Norwegian inventor/designer/cat owner.
Please don't ask for original design files or parametric files.
If you ask a question about a design, ask under the design so that I can answer there.
👋 Bonjour à tous ! Ce fil de discussion est public, alors restons gentils et respectueux. Pas de publicité, de spam ou de choses désagréables !
🇳🇴 Pays du membre : Norvège
🌐 Langue préférée du membre : Anglais. Vous pouvez traduire en ligne via DeepL.
💡 Vous faites référence à un modèle en particulier ? Ajoutez le lien, le titre ou le numéro du modèle.
🖼️ Vous souhaitez publier des photos ? Utilisez un hébergeur gratuit comme ImgBB et collez les liens dans le message.
✍️ Astuces de rédaction : Utilisez le format Markdown pour structurer vos textes et les rendre plus lisible
Hello, it seems that the files for the rear wings are missing. Would it be possible to make them available? These are the only files I’m missing to complete my model, which is a bit frustrating.
Rear wings for what?
Yes, these ones – they are not included. https://ibb.co/03tKKhQ https://ibb.co/CZJKJmM
They're there. They're called Hstab01L and R. They are horizontal stabilizers, not wings.
Thanks a lot, no idea how I missed that!
No problem.
Hi. I have printed your plane. Project is awesome, but i think, thats would be better to print it in vase mode, and with ASA, or ASA-light foam. Could you please base files, like STEP, or whatever, so i could redesign some stringers and volumes, sutable for vase print?
i was talking about L-39, btw
Sorry I don't release parametric models of my plane. I want to make it for vase mode later at some point.
Hi, do you think it would be possible to request a modification to L-159? I can supply the necessary documentation and dimensions... unfortunately my knowledge in 3d modeling is pathetic... thank you in advance for your reply
Hi , Your kyosho f40 wheels look amazing. Is it possible to get a copy without the built in s? Thanks
Can you not separate them in your slicer? In Simplify 3D I select "separate connected surfaces" and it makes them separate parts which you can delete.
Hi!
I’d like to print this part for a fun competition a customer is hosting at an event, where participants will guess what the item is.
Are we allowed to purchase the part and use it for this purpose under the existing license?
Grateful for a quick response.
Sure. I have no problem with that.
Great, thank you!
1:32 Scale C-130 Hercules RC Model for Vase Mode Printing , wollte wissen ob mein drucker mit dem LW pla auch zurecht kommen würde . Mein drucker ist der Anycubic kobra 3 combo .
Hallo,
ich habe eine Frage zu Ihrem LW-Pla
Welches haben sie verwendet Hersteller das weiße sieht sehr gut aus.
Gruß Frank
Hello,
I have a question about your LW-Pla.
Which manufacturer did you use? The white one looks very good.
Best regards, Frank
I have only tried Colorfabb LW-PLA.
Hey, found your C-130 in 1/32. I would like to know your opinion if it would be possible to just scale all files up to 1/24 and 1720mm wingspan?
Or do you think there will be issues?
Kind regards Cedric from 😊
I think it will work fine. Things like servo pockets will scale the same amount but that should be workable. The ts between sections are made to work with 0,4 mm nozzle single wall prints so if it's printed significantly larger the ts might become slightly loose which has to be filled with glue. It's a bigger problem if the model is scaled down in size.
do you have a build video for the c130?
do you have a build video for the c130
Hi i am printing your beutifull c 130
Cant find the file for the elevator tabs that conect to the control rod
Controlarm01.stl should be it. One of the illustrations shows how it's used.
Just wondering, when you say you're "not interested" In the FWD touring car project anymore, does that mean that you are no longer deg cars/planes or that you have moved on to another project?
All of your rigs are top notch, very well done!
Hallo grüße sie
Ich habe mir die Hainkel gedruckt sehr schön geworden
Nur habe ich das mit dem Schwerpunkt nicht verstanden, können Sie mir sagen mit dem 83mm von wo aus
From the leading edge. There are bumps under each wing02 to help find the spot.
