16 commentaires

Bonjour,
J'ai télécharger votre model cependant quand je l'ouvre il est défectueux puis-je réclamé le remboursement de cette achat s'il vous plait.
merci a vous Mephistopheles.

Thank you for the advise.
I tried to isolate the different items in the group. However, with the Prusa software my attempts to isolate the items was not successful.
As such can I requerst for refund of the amount paid by me for the ?
Thanking you in anticipation,
Ramachandran

my repeated attempts to print the model SIGNAL TOWER SET BALTA.STL with PRUSA I3MK3S+ are failing. This file includes 16 individual structures: 4 'T' structures (2 each in front and last rows}, 10 straight long structures in the center of the middle row and 2 ' L' structures one each placed on top and bottom of the middle row. In "printer setting" when 'BRIM" is invoked, BRIM is printed around 14 of the structures, excluding the 2 'L' structures. The 2' L' structures are loosely printed after Z +1.00 level over the "PrintBed" resulting in no adhesion to the PrintBed. This loose print waste (spaghetti) is further damaging the earlier part printed 14 structures. ('T' & straight structures).
As all 16 models are grouped together in one file, I presume. they cannot be isolated and printed partly and individually with different print settings.
Subject to correction, my conclusion is that the 2 'L' structures drawings' base level is not at Z .000 level.
Kindly, guide me on the steps to be taken by me to obtain good prints by ing the correct files or by any other positive moves.

Thanking you in anticipation
Ramachandran

Hi I see other people have asked for them to be single STL files has this been done and if so How do I get them I have paid for the hole lot but as with others I need to print only some not all Best regards
Derek

Do you have an image or drawing of the finished, assembled tool, with dims? I am not sure if this is going to work for me. what I am looking for is a paper corrugator, for paper that is 43 mm wide. I want the corrugations to run in the width direction. So are you saying that the incised roller is the Y dimension, 130mm? how deep are the corrugations? Thanks so much.

Hey I was looking around for good 3d models for articulated fingers and came across a couple broken links to ones that you seem to have taken down. Any chance I could still get those from you?

For reference these are the ones I'm talking about. https://www.mito3d.com/en/3dmodels/designer/Mephistopheles_3D/all/all/latest/1

Let me know

how do I just print the sections that i need instead of loading all of them?

bonjour, j'ai telecharger l'onduleuse mais au montage j'ai beaucoup de soucis, j'ai ete obliger de couper 0.5cm du bas pour mettre le rouleau bas et les trou sont a peine trop raprocher impossible de l'utiliser

Hello. I am interested in buying your creepy metal finger glove extension. Though I have noticed that they are no longer in stock. Here's my proposal: I have a special request, I was wondering if you could make a pair of finger glove extension resembling this https://youtu.be/Lcc3M-3GiWU. if not, I would like a model of the original one you have made

any way to get Articulated Skelington hand 3d model?

I have added a photo of the orientation of the track to the listing. It will fit fine on your build plate. Just separate the tracks and print them individually.

Hi thanks for the reply my build size is 220x220x300 i would like to use them all if possable

thanks
simon

Hi
Please send my your max build size and which ones you’d like to use and I’ll have a look if it’s doable.

down loaded your 00 Gauge Iron Girder Rail Bridge but not able to print it as it will not fit on my ender5 plus it is to big could you
split it up to make it smaller please

thanks
simon

Hey there!! What happened with the articulated fingers? Bring them back please

thanks for posting pics!!