60 commentaires

thanks a lot! I still have some models to publish 😁

Ooooooh so exciting! I hope it's a churchwarden pipe mold! I will be the first to buy it!

I will take it into 😜😁

Hello! Looking at the images of your print, it has warping in the corners, which is why they didn't come out straight, and I don't understand what happened to the either, but the model itself is fine, in fact it has been ed for quite some time with many sales and 0 complaints, The model works perfectly, in fact you can see in the photos the impression that it is completely united. Check the settings on your printer and try to fix the warping as a first step, you will notice the change immediately :) I hope I have helped you, greetings!

I followed the instructions you provided in the description of the webpage and the 2 images with the parameters so that I didn't have any problem or inconvenience, also the photos you mentioned of the model already printed doesn't guarantee nothing because it doesn't include any picture of the mould pieces put together so I can't know for sure it turned out fine and straight when you printed it, there's no such photo of the impression pieces united in the archive or the webpage.

Hello again! You should check your printer carefully to solve the warping as I told you, here I am ing by the same means that you indicated to me your images 3 photos of the same impression that appears in the photos on the website, yes it is true that not from the angle that you need it but they are there, however I leave you the links here:
https://ibb.co/BTKqqMy
https://ibb.co/z4YtP5Q
https://ibb.co/mc8YsS8
I hope I have resolved your concern, have a good day 😄

You didn't mention that anywhere, I followed all the instructions you provided to prevent something like this to happen so your information is incomplete

Your printing has failed due to different factors unrelated to the 3D model itself, the warping can be due to the type of material, quality of the material and if it does not have humidity, ambient temperature, type of adhesion surface... I give the parameters that I used and You have evidential proof that the model is 100% effective (many s it with their purchases and 0 problems) I insist, it has a warping problem completely unrelated to the model, I cannot refund you For this reason, it is something that you must know how to solve since it is your printer, your environment, material, etc. all the best!

Then don't include that information if you're going to blame it on me. I only followed your instructions because I didn't want you to say it was my fault and those are the results. I bought both the model and the information I didn't only bought the model and it didn't work now I don't want to do another try and you to say it is because of my configuration.

Hello! I don't blame anyone, I simply try to help you have an optimal impression because the model is completely functional, if you don't like the answer I can't do more, I even had to take more photos exclusively for you, and the information to print it is enough (the model has been ed for years with many s and no one has complained, much less about warping...because it is understood that it is a printing error, not a design one.) But as I say, I can't do more. All the best.

Again, if that information didn't came in the same archive the results would be up to me but now if I don't want to dismiss it because I don't know how it's going to turn out and I can't keep printing it again and again until it comes out right, I don't have material to waste trying. I can't even have someone else print it for me because it it's going to came out the same because that printing problem has to do with the design because you did the configuration and included it for a reason.

The information is already on the same website, in fact using "edge" is specifically for that, so that the "warping" effect does not happen.. even in the preview of the model it looks completely straight.. it has all the evidence that The model has no problems but it insists on trying to obtain a refund, as I said in the previous comment, I can't do more if you only think about a refund, greetings.

I'm talking about the file that I bought and what it contained, you don't want to give me a refund and you're not offering any other options and you're not answering anything of what I wrote.

Hello! Yes, you can sell prints of my models, the only requirement I ask is that you name me as the original creator and send me a screenshot of where the model would be sold to the email [email protected]
Greetings and have a good day :D

ok, thank you very much, I'll try to buy several designs, I'll try to choose first...

Hello! Thank you for writing to me, currently the drivers I have are designed for cars, although some may be useful to you, however, in 2025 I will resume the series and will take into your need 👍

Hello! thanks for writing to me :) I'm sorry but I put the description wrong, it is designed for a transparent acetate since it is cheaper, easy to manipulate and fits well in the slots, a glass would also make the case too heavy in the front in addition to taking 1.2 millimeters more out of it. of space for a car. Tomorrow I will update the description again. All the best!

Hello! For that scale they would be too small and surely the very fine parts would not come out, they would have to be modified, if the model does not have fine parts (such as several of the pilots) would it be possible. I hope I have helped you, greetings!

Hello! Thank you for being interested in my models :D Currently I only have two molds but I don't rule out making more. If you want, write to me at [email protected] and tell me your ideas, maybe I can do something. All the best!

Hello! and thanks for writing to me :) could you send me photos to email [email protected] about the problem you are experiencing? so I can help you in a faster way 👍🏻 All the best!

Hello! Just go to the "1:32" folder and there will be the figures at that scale, then drag them to your laminator and you can prepare the print :) All the best!