Hallo grüße sie
Ich wollte heute die linke Fläche drucken leider fehlen die STL Datein ,also es sind nur die Rechte Wing 1 bis Wing 03 wo kann ich sie finden ich wäre ihnen dankbar
Mirror the wing in the slicer to get the opposite side. There's no point in ing mirrored parts to Cults as it's just a waste of server space.
My mistake, when I unzipped the I had two g-code files. I didn’t see the second folder which has the separate STL files for the cylinders, valve cover, and eyebrow cooling ducts and others.
I am good to go. Thanks for your patience….
I purchased your 3D Cub engine files a couple of years ago. I want to size for 1/5th scale and have adjusted the size to 80% in Cura 5. The print time is about 20 hours and would like to ungroup to lower the print time. I am unable to do this in Cura 5. Is there something you can do from your end to help?
Thank you.
The Zip file contains all the parts separated. Re the files if you didn't get the zip file. It's available from your s under "s"
I reed the zip file and when I load 25 dummy I still have all the parts get loaded and I can't ungroup to separate the parts from the build plate. Any suggestions?
Thank you.
There's a Zip in the downladed zip file. 25dummy.zip should contain 8 different STLs.
I just ed it myself to check.
Greetings. I did the maiden flight on the L-39 the other day. What a dream to fly. Excellent design. I also ed your files for the ESM Mustang, as I am currently building a 1/6th P-51D from FokkeRC. There is not a lot of detail provided in the short kit. Would it be possible for you to do the gun ports on the wing LE? The exhaust detail looks like it will work perfectly. Thanks.
Hi,. Congratulations on the maiden. I might do more P-51 stuff later but I'm busy with other stuff now. I'm out of the RC plane hobby at the moment.
G'Day Mate, The Rocketeer here from Down Under. I printed the C-130 Hercules in prototype build and now a second build. I am finding difficulty in assembling the open and closed parts. I understand the seam and frame parts will be tight, but I seem (excuse the pun) to have an overlap on one side by a few mm. Did you shave the entry point down to make them align and fit? Beyond that it is a fantastic and fun build.
Hi. No it should fit together. Did you print with more than one wall? The open end can't have more than 0,4-0,5 mm wall thickness.
Hei, jeg holder på å printe en covling til en T-28 Trojan og kjøpte din "dummy motor",og lurte på om du kan du sende meg den fila som OBJ så jeg kan modde den selv?
Hullet er for lite til at propeller hub'n kommer ut og må være minimum 33mm pluss noen ekstra hull til kjøleluft.
Mûssen alle Kabinen teile ausgeschnitten werden also so das man auf beiden Seiten durchklicken kann
Ist es normal das bei den Kabinen teilen hinten das so zu sein muss weil bei denn einen Bild von der Kabine sieht man das es hinten hohl is also kwasie auf is bei mir is es zu weil es so gedruckt wurde
It should have a couple of layers first to make it closed. Then you cut out some of it to get access to the inside. It makes it stronger and easier to print.
Hallo ich hab eine Frage zu der c130 mit wie viel Prozent fûllung man die drucken muss
Hi how are you how much you charge in print mr2 body for rc car and shipping to Texas 77088
Hi. Sorry I don't print for sale.
How much you charge for print mr2 body for rc and shipping to tx 77088
Hello,
I'm excited about your Bronco parts.
But do you also have the main landing gear for printing?
Have a nice Christmas and a good start to the new year.
Best wishes
Thomas
Best wished to you too.
I made my landing gear from steel tubing silver soldered together. I made some 3D -printed parts for the nose gear but they've got problems.
Thanks for the quick reply, I found something on Google under "bronco-inspired-left-main-landing-gear". I'll try to build something for myself with it.
Hello, would it be possible to get more information about connecting the 4 motors to the 4-in-1 ESC, please? Thank you very much.