problem with photos in the Gmail I show in my profile, it would help me a lot to see photos of the gecko placed on the bed in whatever laminating software you use.

You were right about the mistakes in my design, they are all fixed now, however, for the inconvenience I would like to compensate you, me by mail and I will make you a small gift.😊

Let me do a fix on the model today and I will today a new file! I will send you a mail with news, thank you for advise me 🩷

The file is now fixed I think. Please do a check on the new file and let me know if it works in your lamination program. Sorry for the mistakes, and thank you for the patience!

Hello! I had problems with my sciler program Ultimaker Cura because it calculated bad the scale. You have to scale it x100.
Anyway today I'm going to a new file scaled fine. Sorry for the inconvenience and let me know you fix it scaling it x100.

Hello Anagoncia! In approximately one month, commercial licenses will be available from Patreon. I can let you know when it is available!

ok, thank you very much!

Hi! I glued 1 cm or 2.1 cm magnets depending on the piece.

Thank you for advise me! I'm going to see what happend with the model and I will send a new stl in this days and answer better your questions.

Still having problems with the file in Cura.
For a print that fits on the build plate it has to scale it up to 100.000% or else it isn't visible, strange isn't it?
Which program did you use to make the object and what is the size in the document file? :)
Do you use Cura or some other slicer?
Cheers

Its strange because there are people that have printed it without problems. The model have been created in Blender and Cura. Could you give me in my email your for share photos and talk better about your problem? I need to see photos of your problem for undertand it better. Did you open the last one 3D model that I ?
Thank you for your patience.

I'll send you a personal email to your gmail :)
Thank you.

ouch, your email on this site ([email protected]) isn't working... :(

[email protected] 😅😓

I have corrected the Gmail, sorry

Thank you very much, Zaku! First I paint it white with basic acrylic or with an airbrush. Then I paint it with acrylic color. I don't use nothing more.

Thank you. I will paint it the same way.

Let me see the final result 💜

Yes I can! I have the designed idea of ​​the dragon only for do it, more or less in one week you will have it ^^

ty, great, let me know, love your work

I will, thank you ❤

Could you tell me and send me photos in my personal mail for understand it better? I will see the problem and correct it faster than I can. I didn't have problems for print it. Thank you a lot for the message.

I published a new gengar.stl corrected, please, let me know if you have problem with the new archive. Sorry for the inconvenience and thanks for your patience and understanding.☺

Hi, sorry for the late . Took me a while to try again. The file has now worked without problems. Thanks a lot!

Thank you too for your patience, you helped me a lot telling me the error ☺