Salut! Il y a quelques chiffres qui peuvent être utilisés, dans mon profil vous pouvez facilement les voir :) Veuillez noter que le fichier doit être installé avec un décompresseur de fichiers tel que Winrar, WinZip ou similaire pour décompresser le package et supprimer les modèles, ceux-ci sont classés par tapis en cours de route, j'espère les avoir là, salutations !

Salut! Merci d'avoir acheté mes modèles, les fichiers sont compressés en RAR, ouvrez le package avec winrar ou winzip et vous pourrez voir les fichiers STL. Faites glisser les fichiers STL sur le bureau puis vers le logiciel de plastification (Cura, Simplify, Prusaslicer, etc.). Vous ne devriez pas avoir de problèmes. J'espère avoir aidé :)

Bonjour ! Merci pour votre réponse Winzip est payant merci de me rembourser le montant de ma commande ou de m'envoyer un fichier STL non compressé.
Cordialement Christian

Salut! Tout d'abord, je suis désolé du retard de réponse, mais en raison des vacances je n'ai pas été disponible, il n'est pas nécessaire d'utiliser winzip en tant que tel, vous pouvez utiliser winrar sous sa forme gratuite, vous n'aurez aucun problème.
Si vous ne parvenez pas à l'ouvrir, écrivez-moi à [email protected] et je vous l'enverrai décompressé.
Salutations et bonne année! :)

Hello! Write to me at [email protected] with your proposal to serve you in a more personalized way, I will be happy to respond.
All the best!

Hello and thank you for the , I'm glad to know that you like my work :D Sitting people I have some in the "people" series in case any are useful, anyway I will keep this in mind for future packages. Good weekend! :)

Hello! I am sorry to inform you that at the moment there are no discounts, the prices of the packages are quite affordable for the work involved, I hope you understand.
All the best! :)

Hello! The truth is, I couldn't guarantee if the polygons would be very noticeable, for 1/18 there is no problem, it would be to try... surely there will be no problem if there is a good paint job afterwards :)

Salut! Envoyez moi les photos à [email protected] en me parlant de votre projet et je vous répondrai dans les plus brefs délais :) salutations!

Hello! What specific model are you referring to and what printer did you use?

I am very happy to know that :) What I would advise you to do is, as much as possible, to use resin printing since you will obtain infinitely better finishes, especially for small scales.
Take into the physical limitations that the fdm print has on this and there are very fine parts that no matter how much you adjust, fdm will not be able to reproduce them correctly, especially parts like the fingers.
On the subject of filleting software, I personally use Prusaslicer, although Cura and Orca are not far behind either, you should test the results you get with one and the other to find out which software you feel more comfortable with.
If you have any questions regarding the models, you can write to me at [email protected]
All the best!

Hello! I wish you a good start in this world of 3D then hehe I am currently developing a series of figures for these purposes, the most suitable for the public would be the "people" series, in which the same package includes each figure in 1:64,1:43,1:33 and 1:18 scales, the The main themes are civilians, police / security forces, mechanics, pilots and on demand, this last one I am doing at the request of my followers :) Also in my profile I have several things designed for modeling, maybe by scaling them I can use them in 1:32 since I mainly design for 1:64. If you have any questions ask without obligation 😁

Hi KEVGOING3D, thanks for ing my models :D Have you tried to unzip with WinRaR?

hello! Thank you for ing my models, the files are compressed in RAR, open the package with winrar or winzip and you can see the STL files. Drag the STL files to the desktop and then to your laminator software (Cura,Simplify,Prusaslicer,etc) You shouldn't have a problem. I hope I have helped :)

Salut Dans mon profil, vous pouvez voir plusieurs ensembles de figures humaines avec différents thèmes préparés pour quatre échelles différentes dans chaque ensemble, y compris l'échelle 1:64. Avec la résine vous n'aurez aucun problème 👍🏻 Salutations!

merci beaucoup de votre reponse

Hello! The answer to your request is yes, the only thing I ask is to name me as the designer of the models and that you send me the links of the ads to [email protected] The only thing I do not allow is the sale/distribution of the digital files. All the best!

Thanks. It is just for fun to freinds and mabey on local Market in town

Bonjour JMDE137, actuellement je n'ai rien d'inspiré de cette époque, je le garderai en tête pour les futurs colis 😁

Hello NIHO3D, at the moment I only have military police figures, but I don't rule out making military packages as well.
You can check among the 3 "police department" sets that I currently have ed, maybe some figure will help you :)