20 commentaires

hola como estas? utilizo la mayoria del tiempo simplify3d es practico y sencillo, si quiero un poquito de mejor calidad (como en toppers por ejemplo, uso cura) las especificaciones son de 0.2 capa, relleno 100% (esto es opcional puede ser 20% si queres, yo he descubierto que mis costos no varian casi nada en cortantes x eso lo dejo al 100) 3 o 4 capas superiores e inferiores, 2 o 3 lineas de pared.. cualquier cosa me podes consultar, saludos y buenas impresiones

hello how are you? you mean this design?
https://cults3d.emulatorsite.com/es/modelo-3d/variado/hoja-cutter-and-marker-leaf-cutter-and-marker
I just added it to the publication, 5.1x7 and 3.6x5.
Yes, they can be enlarged or shrunk, but you always have to take into the edges, if you see that they change and become too thin, you can use the horizontal expansion to control that and compensate for the change in size.

Yes that one! Thank you so much! I appreciate the quick response and the tip. I'm still learning the ropes a bit so any tip I can get is so helpful.

Pleasure to help, it's something I use a lot, because one can't have all sizes of cutters oneself hahaha. Greetings and good prints!

hello how are you? i am glad you can print them, because i have printed them many times, and i never had any problem, it is one of the markers that i sell the most in my city so i hope you have the same success with those designs that i have, i also use a laminator "simplify3d" that i find more practical for cutters, if you want to try it, it is very practical.
success and thank you!

hello good evening, could you tell me which model has given you any inconvenience? it is one of the models that I print the most and I have never had any problem, but I can check it.

Pack-markers20221013-2910-1t9x9oo
Various files within this pack are not watertight.
Hojitas 1,3,6, Ramada corazones.
I just load these files into Ultimaker Cura to slice them and I get the message on open. Can you try loading them in UC? You will see what I’m talking about.
Thanks

Hello good morning, I am looking at the files mentioned in cura and so far I have not seen anything wrong, I share the capture in the images ed of the markers, the pink markers are from today, I put the 4 that you mentioned .... at this moment I am printing the mentioned ones to be 100% sure that there is no error, could you please re- the files and unzip them again to see if there was not a problem in those steps? I want to detect if the error is or not in my models, since it is difficult to fix something that I do not see the error and that in no purchase I have been mentioned. In a few hours I will have the markers finished.
Please let me know if by doing that you still see the errors. Thanks

Sure send me a picture here or to my email [email protected] and if I can help you I will be happy to do so.

Hello good afternoon, the cutter was tested on different doughs and in no case my customers have had this problem, it has been tested on cookies, fondant and clay.
I hope you can solve it by checking the dough used.

Hello the design of the photo was hand painted, it is made to be hand painted, I didn't make it to print in different colours, sorry for the inconvenience.

hello! how are you? I only make cutters, markers, toppers.
I don't make models of figures.
I hope you can find someone to do it.
Regards

hello! i use photoshop and add the text but you can use the tinkercad site, the sphere and add the text

Hola buen día, creo que se confundió de diseñador xq no recuerdo haber hecho ningún topper con esa inscripción, podría compartirme la publicación por favor?

efectivamente me equivoque, disculpe

Dale no hay problema! Saludos!

hola! pasame un link con alguna imagen y te confirmo, porque me suenan, no he hecho pero las creo posibles, pero si tenes un link de alguna foto para corroborar, te confirmo

whenever you like!

great! yes, let me know if you need any more modifications, if it is for the size you can enlarge or shrink it, you should not have problems in the size changes, but if it happens let me know and I modify the measures in the original model.

Well, I think I understand what you mean, I never worked with soap so I do not know how the process itself is.
I'll share a link with you and let me know if I got the idea right, if you need to modify it I can do it too.
https://cults3d.emulatorsite.com/es/modelo-3d/variado/the-grinch-mitresde

Hi! I'm so glad you like it. Honestly I have never made soap, so if you could instruct me and tell me if you need any specific requirements to make them.
If I can help you I would be happy to.

hola!! mil disculpas!!! ya te envie el correo, chequea q haya llegado por fa y si no se va a spam es:
[email protected]
Denisa