👋 Bonjour à tous ! Ce fil de discussion est public, alors restons gentils et respectueux. Pas de publicité, de spam ou de choses désagréables !
🇨🇿 Pays du membre : Tchéquie
🌐 Langue préférée du membre : Anglais. Vous pouvez traduire en ligne via DeepL.
💡 Vous faites référence à un modèle en particulier ? Ajoutez le lien, le titre ou le numéro du modèle.
🖼️ Vous souhaitez publier des photos ? Utilisez un hébergeur gratuit comme ImgBB et collez les liens dans le message.
✍️ Astuces de rédaction : Utilisez le format Markdown pour structurer vos textes et les rendre plus lisible
Hi there! I was wondering if you would allow me to use your Great Dane model for commercial use? The finished 3d printed model of course. I have a few other models of the same animal, but yours is by far the best! Also wondering if you take commissions? Looking forward to hearing back. Thank you!
Hi, you may sell your printed tanks, but STL files may not be part of the sale. Regards Lubos
Thank you so much!
Hello,
I am looking for a MERKAVA III in 1/10
Hello, Merkava III. is here: https://www.3dprintedtanks.com/
I do not have any e-mail from you.
check email
Green fillament is original czech: Plasty Mladec metallic green PLA 1,75 mm
https://www.filament-pm.com/filament-1-75-pla-metalic-green-1-kg/p75
Hi, yes, tracks are little sensitive to printer's settings.
First you have to well calibrate your printer, to be sure it extrude right ammount of fillament.
Sometimes PLA needs to be underextruded (92-96% of normal extrusion ammount).
To print overhangs sucesfully there should be these seting:
extrusion width 0,5 mm (in case you have 0,4 mm nozzle)
layer height 0,15 mm (0,16 in case of 8x8 screws)
extrusion cooling at 100% (PLA)
printing speed at 80 mm/s and external perimeters at 30 mm/s
temperature at 220°C
Happy printing.
Thanks for the really cool tank model, I was wondering if you have models that might have more relief between the tracks. I have two printers and I can't seem to find settings that will allow the tracks to function after printing. one is a flashforge dreamer and the other is a ender 5, the ender with its bowden tube extruder is having some issues printing square corners, but the dreamer does a much better job however they are still coming out fused which is unfortunate. :( Anyway the tracks are fusing together I know if they had more horizontal relief between the tracks. any comment or assistance is appreciated.
Hello, What green filament have you used?
I would like to purchase and the IS-1 RC tank STL files.
Hello, thank you. Please go to my website: https://www.3dprintedtanks.com/english/
and you can buy any STL you want. With regards Lubos Hort